This green card photo maker crops your picture to the 2 × 2 inch square used on US permanent residence applications and gives you three files: a 600 × 600 pixel JPEG under 240 kB for an online Diversity Visa entry, a single print-ready photo and a 6 × 4 inch sheet with several copies to print and cut. It all runs in your browser, so the photo is never uploaded.
Which file you need depends on your route to a green card. The tool covers the size and file rules for each; your expression, lighting and background are up to you, and the decision on whether a photo is acceptable rests with the agency.
Green card photo rules by route
| Route | What is needed |
|---|---|
| Form I-485 (adjustment of status with USCIS) | Two identical colour passport-style photos, 2 × 2 inches [1] |
| Immigrant visa (Form DS-260) | Two identical photos at the interview, 2 × 2 inches (51 × 51 mm), on photo-quality paper [2] |
| Diversity Visa (green card lottery) entry | A digital image: JPEG, 240 kB or less, square, 600 × 600 pixels [2] |
| Diversity Visa selectees | Two identical 2 × 2 inch photos at the interview [2] |
The I-485 photo rules
USCIS asks for two identical colour passport-style photos taken recently, on a white to off-white background, printed on thin paper with a glossy finish, unmounted and unretouched [1]. They must be 2 by 2 inches with a full face, frontal view. The head should measure 1 to 1⅜ inches from the top of the hair to the bottom of the chin, and the eyes should sit between 1⅛ and 1⅜ inches from the bottom of the photo [1]. Your head must be bare unless you wear headwear required by your religion, and you lightly print your name and A-Number, if you have one, on the back in pencil or felt pen [1].
How to make a green card photo here
- Take a photo facing the camera against a plain white or off-white wall, with even light and no shadows.
- Choose the photo. The size is already set to United States (2 × 2 in).
- Drag and resize the box so your head is 1 to 1⅜ inches tall in the square, roughly half to two thirds of its height.
- Press Make photos. Use the print sheet for paper applications and the digital file for an online lottery entry.
Why the digital file is 600 × 600 pixels
The Diversity Visa entry asks for a square digital image of 600 × 600 pixels, in JPEG format and no larger than 240 kB [2]. A 2 × 2 inch photo at 300 pixels per inch is exactly 600 × 600 pixels, the same resolution the State Department asks for when you scan an existing photo [3]. The tool lowers the JPEG quality step by step until the file fits under 240 kB and shows the final size, so you can check it before you upload.
Worked example
You are filing Form I-485 and need two prints. You take a photo against a white wall, choose it here, line up the box so the top of your hair is near the top edge and your chin is a little above the lower third, and press Make photos. The 6 × 4 inch sheet holds several 2 × 2 inch copies; you print it at a photo shop at actual size and cut two identical photos. If a family member is also entering the green card lottery, their 600 × 600 digital file is ready from the same tool.
Printing tips
- Print the sheet at 100% or actual size, never “fit to page”, or the photos shrink.
- Use glossy photo paper, as the I-485 instructions ask [1].
- Cut along the thin grey lines and check one photo with a ruler: it should measure 2 inches on each side.
Common mistakes
- Cropping so tightly that the head is taller than 1⅜ inches.
- Using an old photo. USCIS asks for photos taken recently [1].
- Sending two different photos when the instructions ask for two identical ones.
- Uploading a print sheet to an online entry instead of the 600 × 600 digital file.
Taking the photo at home
You do not need a studio. Stand a step in front of a plain white or off-white wall, face a window so the light is even, and ask someone to take the photo from a few steps away at eye level. Look straight at the camera with a neutral face. Take a few shots and choose the sharpest one, then crop it here and check that your whole head, from the top of the hair to the chin, sits inside the guide.
Use a recent photo that looks like you do today. A photo taken years ago, or one edited to smooth skin or remove marks, can lead to a request for new photos, which delays your case. The I-485 instructions ask for unretouched photos [1], so keep editing to cropping only.
Names on the back
Once the photos are printed and cut, write your name and A-Number, if you have one, lightly on the back with a pencil or felt pen [1]. Press gently so the writing does not show through on the front. Put each photo in a small envelope or attach it as the form instructions describe, so it does not get lost with the other papers.
Family applications
Each applicant needs their own photos. If you are filing for a spouse and children at the same time, make a separate set for each person, and label every set with the right name. For a family entering the Diversity Visa lottery, each person named on the entry needs their own digital file, made the same way.
Related tools
Need a visitor visa photo instead? Use the US visa photo maker. For other countries try the passport photo maker, and check your passport dates with the passport validity checker.
What next
Use this often? Add Green Card P to your Home screen.
Frequently asked questions
What size is a green card photo?
Form I-485 asks for two identical colour photos, 2 by 2 inches, with the head 1 to 1⅜ inches from the top of the hair to the bottom of the chin.
What size is the green card lottery photo?
The Diversity Visa entry needs a square JPEG of 600 × 600 pixels that is 240 kB or smaller.
What background does a green card photo need?
White to off-white, according to the Form I-485 instructions.
Does this tool check that my photo will be accepted?
No. It sets the size and file limits. USCIS or the Department of State decides whether a photo is acceptable.
Is my photo uploaded?
No. It is cropped and saved in your browser and never sent to a server.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.