This MP3 compressor makes an audio file smaller by encoding it again at a lower bit rate, with optional mono, in your browser.
How the MP3 compressor shrinks a file
An MP3 is lossy and its size is set by its bit rate, the number of bits used for each second of sound. [2] MP3 allows rates from 32 to 320 kbit/s, and 128 kbit/s is a common default. [1] The MP3 compressor encodes your file again at the bit rate you choose, which gives a predictable result: file size in bytes is bit rate times duration divided by eight. Choosing mono keeps one channel and roughly halves the data needed at the same quality.
Worked example
A 10 minute podcast saved at 192 kbit/s is 14.4 MB, found as 192,000 times 600 divided by 8. Compress it at 64 kbit/s and the size is 4.8 MB, a third of the original. At 32 kbit/s in mono it drops to 2.4 MB, still clear enough for speech, but music will sound thin and watery.
Size of one minute at each rate
| Bit rate | One minute | One hour | Good for |
|---|---|---|---|
| 32 kbit/s | 0.24 MB | 14.4 MB | Speech only |
| 48 kbit/s | 0.36 MB | 21.6 MB | Talk radio |
| 64 kbit/s | 0.48 MB | 28.8 MB | Podcasts |
| 96 kbit/s | 0.72 MB | 43.2 MB | Podcasts with music |
| 128 kbit/s | 0.96 MB | 57.6 MB | Casual music |
| 160 kbit/s | 1.2 MB | 72 MB | Better music |
The tool drops any video from the file, using FFmpeg's option that disables video, [3] so you can also pull a smaller MP3 out of a video file.
MP3 compressor tips
- Start from the best source. Compressing an MP3 again loses more quality than compressing the original WAV.
- Use mono for voice recordings, interviews and lectures, and stereo for music.
- Check a short test first. If speech sounds muffled go one step higher.
- For a different format use the audio converter.
Privacy, limits and the FFmpeg core
This page runs FFmpeg as ffmpeg.wasm, a WebAssembly build that works inside your browser tab. [4] The first time you press the button the page downloads the converter, about 10 MB, and keeps it for the rest of the visit. Your audio is read from your own disk into the browser, processed there and handed back as a download. It is never uploaded, so it works for private recordings and you can use it offline once the converter has loaded.
Files up to 500 MB are accepted. Long or high resolution files take noticeably longer than they would in a desktop program, because a browser build of FFmpeg runs on a single thread and has less memory to work with. Keep the tab open until the progress figure reaches 100%, and press Stop if you change your mind. The FFmpeg core in this build is licensed under GPL-2.0-or-later, which is why the licence note sits under the button.
Step by step with the mp3 compressor
- Press the upload box and choose your audio file.
- Open the Bit rate list and choose a value such as 64 kbit/s.
- Choose Stereo or Mono.
- Press Compress audio and wait for the progress to reach 100%.
- Download the MP3 and compare the size and sound.
Who uses the mp3 compressor
People shrink podcasts and lectures to save phone storage, send voice notes under an attachment limit, or prepare light files for a website. Audiobook listeners also cut file sizes for long books.
Common mistakes to avoid
- Going to 32 kbit/s for music and expecting it to sound full.
- Compressing an already low bit rate MP3.
- Using mono on music with wide stereo.
- Not listening to a short test before compressing a long file.
Quality, formats and browser notes
Audio is encoded by the encoders built into FFmpeg: LAME for MP3, the native AAC encoder, libvorbis for OGG and libopus for Opus. Output settings are fixed to common values so you do not need to know codec jargon, and the result plays on any phone, computer or car stereo that supports the format. Chrome, Edge, Firefox and Safari on a computer all run the tool. On a phone a very long recording can be slow or fail if the browser runs short of memory, so split it into smaller parts or use a computer.
Lossy compression: what is thrown away
MP3 relies on psychoacoustics, the study of what we actually hear. The encoder removes detail that is masked by louder sounds nearby or lies at the edge of hearing. At high bit rates little audible is lost. At low bit rates the encoder has to discard more, and the result sounds dull or has a swirling noise. Speech is much more forgiving than music, which is why 64 kbit/s is fine for a podcast.
If something goes wrong
If the page says the converter could not be loaded, check your internet connection, because the 10 MB core is fetched the first time you use it, and reload the page. If the job fails on a particular file, it may be damaged or encoded in a way this browser build of FFmpeg does not support; try playing it in a media player first. Very long recordings need a lot of browser memory, so cut them into parts if the page stops. Pressing Stop ends the job at once and frees the memory, and you can start again with other settings.
What next
Use this often? Add MP3 Compress to your Home screen.
Frequently asked questions
How do I compress an MP3?
Choose the file, pick a lower bit rate, for example 64 kbit/s, and press Compress audio.
What bit rate should I choose?
Use 32 to 64 kbit/s for speech, 96 to 128 for casual music and 160 when quality matters more than size.
Does the MP3 compressor lose quality?
Yes. Lower bit rates remove detail. The size is lower but the sound is less rich.
What does mono do?
Mono mixes both channels into one, which roughly halves the size for the same bit rate settings and suits speech.
Is my audio uploaded?
No. It is processed in your browser.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.