A qr code reader finds a QR code in a picture and shows the text hidden inside it. This one works from a photo, a screenshot or an image you paste, with no camera needed, and it tells you whether the code holds a web address, Wi-Fi details, a contact card, an e-mail address, a phone number or plain text. The picture is read in your browser and never uploaded.
QR codes were invented by Denso Wave in 1994 to track car parts and are defined by the standard ISO/IEC 18004. [1] They are now on posters, receipts, tickets and menus. Reading one from a saved picture is handy when the code is in an e-mail, a PDF screenshot or a photo someone sent you.
How this qr code reader works
The picture is scaled down if it is very large, then handed to ZXing, an open-source library that reads many kinds of barcodes. [2] The tool looks only for QR codes. If the first try fails it turns the picture a quarter turn, tries a second way of turning the picture black and white, and tries a version with the light and dark swapped, which helps with white-on-dark codes. The text that comes out is then sorted into a type.
Step by step
- Choose a picture, drop it on the box, or paste a screenshot with Ctrl+V or Cmd+V.
- Wait a moment. The picture appears with the text it holds.
- Read the type and details in the table, copy the text if you need it, or press Clear to read another code.
What a QR code can hold
A QR code stores bytes, numbers or letters, and the meaning comes from how the text is written. Wikipedia lists web addresses, contact cards in vCard format and Wi-Fi network details as common examples. [1] This tool recognizes the following:
| Starts with | Type | What is shown |
|---|---|---|
| http:// or https:// | Web address | The full address |
| WIFI: | Wi-Fi network | Name, security, password, hidden or not |
| BEGIN:VCARD | Contact card | Name, organization, phones, e-mails |
| mailto: | The address | |
| tel: | Phone | The number |
| SMSTO: or sms: | Text message | Number and message |
| geo: | Location | Latitude and longitude |
| anything else | Plain text | The text as it is |
Staying safe with QR codes
A QR code hides the address it points to, so you cannot tell where it leads by looking. Malicious codes can lead to harmful pages, and stickers have been placed over genuine codes, for example on parking meters. [1] That is why this page shows the address and does not open it. Read it, check the domain name, and only then type or paste it into your browser. Be careful with a Wi-Fi code too, because it contains the network password in plain text.
Capacity and damage
QR codes include Reed–Solomon error correction at four levels, which can recover roughly 7, 15, 25 or 30 percent of the code when parts are damaged. Damage to the three large corner squares can still stop a scan. [1] If a code fails to read, a sharper or larger picture usually helps more than any setting.
Reading a Wi-Fi or contact code
A Wi-Fi code is a short line of text that begins with WIFI: and lists the network name, the security type and the password, each marked by a letter. A contact code is a small vCard with a name, organization, phone numbers and e-mail addresses. When the tool sees these, it breaks the text into separate rows so you do not have to read the raw line. Characters that are part of a name or password, such as a semicolon, are stored with a backslash in front, and the tool removes that backslash when it shows the value. The original text is always shown in full above the table, so nothing is hidden or changed.
Common reasons a code will not read
- The picture is very small, so each square of the code is only a pixel or two wide.
- The code is cropped, with one of the three corner squares missing.
- A logo covers too much of the middle of the code.
- The picture is a photo of a screen with moving stripes or glare.
- The code is not a QR code at all but another type, such as a Data Matrix or a barcode.
Tips for a successful scan
- Crop close to the code, but leave a blank border around it.
- Avoid glare and shadows. A flat screenshot reads better than a photo at an angle.
- Use the original image file rather than a screenshot of a screenshot.
- If a code is shown on a screen, take the screenshot at full size.
- This tool reads QR codes only. For product barcodes such as EAN or UPC, use the barcode scanner.
Everything is processed on your device. If you want to make your own code, use the QR code generator on this site.
What next
Use this often? Add QR Code Read to your Home screen.
Frequently asked questions
How do I use a qr code reader without a camera?
Choose a saved picture or screenshot, or paste an image from the clipboard. The tool reads the code in the picture and shows its text.
Is my picture uploaded?
No. The picture is read in your browser on your own device and is not sent to any server.
Does it open links for me?
No. The address is shown so you can check it first. Open it yourself only if you trust it.
Why is no QR code found in my picture?
The picture may be blurred, too small, cropped through the code or shown at a steep angle. Try a sharper, closer picture with the whole code in view.
Can it read barcodes like EAN or UPC?
No. This tool looks only for QR codes. Use the barcode scanner for product barcodes.
What does a Wi-Fi QR code show?
The network name, the security type and the password, as stored in the code. Share that information carefully.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.