This physics formula sheet puts the equations you need for a first physics course on one page. The constant-acceleration equations, Newton's second law, kinetic energy, the periods of springs and pendulums and Ohm's law are grouped by topic, and each line says what the symbols mean. Use it to check a formula while you do homework or to build a revision page you can print.
How to use the physics formula sheet
- Type in the search box to filter by any word in a name, a formula or its note.
- Choose a topic to see one group instead of the whole list.
- Read the formula in the right-hand column and its meaning on the left.
- Press Print for a clean copy of whatever is shown.
What is in each topic
The physics formula sheet is split into 5 topics. The table shows how many entries each topic holds and which ones they are, so you can jump straight to the right group with the topic box.
| Topic | Entries | What it covers |
|---|---|---|
| Motion and kinematics | 7 | average speed; acceleration; final velocity; displacement; displacement from both velocities; velocity without time; free fall |
| Forces and momentum | 7 | newton's second law; momentum; force from momentum; impulse; weight; friction; newton's law of gravitation |
| Work, energy and power | 7 | work; kinetic energy; gravitational potential energy; work-energy relation; power; power from force; efficiency |
| Oscillations and waves | 5 | frequency; wave speed; spring period; pendulum period; spring force |
| Electricity | 5 | ohm's law; charge; electrical power; resistors in series; resistors in parallel |
Motion and the SUVAT equations
Five equations describe motion with constant acceleration, written with s for displacement, u for starting velocity, v for final velocity, a for acceleration and t for time: v = u + at, s = ut + ½at², s = ½(u + v)t, v² = u² + 2as and s = vt − ½at². [1] Usually only the first four are needed. [1] Choose the equation that leaves out the one quantity you neither know nor want. If time is missing, use v² = u² + 2as; if the final velocity is missing, use s = ut + ½at².
These equations only hold while the acceleration stays the same. For a ball falling near the ground you can take a as about 9.81 m/s², but for a car that brakes harder and harder you would need calculus. The tool lists the same relations in the Motion group so you can compare them at a glance.
Forces, momentum and energy
Newton's second law is usually written F = ma, which follows from the more general statement that force is the rate of change of momentum, F = dp/dt, when mass is constant. [1] Momentum is the mass times the velocity, p = mv. [1] Impulse, the force multiplied by the time it acts, equals the change in momentum, which is why a longer stopping time means a smaller force.
The kinetic energy of a mass moving at speed v is ½mv², and the work done by the net force over a displacement equals that kinetic energy when the object starts from rest. [2] Power is work divided by time. Gravitational potential energy near the surface is mgh, with h the height gained. Remember to use SI units: kilograms, metres, seconds, newtons and joules.
Oscillations and electricity
For a mass on a spring the period is T = 2π√(m/k), and the page notes that it does not depend on the amplitude. [4] A simple pendulum has T = 2π√(L/g), which is accurate only for small swings. [4] Frequency is the reciprocal of the period, f = 1/T, and the wave speed is the frequency times the wavelength.
In a circuit, voltage equals current times resistance, V = IR, and the same law can be written I = V/R or R = V/I. [3] The electrical power equations P = VI, P = I²R and P = V²/R are standard results that follow from it; they are listed in the sheet as our own working, not taken from that page. Series resistances add, while parallel resistances add as reciprocals.
Who this page helps
Students use a formula sheet to check a relationship while they practise problems, to build a revision page and to remember what each symbol stands for. Teachers can print a topic for a class handout, and anyone returning to the subject after a break can see the standard forms at a glance.
Tips for getting the most from the physics formula sheet
- Write down every quantity the problem gives, with its unit, and mark the one you want, then pick the equation that contains exactly those letters.
- Convert to SI units before you substitute: grams to kilograms, centimetres to metres and hours to seconds.
- After you get a number, ask whether it is sensible, for instance whether a falling object really reaches that speed.
Common mistakes
Most wrong answers come from using a formula outside the conditions it was written for, from mixing units, or from reading a symbol as something else. Check what each letter stands for before you substitute numbers, keep units consistent from start to finish, and estimate the size of the answer so an obviously wrong result stands out.
Where the entries come from
Each entry was checked against the sources listed below this article. Where a formula is a standard textbook definition that the sources do not state in that form, the article says it is our own working. Notation varies between textbooks, so if your course writes a formula differently, follow your course.
What this page does not do
It is a reference, not a calculator, so it will not work out numbers for you and it does not replace a worked example from your teacher. For calculations, use the linked calculators and compare their answers with your own working.
Printing and checking
Filter by topic before you print if you only need one section, and the printed page will be shorter. The notes are short on purpose, so keep your textbook or the official documentation open for the full detail and for anything that changes between versions.
What next
Use this often? Add Physics Form to your Home screen.
Frequently asked questions
What is on this physics formula sheet?
Equations for motion, forces and momentum, work and energy, oscillations and waves, and basic electricity, each with a short explanation of the symbols.
Do the SUVAT equations always work?
No. They apply only when acceleration is constant. If the acceleration changes during the motion, these five equations give wrong results.
Which units should I use?
Use SI units: metres, kilograms, seconds, newtons, joules, watts, volts, amperes and ohms. Mixing units, such as centimetres with metres, is the most common cause of wrong answers.
Can I print this sheet?
Yes. Press the print button to get a clean copy of whatever is shown, so filter by topic first if you only want one section.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.