Saved

Press the star next to a tool's name to save it.

All my tools

Log Weight Calculator

Use this log weight calculator to estimate the weight of a freshly cut log from its species, diameters and length, using Huber's volume formula and green wood densities.

Restored your last values ·

Pick a species, or choose Other and type a density. Enter the diameter at the small end and, if the log tapers, the diameter at the large end. If you measured one diameter in the middle, enter only that. Add the length and the number of logs.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose the species, enter the diameter and the length, then press Calculate.

See full result

A log weight calculator estimates how much a freshly cut log weighs from its species, its end diameters and its length. It finds the volume of the log with Huber's formula and multiplies it by the green density of the wood, with the species list taken from Penn State Extension's table.

How to use the log weight calculator

  1. Choose US or metric units.
  2. Pick the species, or choose Other and type a density.
  3. Enter the diameters at the ends and the length.
  4. Add the number of logs and press Calculate.

The formula

The weight of a log is its green density times its volume. The volume comes from Huber's formula, which multiplies the length of the log by the area of its cross section at the middle [1]. The tool finds the middle diameter by averaging the diameters of the two ends, which is our own working. With the mid diameter d and the length L, the volume is L × π × d² ÷ 4, and the tool multiplies it by the density to get pounds, and by 0.45359237 to get kilograms.

Where the densities come from

The species list is Table 1 of a Penn State Extension article by Charles David Ray, which gives average green weights in pounds per cubic foot for 63 species. Examples are white oak at 64, northern red oak at 61, sugar maple at 59, black walnut at 58, loblolly pine at 50, ponderosa pine at 46, eastern white pine at 55 and coastal Douglas-fir at 49 [2]. The article derives the green weight from the basic specific gravity and the green moisture content, using the table of the 2010 Wood Handbook [2].

A worked example

Take a log of English oak with a mean diameter of 17.5 inches, 3.3 feet long, at a density of 52 pounds per cubic foot. The mean diameter is 1.4583 feet, the volume is 5.512 cubic feet, and the weight is 286.6 pounds, or about 130 kilograms. Three such logs weigh 860 pounds. English oak is not in the Penn State list, so enter it with Other and a density of 52, and use end diameters of 15 and 20 inches to get the same mean.

Another example

A ponderosa pine log with end diameters of 12 and 18 inches and a length of 8 feet has a mid diameter of 15 inches, which is 1.25 feet. The volume is 8 × π × 1.25² ÷ 4 = 9.8175 cubic feet. At 46 pounds per cubic foot, the weight is 451.6 pounds, or 204.8 kilograms. The same English oak log as above, in white oak at 64 pounds, would weigh 352.77 pounds.

Why the species table matters

Densities differ a lot between species. White oak is 64 pounds per cubic foot and western hemlock 60, while ponderosa pine is 46 and coastal Douglas-fir 49 [2]. A difference of ten pounds per cubic foot changes the weight of a large log by hundreds of pounds, so pick the species with care, and use the Other option when yours is not listed, for example the English oak above.

A cross-check

Purdue's extension note FNR-109 uses data from the 1974 Wood Handbook and gives green weights of 64.0 pounds per cubic foot for white oak, 59.0 for red oak, 59.0 for sugar maple and 57.9 for black walnut, from a half-heartwood, half-sapwood sample [3]. These values are close to those of the Penn State table, which has 61 for northern red oak and 58 for black walnut. The small gaps show how much the density of a species varies, and why the tables give averages.

Entering your own density

Choose Other and type the density. In US mode it is in pounds per cubic foot. In metric mode it is in kilograms per cubic metre, and the tool divides by 16.018 to get pounds per cubic foot, since one pound per cubic foot is about 16.018 kilograms per cubic metre, which is a standard conversion and our own addition. For instance, 52 pounds per cubic foot is 833 kilograms per cubic metre.

Diameters, units and bark

In metric mode the diameters are in centimetres and the length in metres. If your log has the same diameter from end to end, or if you measured the middle directly, enter that one diameter and leave the large end blank. The tool does not treat bark in any special way, so measure the diameter the way you want it, with or without bark, and say so when you compare numbers.

Several logs

The number of logs multiplies the weight, and it must be a whole number. The result shows the weight of one log and the total. This is handy for a load of firewood rounds or fence posts that are all cut to the same size. For logs of different sizes, calculate each size separately and add up the totals. The volume line shows cubic feet and cubic metres for one log.

What the result means and its limits

The answer is the green weight, that is the weight of a freshly cut log. A log that has dried is lighter. The tables give average densities, and a real log depends on its moisture, the tree and the mix of heartwood and sapwood, so expect a difference of several percent. Huber's formula treats the mid-point area as representative of the whole log, so a log that bulges or tapers sharply is only approximated. The result is not a safe working load for a truck, a trailer or a crane.

Common mistakes

  • Using the wrong species. Densities differ a lot, so choose the nearest species or type your own.
  • Mixing units. Check that the diameters and the length use the same system as the Units choice.
  • Entering the radius. The boxes take diameters.
  • Treating the result as a dry weight. It is the weight of fresh wood.

What next

Use this often? Add Log Weight to your Home screen.

Frequently asked questions

What is a log weight calculator?

A tool that estimates the weight of a log from its species, diameters and length, using the volume and the green density of the wood.

How do I find the weight of a log?

Multiply its green density by its volume. The volume is the length times the area of the cross section at the middle.

What is Huber's formula?

It gives the volume of a log as its length times the cross-sectional area at the midpoint.

How much does a white oak log weigh?

White oak averages 64 pounds per cubic foot green. A log of 17.5 inches mean diameter and 3.3 feet long, at 5.512 cubic feet, weighs about 353 pounds.

Is the result a dry or a green weight?

It is a green weight, for a freshly cut log. A dried log weighs less.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters