A relativistic ke calculator finds the kinetic energy of an object that moves at a speed close to the speed of light, where the classical formula half times mass times speed squared is no longer accurate. Enter the mass and the speed and the page gives the energy in joules, the Lorentz factor and how far the classical answer is off.
How to use the relativistic ke calculator
- Choose US or metric units for the mass.
- Enter the mass of the object.
- Choose how the speed is given: a fraction of c, km/s or m/s, and enter it.
- Press Calculate.
Total energy and rest energy
In special relativity, the total energy of a moving object is E = γ m c², where m is the rest mass and γ is the Lorentz factor, and the kinetic energy is the total energy minus the rest energy [1]. So the kinetic energy is KE = (γ − 1) m c². The page words it as the energy minus the rest energy, and the form (γ − 1) m c² follows by algebra from the lines it shows. An object at rest still has the rest energy m c²; only the part above that is kinetic.
The Lorentz factor
The Lorentz factor is γ = 1 ÷ √(1 − v² ÷ c²), where v is the speed and c is the speed of light [1]. It equals 1 at rest and grows without limit as v approaches c. At half the speed of light γ is 1.1547, at 0.9 c it is 2.2942, and at 0.99 c it is about 7.09. The calculator shows γ with eight significant digits so that you can check each step by hand.
The speed of light
The calculator uses c = 299,792,458 metres per second, which the Wikipedia article gives as an exact value [2]. Because the value is exact, there is no rounding error in the constant itself. Speeds given in kilometres per second are multiplied by 1,000, and a speed given as a fraction of c is multiplied by that number. A speed equal to or above c is rejected, because γ is not defined there and a massive object cannot reach c.
A worked example
Take a 1 kg mass moving at half the speed of light. Then β = 0.5, γ = 1.1547 and KE = (1.1547 − 1) × 1 × 299,792,458² = 1.3904 × 10¹⁶ joules. The classical value is ½ × 1 × (1.4990 × 10⁸)² = 1.1234 × 10¹⁶ joules, so the relativistic energy is about 23.8% larger. The rest energy is 8.9876 × 10¹⁶ joules, and the total energy is the sum of the two, 1.0378 × 10¹⁷ joules.
Low speeds and the classical formula
At a low speed the relativistic kinetic energy is approximated well by the classical kinetic energy ½ m v² [1]. The page gives a correction of 0.0417 joules per kilogram at 10 km/s, and 417 joules per kilogram at 100 km/s [1]. Enter 1 kg at 10,000 m/s and the calculator gives 5 × 10⁷ joules, with the relativistic value larger by about 0.0417 J, which agrees with that correction and shows that for everyday speeds the classical formula is enough.
Why γ − 1 is computed in a special way
If you subtract 1 from γ on a calculator at a low speed, the two numbers are almost equal and most of the digits cancel. To avoid this, the page computes γ − 1 as β² ÷ (√(1 − β²) × (1 + √(1 − β²))), which is the same number written without a subtraction of nearly equal values. This is our own working, not a formula from either source, but it is plain algebra and gives the same result in the cases where the plain form is accurate.
Energy units
The result is in joules, the SI unit. One joule is one newton metre, or one kilogram metre squared per second squared. For a feel of the scale, the kilogram at half of c carries about 1.4 × 10¹⁶ joules, a figure that is far beyond everyday use. A US mass in pounds is converted to kilograms using the standard factor of 0.45359237 kilograms per pound before the energy is found.
Limits of the calculation
The page treats a single point mass in one inertial frame and does not include rotation, internal energy, gravity or the energy of fields. The kinetic energy depends on the frame in which the speed is measured. Real particles in accelerators are often described by their momentum or their total energy instead, and those need different inputs. For those problems, use a tool built for particle physics.
Where to use it
Students use a relativistic ke calculator to see how the energy compares with the classical value as the speed rises. It also helps to check homework on special relativity, to compare particles such as electrons or protons at a fraction of c, and to see why no object with mass can be accelerated to the speed of light: the energy needed grows without limit as the speed approaches c.
Comparing particles
The same formula applies to any particle, if you know its rest mass and speed. An electron has a rest mass of about 9.109 × 10⁻³¹ kilograms, so at 0.5 c it carries only about 1.27 × 10⁻¹⁴ joules, yet the ratio to the classical value is the same 1.238 for every mass at that speed. The ratio depends only on the speed, not on the mass, which the comparison line in the results makes visible. This is why the factor is a property of the speed alone.
Reading the comparison line
The result line says how many times larger the relativistic energy is than ½ m v². At 0.1 c the factor is about 1.0076, so the classical error is below one percent. At 0.5 c it is 1.238, at 0.9 c about 3.2, and at 0.99 c about 12.4, so the classical value falls far behind as the speed nears c.
Common mistakes
- Using a speed that is the percentage of c. Enter 0.5 for half of c, not 50.
- Forgetting the rest energy. The kinetic energy is only the part above m c².
- Using the classical formula near c. It underestimates the energy a lot.
- Mixing the mass units. Pounds and kilograms differ by a factor of about 2.2.
What next
Use this often? Add Relativistic to your Home screen.
Frequently asked questions
What is a relativistic ke calculator?
A tool that finds the kinetic energy of a mass moving at a speed close to light, using the Lorentz factor.
What is the formula for relativistic kinetic energy?
KE = (γ − 1) m c², the total energy γ m c² minus the rest energy m c².
When does the classical formula work?
At low speed, where ½ m v² is a good approximation of the relativistic value.
Can an object with mass reach the speed of light?
No: the Lorentz factor and the energy grow without limit as the speed approaches c.
What value of c does the calculator use?
299,792,458 metres per second, the exact value.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.