A how many tables calculator tells you how many people can sit at a table, and how many tables you need for your guests. Choose a round or a rectangular table, enter its size, and give the number of guests, and the calculator gives the seats at one table and the tables needed. It can also work the other way, to find the size of the table for a number of seats. It uses a space-per-person rule that you can compare with furniture and rental guides. It runs in your browser and nothing you enter is sent anywhere.
How to use the how many tables calculator
- Choose US or Metric units and what you want to find.
- Choose the shape of the table.
- Enter the length of a rectangular table or the radius of a round one, and the number of guests.
- Press Work it out.
Seats at a rectangular table
For a rectangular table, the calculator divides the length of the table by 60 centimetres, about 24 inches, the space it allows for each person, and doubles the result because people sit on both sides. This matches the basis of 24 inches per person used by Amish Tables, which also adds two seats for the ends,[1] and sits within the 24 to 30 inches per guest that Party Rental Ltd recommends for comfort.[2] The seats at the head of the table are shown separately, with at most one person at each end. The calculator counts whole seats only: it rounds the number per side down. A table 240 centimetres long seats 4 on each side, which is 8 people, and with one person at each end it seats 10.
Seats at a round table
For a round table, the number of seats is the circumference divided by 70 centimetres of space per person, about 27.6 inches, which is a little more generous than the 24 inches in the Amish Tables formula, which multiplies the table size by 3.14 and divides by 24.[1] Party Rental Ltd lists a 60-inch round as seating 8 to 10.[2] The circumference is 2 times pi times the radius. A round table with a radius of 150 centimetres has a circumference of about 942 centimetres, which gives 13.46, so 13 people. The result rounds down in this example, since a fraction of a person cannot sit at the table.
How many tables you need
The number of tables is the number of guests divided by the seats at one table, rounded up. In a wedding example, 200 guests at tables of 13 need 15.38 tables, so you need 16. The last table will not be full, and you may want to spread the guests more evenly over the tables, or to add a smaller table for the extra people.
Finding the size of the table
The calculator also works backwards. For a rectangular table, the length is the number of seats on the sides divided by 2, times 60 centimetres. For example, 8 seats need a table 240 centimetres long, or 180 centimetres if 2 of the 8 sit at the ends. For a round table, the radius is the number of seats times 70 centimetres, divided by 2 pi. For 8 seats, that is about 89 centimetres, which is about 90.
Space and width
The space per person is an assumption for comfort, and Party Rental Ltd advises 24 to 30 inches per guest.[2] A tighter space seats more people but is less comfortable. Our own working is that a table should be at least 80 centimetres wide, so that people have room for plates and the food in the middle. The calculator uses the width only as a note and does not change the result.
Reading the result
The calculator shows the seats at one table and, if you gave the number of guests, the number of tables you need. In the other mode, it gives the length of a rectangular table or the radius and diameter of a round one for the seats you want. Use the seats figure to compare table shapes: a round table is good for conversation, while a long rectangular table seats more people in a narrow room.
Mixing table shapes
You can also mix shapes. Work out one shape at a time, and add the seats. For example, if you have two long tables and a few round ones, run the calculator for each and add up the seats before you compare the total with your guests. The calculator treats every table as a separate case and does not combine them for you.
Space in the room
The seats at the table are only part of the plan. You also need room for people to walk between tables, for chairs to be pulled out, and for servers to pass. A common approach is to draw the room to scale on paper, cut out the tables at the same scale and move them around. Leave a clear route to the exits and the toilets, and keep the number of people at each table the same where you can, so that nobody is crowded.
Planning a seating chart
When you know the number of tables, you can divide the guest list between them. Keep families and groups of friends together, and try to put the same number of people at each table. If the number of guests does not divide evenly, put the extra people at tables that have a seat or two to spare, rather than leaving one table nearly empty. Mark the table numbers on a plan, and give each guest a card with a table number to help them find their place.
Common mistakes
- Entering the diameter as the radius. The radius is half the width of a round table.
- Not rounding down. You can only seat whole people.
- Ignoring the room. You also need space to walk between tables.
- Counting people at the ends twice. Choose how many sit at the ends separately.
What next
Use this often? Add How Many Tab to your Home screen.
Frequently asked questions
What is a how many tables calculator?
A tool that works out how many people sit at a table, and how many tables your guests need.
How many people sit at a round table?
The circumference divided by 70 cm per person. A radius of 150 cm seats 13.
How many people sit at a rectangular table?
The length divided by 60 cm, doubled for both sides, plus up to one person at each end.
How many tables for 200 guests at tables of 13?
16 tables, since 200 divided by 13 is 15.38, rounded up.
What size table for 8 people?
A rectangular table 240 cm long, or a round table about 90 cm in radius.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.