A platonic solid calculator gives the size of the five regular convex solids: the tetrahedron, cube, octahedron, dodecahedron and icosahedron. Pick the solid, enter one number, and get the volume, the surface area, three radii and the angle between faces. It replaces five separate formulas with one tool, including the common searches for an octahedron volume calculator or a dodecahedron volume calculator.
The five platonic solids
A platonic solid has identical regular faces and the same number of faces meeting at every vertex. Only five exist. [1]
| Solid | Faces | Face shape | Edges | Vertices |
|---|---|---|---|---|
| Tetrahedron | 4 | triangle | 6 | 4 |
| Cube | 6 | square | 12 | 8 |
| Octahedron | 8 | triangle | 12 | 6 |
| Dodecahedron | 12 | pentagon | 30 | 20 |
| Icosahedron | 20 | triangle | 30 | 12 |
The counts match the properties table of the encyclopedia article. [1]
Formulas behind the platonic solid calculator
For a solid with Schläfli symbol {p, q}, edge length a, F faces and dihedral angle θ, the page gives the circumradius, inradius and surface area in general form. The surface area is the area of one regular p-gon times the number of faces. [1]
Surface area A = (a ÷ 2)² × F × p × cot(π ÷ p)
Inradius r = (a ÷ 2) × cot(π ÷ p) × tan(θ ÷ 2)
Circumradius R = (a ÷ 2) × tan(π ÷ q) × tan(θ ÷ 2)
tan(θ ÷ 2) = cos(π ÷ q) ÷ sin(π ÷ h)
Here h is the Coxeter number: 4 for the tetrahedron, 6 for the cube and octahedron and 10 for the dodecahedron and icosahedron. [1] The volume is F pyramids, each with a regular p-gon base and height equal to the inradius, so V = r × A ÷ 3. [1] The calculator uses these general formulas, so every solid comes from one piece of code.
Common closed forms
| Solid | Volume | Surface area |
|---|---|---|
| Tetrahedron | a³ ÷ (6√2) | √3 a² |
| Cube | a³ | 6a² |
| Octahedron | (√2 ÷ 3) a³ | 2√3 a² |
| Dodecahedron | (15 + 7√5) a³ ÷ 4 | 3√(25 + 10√5) a² |
| Icosahedron | 5(3 + √5) a³ ÷ 12 | 5√3 a² |
These closed forms are standard results that agree with the general formulas above. We use them as checks in our own tests rather than as cited facts.
How to use the platonic solid calculator
- Choose the solid from the first list.
- Choose what you know: the edge length, the volume or the surface area.
- Enter the value and press Calculate.
- Read the volume, surface area, radii, dihedral angle and the counts of faces, edges and vertices.
If you give a volume, the calculator finds the edge from the cube root of the volume divided by the volume of the same solid with edge 1. For a surface area it uses the square root in the same way.
Worked example: octahedron volume
An octahedron has an edge of 3 cm.
| Quantity | Result |
|---|---|
| Volume | 12.7279 cm³ |
| Surface area | 31.1769 cm² |
| Inradius | 1.22474 cm |
| Midradius | 1.5 cm |
| Circumradius | 2.12132 cm |
| Dihedral angle | 109.471 degrees |
Check the volume with the closed form: (√2 ÷ 3) × 27 = 0.471405 × 27 = 12.7279. Check the surface area: 2√3 × 9 = 31.1769.
What the three radii mean
- Inradius is the radius of the largest sphere that fits inside and touches every face.
- Midradius is the radius of the sphere that touches the middle of every edge.
- Circumradius is the radius of the sphere that passes through every vertex.
Tips and common mistakes
- The edge length is the side of one face, not the height of the solid.
- Volume scales with the cube of the edge and area with its square. Doubling the edge multiplies volume by eight.
- Keep one unit throughout. The volume comes out in cubic units of the edge unit.
- A hexagonal pyramid or a prism is not a platonic solid. Try the pyramid calculator or the cube and cuboid calculator for those.
Related tools include the sphere calculator and the regular polygon area calculator, which gives the area of a single face.
Why only five solids?
At each vertex of a convex solid the face angles must add to less than 360 degrees. Equilateral triangles allow three, four or five faces per vertex, squares and pentagons allow only three. That gives exactly five combinations, and the calculator has one for each. The Schläfli symbol lists the number of sides of a face and the number of faces at each vertex, which is how the formulas in this tool are written.
Scaling and comparing solids
Because every platonic solid is fully set by one length, scaling is easy. Double the edge and every length doubles, every area is multiplied by four and every volume is multiplied by eight. To compare solids fairly, enter the same volume for each and read the edge it needs. The icosahedron holds the most volume for a given surface area of the five, since it is the closest to a sphere. The tetrahedron holds the least.
Practical notes
Dice, crystals, molecules, domes and puzzle boxes use these shapes, and a quick volume or area is often all you need. The calculator rounds to six significant digits. For packaging work, add the thickness of the material to the edge before you use the volume, since the formulas describe a solid with no wall.
Choose the surface area option when you know how much sheet material you have and want to see the largest solid it can cover. Choose the volume option when a container must hold a set amount. In both cases the calculator solves for the edge first and then lists every other measurement, so you can read off the inradius to see how big a ball fits inside.
One tool, five solids: enter the edge, the volume or the area and the platonic solid calculator does the rest.
What next
Use this often? Add Platonic Sol to your Home screen.
Frequently asked questions
What does a platonic solid calculator do?
It computes the volume, surface area, inradius, midradius, circumradius and dihedral angle of a tetrahedron, cube, octahedron, dodecahedron or icosahedron.
How do I find an octahedron volume from its edge?
Choose Octahedron, enter the edge length and read the volume. The closed form is the square root of 2 divided by 3, times the edge cubed.
Can I enter the volume instead of the edge?
Yes. Pick Volume as the known value and the calculator finds the edge, then every other measurement.
How many platonic solids are there?
Five: the tetrahedron, cube, octahedron, dodecahedron and icosahedron.
Which units does it use?
Any single length unit. Lengths come out in that unit, areas in its square and volumes in its cube.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.