A radiation pressure calculator finds the tiny push that light puts on a surface, or the huge pressure of radiation inside a very hot body. Enter a star's luminosity and distance, or an irradiance, and choose how reflective the surface is.
How to use the radiation pressure calculator
- Choose what to work out.
- Fill in the luminosity and distance, the irradiance, or the temperature.
- For light, add the reflectivity and the angle if you wish.
- Press Calculate.
What radiation pressure is
Light carries momentum, so when it is absorbed or reflected by a surface it pushes on it. The push per unit area is the radiation pressure. For a beam that is absorbed, the pressure is the irradiance divided by the speed of light, P = I ÷ c, where I is the irradiance in watts per square metre [1]. The effect is small in daily life but it matters for sails, dust and stars.
Absorbing and reflecting surfaces
A surface that reflects the light all the way back receives twice the push, because the momentum of the light is reversed as well as stopped, so a perfect mirror feels 2I ÷ c [1]. For a partial reflector with reflectivity η, the pressure is I(1 + η) ÷ c [1]. A factor x can express the same idea: 1 for an opaque surface and 2 for a reflective one, with real materials in between. The calculator shows both limits.
Light from a star
For a star, the irradiance at a distance R is the luminosity L divided by 4πR², spread over a sphere. Combining this with the pressure formulas gives p = x L cos²α ÷ (4πR²c), where x is 1 for an absorbing surface and 2 for a mirror; this combination is our own working. With the Sun's nominal luminosity of 3.828 × 10²⁶ watts [3] and a distance of 1 au, a black surface feels about 4.54 micropascals. The calculator works the irradiance first, then the pressure.
The angle
If the light does not arrive along the normal, the pressure falls. Wikipedia gives the factor cos²α for a surface at an angle α to the beam [1]. At 60 degrees, the pressure is a quarter of the head-on value. Leave the angle blank for head-on light. The angle must be less than 90 degrees, where the light would only graze the surface.
A worked example
Take the solar constant of 1,361 watts per square metre [1]. Divided by the speed of light, 299,792,458 metres per second, it gives about 4.54 micropascals for an absorbing sheet facing the Sun, which agrees with the value Wikipedia gives [1]. A perfect mirror at the same distance gets 9.08 micropascals. That is millions of times smaller than the pressure of the air, our own comparison.
Pressure inside a hot body
For a body in thermal equilibrium, the pressure of radiation is p = u ÷ 3 = 4σT⁴ ÷ (3c), where u is the radiation energy per unit volume [1] and σ is the Stefan–Boltzmann constant [2]. It rises with the fourth power of the temperature. For a solar corona at 5,000,000 kelvin, the calculator gives about 157.6 gigapascals.
The radiation constant
The pressure formula can also be written with the radiation constant a, where a = 4σ ÷ c, and p = aT⁴ ÷ 3. The pages we read give no numerical value for a, so we worked it out from σ and c: about 7.566 × 10⁻¹⁶ J/(m³·K⁴). This is our own working. It gives the same pressure as the formula above.
Which constants are used
We use c = 299,792,458 metres per second, which Wikipedia gives in its optical tweezers example [1], the Stefan–Boltzmann constant σ = 5.670374419 × 10⁻⁸ W/(m²·K⁴) [2], the nominal solar luminosity of 3.828 × 10²⁶ watts [3], and 1 au = 149,597,870,700 metres. The au value is the standard figure, and we added it ourselves.
Limits of the formulas
The star mode treats the light as a parallel beam from a point source, and the temperature mode is for a body in thermal equilibrium. Real surfaces fall between a black body and a perfect mirror, so check the reflectivity that you enter.
Using the results
Radiation pressure is why a comet's dust tail points away from the Sun and why solar sails are proposed for spacecraft. A sail with an area of one square kilometre at 1 au feels a force of about 4.5 newtons if absorbing and 9 newtons if reflecting, our own working from the pressure and the area. Use the tool to compare distances, surfaces and angles, and check the units.
Reading the two limits
Every result in the light modes shows the pressure for your chosen reflectivity and then the two limits: a fully absorbing surface and a perfect mirror. A real material such as aluminium foil or a dark film falls between these, so the limits bracket the answer. If you are unsure of the reflectivity, enter 0 and 1 in turn and read the range. Leave the reflectivity blank and the surface is taken as black [1].
Why the pressure is so small
The pressure of sunlight at Earth is a few micropascals, millions of times less than the pressure of the air. A sail therefore needs a huge area, and a very low mass, before the push is useful. Closer to the Sun the pressure rises as the inverse square of the distance, so halving the distance gives four times the pressure. Try 0.5 au in the star mode to see this.
Common mistakes
- Forgetting that mirrors feel twice the pressure. Set the reflectivity.
- Entering the angle from the surface. Use the angle from the normal.
- Using au for the irradiance mode. Irradiance is in W/m².
- Treating the star mode as internal pressure. Use the temperature mode for that.
What next
Use this often? Add Radiation Pr to your Home screen.
Frequently asked questions
What is a radiation pressure calculator?
A tool that finds the pressure that light or radiation puts on a surface, or inside a hot body.
What is the formula for radiation pressure?
P = I ÷ c for an absorbing surface and 2I ÷ c for a perfect mirror, where I is the irradiance and c the speed of light.
How big is the radiation pressure of sunlight at Earth?
About 4.5 micropascals on an absorbing surface and about 9.1 on a mirror.
Does the angle of the light matter?
Yes. The pressure is multiplied by the square of the cosine of the angle from the normal.
How is the pressure inside a star found?
With p = 4σT⁴ ÷ (3c), which grows with the fourth power of the temperature.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.