Saved

Press the star next to a tool's name to save it.

All my tools

Moisture Content Calculator

Use this moisture content calculator to find the water weight and the moisture content, on a wet basis and a dry basis, from the wet weight and the dry weight of a sample.

Restored your last values ·

Weigh the sample as it is (wet weight), dry it until its weight stops falling (dry weight), and enter both. You get the water weight and the moisture content on a wet basis and on a dry basis. You can also find a missing weight from the other weight and the moisture content.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose what to find and fill in the boxes that are shown, then press Calculate.

See full result

This moisture content calculator turns the wet weight and the dry weight of a sample into the share of water it holds. It gives the water weight, the moisture content on a wet basis and the moisture content on a dry basis, and it can also find a missing weight from a known moisture content.

How to use the moisture content calculator

  1. Choose what to find.
  2. Enter the wet weight and the dry weight, or one weight and the moisture content.
  3. Press Calculate.

What moisture content means

The moisture content of a material is the amount of water it holds compared with its weight. It counts all the water in a sample, which drying removes [1]. It is used for soil, wood, grain, food and many building materials, because the water changes how heavy, strong or perishable the material is. The calculator takes two weights, the wet weight before drying and the dry weight after drying, and works out the rest from them.

The wet-basis formula

On a wet basis, the water weight is divided by the wet weight. The formula is moisture content = (wet weight − dry weight) ÷ wet weight × 100. The water weight is simply the wet weight minus the dry weight. Wikipedia describes the wet-basis value as the mass of water per unit mass of the moist specimen before drying [1]. A wet-basis value can never be above 100 percent, because the water is only part of the whole sample.

The dry-basis formula

On a dry basis, the same water weight is divided by the dry weight instead. Wikipedia gives this as the mass of water compared with the mass of the dry material, and says that it is needed in woodworking, geotechnics and soil science [1]. A dry-basis value can be above 100 percent, as in a freshly cut log that holds more water than wood.

A worked example

Take a wet weight of 32 kilograms and a dry weight of 19 kilograms. The water weight is 32 − 19 = 13 kilograms, and the moisture content on a wet basis is 13 ÷ 32 × 100 = 40.625 percent. On a dry basis, 13 ÷ 19 × 100 = 68.4211 percent. Enter 32 and 19 to see all three figures. A second example: 2.5 kilograms wet and 1.3 kilograms dry gives 48 percent.

Converting between the two bases

The two bases describe the same water in a different way. Since the wet weight is the dry weight plus the water, the wet-basis fraction is the dry-basis fraction divided by one plus the dry-basis fraction, and the dry-basis fraction is the wet-basis fraction divided by one minus the wet-basis fraction. This conversion is our own working from the two definitions, and Wikipedia does not state it. For 40 percent wet basis, the dry basis is 40 ÷ 60 × 100 = 66.67 percent. The calculator shows both.

Finding a missing weight

Sometimes you know the moisture content and one weight. If you know the wet weight and the moisture content on a wet basis, the dry weight is the wet weight × (1 − moisture ÷ 100). A wet weight of 100 and a moisture content of 40 percent give a dry weight of 60. If you know the dry weight, the wet weight is the dry weight ÷ (1 − moisture ÷ 100). These are rearrangements of the wet-basis formula, which is why we call them our own working.

Soil, wood and food

The same arithmetic is used in many fields. Some examples: 110 kilograms of potatoes that dry to 96 kilograms is 12.727 percent. For soil, a wet weight of 65 and a dry weight of 39 give 40 percent. For apples, 7 kilograms that dry to 2 kilograms give 71.43 percent. Wood and soil work is often reported on a dry basis, while food science uses both forms [1], so check which one your field uses.

Drying the sample

The result is only as good as the dry weight. Wikipedia describes the oven-dry method, in which a sample of soil, wood or similar material is dried in an oven or kiln. For wood, the usual convention is 105 °C for 24 hours or until the weight stops falling [1]. For other materials, follow the standard that you work to. Drying at too high a temperature can burn off other substances than water and make the moisture content look too high.

Units

The calculation compares two weights, so any weight unit works as long as both weights use the same one. You can use grams, kilograms, ounces or pounds. The moisture content is always a percentage. The water weight is given in the unit that you entered. There is no US or metric choice, since the units cancel out in the ratio and the percentage is the same either way.

Using the calculator

Pick what you want to find, enter the values and press the button. Check that the dry weight is not more than the wet weight, since that would mean the sample gained weight on drying. Try the same numbers on both bases to see how far apart they can be for a wet sample. Round the result to the precision of your scale, which is usually much coarser than the six figures that the calculator shows.

Common mistakes

  • Mixing the two bases. A wet-basis value and a dry-basis value for the same sample can be very different.
  • Using different weight units. Both weights must use the same unit.
  • Entering the dry weight as the wet weight. The wet weight is the larger number.
  • Not drying the sample fully. A damp dry weight gives a value that is too low.

What next

Use this often? Add Moisture Con to your Home screen.

Frequently asked questions

What is a moisture content calculator?

A tool that finds the share of water in a sample from its wet weight and its dry weight.

What is the moisture content formula?

On a wet basis it is (wet weight − dry weight) ÷ wet weight × 100.

What is the difference between wet basis and dry basis?

A wet basis divides the water by the wet weight, a dry basis divides it by the dry weight.

Can the moisture content be above 100 percent?

Yes on a dry basis, never on a wet basis.

How do I get the dry weight?

Dry the sample by the method for your material until its weight stops falling, then weigh it.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters