Saved

Press the star next to a tool's name to save it.

All my tools

Balloon Arch Calculator

Use this balloon arch calculator to estimate the arch length, the number of balloons for a single row or garland, and an indicative cost, in US or metric units.

Restored your last values ·

Enter the height and width of the arch, choose a single row or a garland, and give the balloon diameter. The calculator works out the length of the arch, the number of balloons and an indicative cost.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the arch height, width and balloon diameter, then press Count the balloons.

See full result

A balloon arch calculator estimates how many balloons you need to make an arch for a party, a wedding or a shop opening. Enter the height and width of the arch, choose a single row or a garland, and give the size of the balloons. The calculator works out the length of the arch, the number of balloons and what they might cost. It runs in your browser and nothing you enter is sent anywhere.

How to use the balloon arch calculator

  1. Choose US or Metric units.
  2. Pick the type of arch: a garland or a single row. For a garland, choose how many balloons sit in each turn.
  3. Enter the height, the width and the balloon diameter.
  4. Choose the balloon type and press Count the balloons.

Step one: the length of the arch

The calculator first finds the length of the curve from the height h and the width w. When the arch is wider than it is tall, the length is the height plus the width. When the two are about equal, it is one and a half times the height plus the width. When the arch is taller than it is wide, it is twice the height plus the width. These length rules are our own working, and the calculator treats the two as equal when they differ by no more than five percent. The length is in feet for US units and in metres for metric units.

Step two: the number of balloons

For a single row, the calculator gives the number of balloons as the arch length divided by the balloon diameter, multiplied by 0.87, and rounded to the nearest whole balloon. The 0.87 factor is a rough allowance of our own, not a published constant. For a garland, where balloons are tied in clusters, the length divided by the diameter is multiplied by 4.8 when each turn has four balloons, which is a published method for clusters of four,[1] and by 6.3 when each turn has five, which is our own extension. The length and the diameter must be in the same unit, so the calculator changes inches into feet, or centimetres into metres, before it divides.

Worked examples

A worked example is a garland with a height of 10 feet and a width of 6 feet, five balloons in each turn and balloons 11 inches across. The arch is taller than it is wide, so its length is twice 10 plus 6, which is 26 feet. The balloon count is 6.3 times 26 divided by 11 twelfths of a foot, or 178.7, which rounds to 179 balloons. For a garland 10 feet high and 7 feet wide, with four balloons in a turn and 11-inch balloons, the length is 27 feet and the count is 141. For a single row, 39.37 inches divided by 11 and multiplied by 0.87 is 3.11, so about 3 balloons per metre of arch.

Prices

The calculator offers three balloon types with indicative prices of our own choosing: 10 cents for a normal balloon, 30 cents for a metalized one and 70 cents for a personalized one. These are not published prices, and they usually go down when you buy bigger batches. The calculator multiplies the number of balloons by the price of the type you choose, which gives the 179 balloons of the first example a cost of $17.90 with normal balloons. Check the real price in your shop and add the cost of a pump, tape and a frame.

Air or helium

Helium is a non-renewable resource that is limited in supply, and it is becoming more common to fill balloons with air instead.[3] An arch filled with air needs a sturdy frame, such as metal wire, to hold its shape, while helium balloons need no support but float away. Both points are our own working. Buy a pump, since you may end up inflating almost 200 balloons by hand. Organic arches fill gaps with smaller balloons: one guide adds about 2 to 7 small 5-inch balloons per foot as extras.[2]

Think about the environment

Released balloons can land anywhere, including nature reserves, and animals can confuse deflated balloons with food or nesting material. Many states in the USA have banned balloon releases.[3] Paper flowers or garlands are an alternative. If you use balloons, collect them after the event and do not release them outdoors.

Reading the result

The calculator shows the length of the arch, the number of balloons and the cost. The length is a useful check: if it is not close to what you expect for the shape you have in mind, check that you entered the height and the width the right way round. The balloon count is rounded to the nearest whole balloon, so the true figure may be a little higher or lower. Buy a few more than the result, because balloons burst while you inflate and tie them.

Choosing the balloon size

A larger balloon needs fewer pieces to cover the same length, so the count falls as the diameter grows. Try 11 inches and then 5 inches to see the difference. One guide lists about 12 balloons per foot for 5-inch, 8 for 9-inch, 6 for 11-inch and 4 for 14-inch balloons in clustered arches.[1] In practice, a garland often mixes sizes, with large balloons forming the main body and small ones filling the gaps.[2] You can use the calculator for the large balloons and add a few dozen small ones on top.

Planning the build

Make the frame first, or choose a way to hang the arch, then inflate the balloons in batches by size. Tie them in groups of four or five for a garland, and attach the groups to the frame one after another. For a single row, tie each balloon to the frame next to the last one.

Common mistakes

  • Mixing units. Give the diameter in inches for US units and in centimetres for metric.
  • Using the arch width as its length. The length of the curve is longer than the width.
  • Buying the exact number. Some balloons burst, so buy a few extra.
  • Forgetting the frame. Air-filled arches need support.

What next

Use this often? Add Balloon Arch to your Home screen.

Frequently asked questions

What is a balloon arch calculator?

A tool that estimates how many balloons an arch or garland needs from its height, width and balloon size.

How do you calculate the balloons for a single-row arch?

Divide the arch length by the balloon diameter and multiply by 0.87, rounded to the nearest whole balloon.

How many balloons for a garland?

Multiply the length divided by the diameter by 4.8 with four balloons a turn, or by 6.3 with five.

How many balloons for a garland 10 feet high and 6 feet wide?

With 11-inch balloons and five in a turn, the calculator gives 179 balloons for a garland 10 feet high and 6 feet wide.

Should I use air or helium?

Air is a common choice, with a sturdy frame, because helium supply is limited and helium balloons float away.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Fun & Lifestyle Tools