A molecular SO2 calculator works out how much of the free sulfur dioxide in a wine is in its molecular form, the form that protects the wine, from the free SO2 and the pH. Enter the free SO2 you measured and the pH, and you get the molecular SO2 in milligrams per litre, the share of the free SO2 that is molecular, and, if you give a target, the free SO2 you would need. It runs in your browser and nothing you enter is sent anywhere.
Free SO2 and molecular SO2
When sulfur dioxide dissolves in wine, it exists in more than one form. The molecular form is dissolved SO2 gas, and the rest of the free SO2 is mostly the bisulfite ion. Which form dominates depends on the pH. At low pH more of the free SO2 is molecular, and at high pH less is. That is why a wine at pH 3.0 needs less free SO2 than a wine at pH 3.8 to have the same molecular SO2, and why winemakers look at pH as well as the free SO2 reading from a test kit.
The pKa of sulfur dioxide
Wikipedia's article on sulfur dioxide gives its acidity as a pKa of about 1.81. The pKa is the pH at which the molecular and bisulfite forms are present in equal amounts. Wine has a pH well above that point, so the molecular form is only a small share of the free SO2 at wine pH, usually a few percent.
How to use the molecular SO2 calculator
- Enter your free SO2 in ppm, which is milligrams per litre.
- Enter the pH of the wine.
- Leave the pKa blank to use 1.81, or enter another value.
- If you want to know the free SO2 needed for a target, enter the molecular SO2 you want.
- Press Calculate molecular SO2.
The formula
The Henderson–Hasselbalch equation, as Wikipedia states it, is pH = pKa + log10 of the ratio of the base form to the acid form. Rearranging, the ratio of bisulfite to molecular SO2 is 10 to the power of the pH minus the pKa. The share that is molecular is therefore 1 divided by 1 plus 10 to the power of (pH − pKa). Multiply that by the free SO2 to get the molecular SO2. The Wikipedia page does not give this share directly: it is my own derivation from the ratio on the page.
Worked example
A wine has a pH of 3.5 and 30 ppm of free SO2. The pH minus the pKa is 3.5 − 1.81, which is 1.69. Ten to the power 1.69 is about 49, so the share that is molecular is 1 divided by 50, which is 2.0 percent. The molecular SO2 is 30 times 0.02, which is 0.60 mg/L. If you wanted 0.5 mg/L of molecular SO2 at that pH, you would need 0.5 divided by 0.02, which is 25 ppm of free SO2.
How the pH changes the answer
This table, worked out with the calculator, shows the molecular share with pKa 1.81. At pH 3.0 it is about 6.1 percent. At pH 3.3 it is about 3.1 percent, at 3.5 about 2.0 percent, at 3.8 about 1.0 percent and at 4.0 about 0.64 percent. So the same 30 ppm of free SO2 gives 1.8 mg/L of molecular SO2 at pH 3.0 and only 0.19 mg/L at pH 4.0, which is why a high-pH wine is harder to protect.
Choosing a target
The target you use depends on the wine and your own aims, and sources differ, so this calculator does not suggest one. The 0.5 mg/L in the example is only an example. Look up the guidance from your winemaking supplier or a winemaking course, and use the calculator to turn it into the free SO2 you need at your wine's pH.
Why the answer is an estimate
The pKa of 1.81 is for dilute water at 25 °C. In wine, the temperature, the alcohol and the other compounds change the balance, so the true molecular SO2 can be different. Cold wine, for instance, holds the SO2 differently from wine at room temperature. Treat the result as a guide for comparing wines and pH levels, and rely on your supplier's tables or a laboratory for exact work.
Adding sulfur
Once you know how much free SO2 you need, use the sulfur calculator on this site to turn the increase in ppm into grams of potassium metabisulfite for your volume. Test again after the addition, because some of the SO2 you add binds to other compounds and does not stay free.
Measuring the pH and the free SO2
Use a pH meter that you have calibrated with buffer solutions, since a small error in the pH changes the result. Measure the free SO2 with a test kit for winemaking, and take the sample at the same time. Take both readings after the wine has settled and, for a fair comparison between wines, at a similar temperature.
Lowering the pH
If your wine has a high pH, you have two ways to raise the molecular SO2: add more SO2, or lower the pH, for example by adding acid. The calculator shows the effect of both. At pH 3.8 you need about 49 ppm of free SO2 for 0.5 mg/L of molecular SO2, against 25 ppm at pH 3.5. Never change the acidity without a reason, and test the wine after each change.
Common mistakes
- Using total SO2. The calculation needs the free SO2.
- Forgetting the pH. The same free SO2 protects a low-pH wine much better.
- Treating the molecular figure as exact. It is an estimate.
- Mixing up ppm and percent. One ppm is one milligram per litre.
What next
Use this often? Add Molecular So to your Home screen.
Frequently asked questions
What is a molecular SO2 calculator?
A tool that works out how much of the free sulfur dioxide in wine is in the molecular form, from the free SO2 and the pH.
How do you calculate molecular SO2?
Multiply the free SO2 by 1 divided by (1 + 10 to the power of pH minus pKa), with a pKa of about 1.81.
What is the molecular SO2 at pH 3.5 and 30 ppm free SO2?
About 0.60 mg/L, since about 2.0 percent of the free SO2 is molecular at that pH.
Why does pH matter for SO2?
At lower pH a bigger share of the free SO2 is molecular, so a lower-pH wine needs less free SO2 for the same protection.
How accurate is the molecular SO2 calculator?
It is an estimate for dilute water at 25 °C. Temperature and alcohol shift the balance in real wine.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.