A dry matter calculator shows how much of a feed, food or sample is solid matter once the water is excluded. Enter the moisture percentage and the weight of the feed and you get the dry matter percentage, the dry matter weight and the weight of water. It also converts a nutrient between the as-is and dry matter bases.
How to use the dry matter calculator
- Choose what to work out and say whether your moisture is on a wet basis or a dry basis.
- Enter the moisture percentage and, if you like, the weight of the feed.
- Press Calculate.
What dry matter is
The Wikipedia article on dry matter defines dry matter, or dry weight, as a measure of the mass of a completely dried substance, and says that the dry matter of plant and animal material consists of all its constituents excluding water.[1] For feed, dry matter intake refers to feed intake excluding its water content.[1] The article on water content describes moisture content as the quantity of water contained in a material, often expressed as a percentage.[2]
Wet basis and dry basis
The water content page gives gravimetric moisture in more than one form. One is the mass of water per unit mass of the moist specimen before drying, which food science calls moisture content wet basis. Another is the mass of water per unit mass of dry matter, called moisture content dry basis.[2] The page says that both are used in food science.[2] That is why the calculator asks which basis you have. On a wet basis the dry matter share is 100 minus the moisture percentage. On a dry basis it is 1 ÷ (1 + moisture ÷ 100). The page does not write these two conversions, so they are our own working from the two definitions.
The apple example
The dry matter page gives an example: a 138 gram apple contains 84 percent water, which is 116 grams of water and 22 grams of dry matter.[1] Enter 84 percent and 138 grams and the calculator gives a dry matter share of 16 percent, 22.08 grams of dry matter and 115.92 grams of water. The small difference from the page's 22 grams is rounding. The page also notes that the dried apple is only 32 percent water, or 68 percent dry matter, so 138 grams of dried apple has 93.8 grams of dry matter.[1]
Converting a nutrient between bases
The page says that nutrient levels are often expressed on a dry matter basis, as a proportion of the total dry matter, and that this makes feeds easier to compare than the as-is basis.[1] Its example is potassium at 0.72 percent on a dry matter basis, so the apple contains 0.72 ÷ 100 × 22 grams = 158 milligrams.[1] Enter 0.72 percent on the dry matter, 84 percent moisture and 138 grams, and the calculator gives 0.1152 percent as it is, and 0.158976 grams, about 159 milligrams, because it uses 22.08 grams of dry matter. In the other direction, divide the as-is percentage by the dry matter share. The page does not state the reverse formula, so that step is our own working.
How much feed to supply an amount of dry matter
To find the weight of feed that supplies a target amount of dry matter, divide the target by the dry matter share. For a feed at 65 percent moisture, the dry matter share is 35 percent, so 350 units of dry matter need 1,000 units of feed as it is. This is our own application of the definitions. The page stresses that the moisture content of each constituent has to be considered when working out the total quantities of nutrients supplied.[1]
How dry matter is measured
The water content page describes the oven-dry method: the sample is weighed before and after drying in an oven or kiln, and the sample weight is checked at regular intervals.[2] Other methods it lists include Karl Fischer titration, mass loss on heating and freeze drying.[2] The dry matter page says that for feed, the moisture percentage is frequently determined by heating the feed on a paper plate in a microwave oven or by using a Koster tester.[1] The pages give no oven temperature or time for feed, so follow the method of your laboratory.
Losses and limits
The dry matter page warns that heat generated by microbial respiration in stored feed causes dry matter loss, which reduces the content of carbohydrate, protein and energy.[1] The water content page also notes that the method used may affect whether water in a bound form is counted.[2] A dry matter value is therefore only as accurate as the sample and the drying method behind it.
Comparing two feeds
Suppose one forage has 70 percent moisture and 2.4 percent of a nutrient as it is, and another has 12 percent moisture and 8.8 percent as it is. On a dry matter basis the first has 2.4 ÷ 0.30 = 8 percent and the second 8.8 ÷ 0.88 = 10 percent. The wetter feed looked much weaker as it is, but on a dry matter basis the gap is small. These numbers are our own example, and they show why the page recommends comparing feeds on a dry matter basis.{1}
Common mistakes
- Mixing up the bases. A 65 percent wet-basis moisture is not the same as 65 percent on a dry basis.
- Comparing feeds as fed. Compare nutrients on a dry matter basis.
- Using moisture of 100 percent. A material with no solids has no dry matter.
What next
Use this often? Add Dry Matter to your Home screen.
Frequently asked questions
What is a dry matter calculator?
A tool that finds the share of solid matter in a feed from its moisture percentage, and converts nutrients between the as-is and dry matter bases.
How do I calculate dry matter from moisture?
On a wet basis, dry matter percent = 100 minus moisture percent. A feed with 65 percent moisture is 35 percent dry matter.
What is a dry matter basis?
Expressing a nutrient as a proportion of the dry matter, so that feeds with different water contents can be compared.
How do I convert as-fed to dry matter?
Divide the as-is nutrient percentage by the dry matter share. A nutrient at 0.1152 percent in an 84 percent moisture feed is 0.72 percent on a dry matter basis.
What is the difference between wet basis and dry basis?
Wet basis moisture is water as a share of the whole feed. Dry basis moisture is water as a share of the dry matter.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.