A flight time calculator tells you how long you'll be in the air. Choose two cities, and this flight time calculator estimates the duration from the distance between them. Or switch to the second mode, enter the local departure and arrival times from your ticket, and it works out the true time in the air, taking the time zones and daylight saving time into account. That second mode is especially handy, because the clock times on a ticket can be very misleading on long routes that cross many time zones.
How to use the flight time calculator
- Choose a mode: an estimate from cities, or the exact time from your ticket.
- For an estimate, pick the two cities and, if you like, an average speed.
- For exact times, enter the date, the time and the time zone at each end.
- Press Calculate.
How the estimate works
- Distance = the great-circle distance between the two cities
- Flight time = distance ÷ average speed + 30 minutes
The default speed is 500 miles per hour. Airliners spend most of a flight in the cruise phase, which is the part between the climb and the descent. Narrow-body jets typically cruise at about 450 knots, and modern wide-body aircraft at around 490 knots, or about 518 and 564 miles per hour. An average of 500 mph is a little below those figures, to reflect the slower parts of a trip. The 30 extra minutes allow for taxiing, climbing and descending.
Flight time examples
The straight-line distance from Delhi to Mumbai is about 717 miles. At 500 mph that takes about 86 minutes, and adding 30 minutes gives an estimate of 1 hour 56 minutes. For the exact method, suppose that a flight leaves New York at 7:00 PM on January 15 and lands in London at 7:00 AM on January 16. New York is five hours behind London in winter, so although the clock appears to show 12 hours, the time in the air is 7 hours.
Why your ticket can look strange
Airlines print departure and arrival times in the local time of each airport. Flying east, you lose hours as you cross time zones, so a flight can seem longer than it really is. Flying west, you gain hours, and you might land only a little later by the clock than when you left, or even earlier. To find the real length, you need to compare the two times in a single time zone, and this is exactly what the calculator does for you.
Why real flight times differ
- Winds: flights heading east on the jet stream are often quicker than those heading west.
- Routes: aircraft follow air corridors, which may avoid certain airspace.
- Air traffic: busy airports can add holding time and taxi delays.
- Aircraft type: some planes fly faster than others.
- Airline schedules: published times often include a margin.
Block time and air time
Airlines usually publish block time, which runs from when the aircraft leaves the gate until it arrives at the gate at its destination. It includes taxiing, so it's longer than the time that the wheels are off the ground. The times on your ticket are block times, and the second mode in this calculator will give you that same figure.
Planning around jet lag
Large time differences can leave you feeling tired and out of sync for a day or two. The calculator shows how far ahead or behind your destination is. If the difference is big, try to get into daylight at your destination, to eat at local mealtimes, and to allow yourself some recovery time before important events.
Allowing for the whole journey
The time in the air is only part of your trip. Add the time you need to get to the airport, check in and pass through security, and then allow for immigration, baggage and the journey to your hotel. A flight of two hours can easily become a door-to-door trip of six hours or more, so it's worth checking this when you're comparing flying with driving or taking the train.
Which mode should you use?
Use the estimate when you are still planning a trip and don't have a ticket yet. It gives you a quick idea of whether a journey is short, medium or long, which helps when you are choosing between destinations. Use the local times mode when you already have a booking, or when you are comparing two flights on an airline's website. The second mode will show you which of the flights really spends less time in the air, even when the clock times make them look alike.
Flights with stops
Each flight on a trip with a connection should be worked out on its own. Add the results together and then add the time you'll spend waiting at the connecting airport. Short layovers can look attractive, but they leave little room for delays, so check how much time your airline recommends.
Common mistakes
- Subtracting clock times directly. Time zones must be taken into account.
- Forgetting the arrival date. Long flights often land the next day.
- Treating an estimate as a schedule. Check with your airline.
Related time tools
Compare clocks with the time zone converter, measure the distance with the distance calculator, and plan a call with the meeting planner.
What next
Use this often? Add Flight Time to your Home screen.
Frequently asked questions
How does the flight time calculator work?
It estimates from the distance between two cities, or compares your local departure and arrival times across time zones.
Why does my ticket show a longer flight?
Local times hide time zones. Compare both times in a single zone to get the real length.
Does it include time zones and daylight saving?
Yes. The local-times mode allows for both.
How accurate is the estimate?
It is a rough guide. Winds, routes and traffic change real flight times.
What speed does it use?
500 mph by default, and you can enter your own.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.