Saved

Press the star next to a tool's name to save it.

All my tools

Heat Transfer Calculator

Use this heat transfer calculator to find the heat flow by conduction, convection or radiation, the heat needed to warm a mass, or the heat transfer coefficient.

Restored your last values ·

kg
J/(kg·K)
°C
°C
W/(m·K)
m
K
W/(m²·K)
W
m²
s
°C
°C

Pick convection, conduction, radiation, heating a mass, or the heat transfer coefficient. The boxes change with your choice. Temperatures are in degrees Celsius, areas in square metres and lengths in metres.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose the kind of heat transfer, fill in the boxes that appear, then press Calculate.

See full result

A heat transfer calculator covers the three ways heat moves: conduction through a solid, convection between a surface and a fluid, and radiation between a hot object and its surroundings. It also finds the heat needed to warm a mass, and the heat transfer coefficient from a measured heat flow.

How to use the heat transfer calculator

  1. Choose the kind of heat transfer.
  2. Fill in the boxes that appear, using SI units: metres, square metres, watts and degrees Celsius.
  3. Press Calculate to see the heat flow or the coefficient.

Three ways heat moves

Heat moves by conduction, convection and radiation. Conduction moves energy between objects in physical contact, convection moves heat by the movement of fluids, and radiation occurs across a vacuum or any transparent medium [1]. The calculator matches the formula to the type that you select. The calculator offers each of them, and a fourth mode for the plain heat needed to change the temperature of a mass.

Conduction

For one dimension, Fourier's law gives the heat flow as Q̇ = κ A ΔT ÷ ℓ, with the conductivity κ in W/(m·K), the area A, the temperature difference ΔT and the distance ℓ [2]. The thermal resistance is R = ℓ ÷ (κ A) [2]. In the example, k = 0.8, A = 1 m², l = 0.1 m and ΔT = 20 K give 160 W. If you add a time of 3,600 s, the energy is 576,000 J. That example is our own.

Convection

For convection the heat flow is Q = h A ΔT, where h is the heat transfer coefficient in W/(m²·K) [4]. Take h = 2,000 W/(m²·K), A = 1 m², a surface at 50 °C and a fluid at 20 °C. Then ΔT = 30 K and the heat flow is 60,000 W, or 60 kW. The SI unit of h is watts per square metre kelvin [5]. A positive result means heat flows from the surface to the fluid. This is the sign rule of our tool.

Radiation

The power radiated by a surface is P = A ε σ T⁴, with the emissivity ε and the Stefan–Boltzmann constant σ = 5.670374419 × 10⁻⁸ W/(m²·K⁴) [3]. For exchange with surroundings, we apply the same law to the difference of the two fourth powers, Q = σ ε A (T₁⁴ − T₂⁴), with the object first, so a positive number is heat lost by the object. This net form is our own working from the radiated power formula. The temperatures must be in kelvin, so the calculator adds 273.15 to your Celsius values.

A radiation example

An emissivity of 0.67, an area of 1 m², an object at 100 °C and surroundings at 0 °C give about 525 watts lost. Our calculator shows 525.09 W, using the exact constant from the Stefan–Boltzmann page [3]. The surroundings are treated as a black body, so the answer is an estimate for a real room.

Heating a mass

The basic mode uses Q = m c ΔT, where m is the mass, c the specific heat and ΔT the change in temperature, for a constant specific heat [6]. Two kilograms of water, with c = 4,186 J/(kg·K), warmed from 10 °C to 20 °C need 83,720 joules. Wikipedia gives about 4,184 J/(kg·K) for liquid water at 20 °C [6], so the 4,186 used here is a rounded example value. The sign shows whether the heat is absorbed or released. This mode assumes no phase change, such as melting or boiling, which would need extra heat for the change of state.

Heat transfer coefficient

A heat transfer coefficient calculator is the same law turned round. Rearranging Newton's law of cooling, Q = h A ΔT [4], gives h = Q ÷ (A ΔT). With 60,000 W, 1 m² and a 30 K difference, h = 2,000 W/(m²·K). This covers a single surface and a single fluid. It does not combine layers into an overall coefficient for a multi-layer wall.

Choosing between modes

Use conduction for a wall, a plate or a pipe wall, when you know the temperature on each side. Use convection for a hot plate in air or water, with an estimated coefficient. Use radiation for hot objects in cool surroundings, mainly at high temperatures, since the fourth power makes it grow quickly. In practice, a real situation often has all three at once, and the heat flows add.

Units and limits

The calculator uses SI units. A difference of one degree Celsius equals one kelvin, so conduction and convection can use Celsius values. Radiation needs absolute temperature, and the calculator converts for you. The formulas assume steady conditions. Real heat flow changes as objects warm up, and the coefficient h depends on the fluid, its speed and the shape of the surface.

Putting the modes together

A real object often loses heat in all three ways at once. A hot pipe, for instance, conducts heat through its wall, passes it to the air by convection and radiates some of it to the room. Because the heat flows run in parallel, you can work out each one with the matching mode and add the results, as long as they use the same surface area and the same temperatures. Treat the sum as a rough estimate. For layered walls, heat exchangers or moving fluids, use a method made for that case, and let a qualified engineer check the design before anyone relies on it.

Common mistakes

  • Using Celsius in the radiation formula. The formula needs kelvin: the tool converts, so enter Celsius.
  • Forgetting that conduction gives a rate. Q is in watts unless you add a time.
  • Using an emissivity above 1. It must be between 0 and 1.
  • Mixing area units. Use square metres.

What next

Use this often? Add Heat Transfe to your Home screen.

Frequently asked questions

What is a heat transfer calculator?

A tool that works out the heat flow by conduction, convection or radiation, and the heat needed to change the temperature of a mass.

What is the conduction formula?

Q = k A ΔT ÷ l gives the heat flow in watts through a layer of thickness l.

What is the convection formula?

Q = h A ΔT, with h the heat transfer coefficient in W/(m²·K).

What is the radiation formula?

Q = σ ε A (T1⁴ − T2⁴) with temperatures in kelvin and σ = 5.670374419 × 10⁻⁸ W/(m²·K⁴).

How do I find the heat transfer coefficient?

Divide the heat flow by the area and the temperature difference: h = Q ÷ (A ΔT).

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters