A fish weight calculator estimates what a fish weighs from its length and, when you have it, its girth. Choose trout or salmon, largemouth bass or pike, enter the length in inches or centimetres, and read the weight in pounds and kilograms. It is a rule of thumb for fish that you will release, not a substitute for a scale.
How to use the fish weight calculator
- Choose US or metric units and the kind of fish.
- Enter the length.
- Add the girth if you measured it.
- Press Calculate.
The idea
Anglers often want to know the weight of a fish that they will put back, so they estimate it from the length and the girth. Texas Parks and Wildlife gives one simple rule for any species: square the girth in inches, multiply by the length in inches and divide by 800 to get pounds [1]. This tool uses that rule for largemouth bass, and adds a divisor for trout and a length-only rule for pike. Those two are traditional rules of thumb that no agency page states, so they are the tool's own planning figures.
The three formulas
For trout, the tool uses weight = length × girth² ÷ 900. For largemouth bass, weight = length × girth² ÷ 800, the rule that Texas Parks and Wildlife publishes [1]. For pike, weight = length³ ÷ 2,700. The 900 and 2,700 divisors are not stated by any official page that we found. We do not guess for other species such as sunfish, catfish, herring or sturgeon: the tool covers only these three.
Units
The rule takes the length and the girth in inches and gives pounds [1]. If you choose metric, the calculator converts your centimetres to inches by dividing by 2.54, applies the formula, and converts the pounds to kilograms with 0.45359237. These conversions are our own working, since the rule is published only in inches and pounds.
When you have no girth
Girth is the greatest circumference of the body, not its depth. It is optional here. When you leave it blank, the calculator assumes that the girth is 0.58 times the length and says so in the result. This ratio is our own planning figure: no official page that we found gives it, and we cannot say how accurate it is. If you can measure the girth with a soft tape, the answer will be better.
A trout example
Take a 20-inch trout. With no girth, the girth is 20 × 0.58 = 11.6 inches, and the weight is 20 × 11.6² ÷ 900, which is about 2.99 pounds, or roughly 3 pounds. The calculator shows about 2.99 lb, or 1.36 kg. If you measured a girth of 12 inches instead, you would get 3.2 pounds.
A bass example
For a 27-inch largemouth bass, the girth is taken as 27 × 0.58 = 15.66 inches, and the weight is 27 × 15.66² ÷ 800, which is 8.28 pounds. For comparison, Texas Parks and Wildlife works its own example for a 26-inch bass with a 20.25-inch girth and gets 13.33 pounds, against a real weight of 13.05 pounds [1]. The bass formula divides by 800 and the trout formula by 900, so a bass of the same length and girth comes out a little heavier than a trout.
A pike example
Pike are long and slim, so the page uses only the length: weight = length³ ÷ 2,700. For a 30-inch pike, that is 27,000 ÷ 2,700 = 10 pounds. If you type a girth for a pike, the calculator tells you that it is not used. The cube of the length means that a pike that is 10 percent longer weighs about 33 percent more.
How to measure
Wikipedia defines total length as the straight-line distance from the snout tip to the tip of the longer tail fin lobe, and standard length as the distance from the snout tip to the end of the last vertebra, which leaves out the tail fin [2]. It also notes that standard weight equations for fish use total length [2]. The girth rules above do not say which length they expect, so be consistent, and measure in a straight line, not along the curve of the body. Measure the girth around the thickest part of the body.
Accuracy
A fish of a given length can be much fatter or thinner, depending on the season, the food, the spawning condition and the water. The Texas Parks and Wildlife page checks its rule on one bass only and states no accuracy range [1], and neither do we. Wikipedia notes that the relationship between weight and length is not linear, with an exponent close to 3 for most species [3], which is why the length cubed appears in the pike rule. Treat the result as within perhaps a few tenths of a pound for a small fish, but note that this is our own remark and not a tested figure. For a record or a competition, use a certified scale.
Using the calculator
Pick the kind of fish and the units, type the length, and add the girth if you have it. For catch records, note the length and the girth in the log, and use the estimate only as a quick guide. Handle the fish gently and quickly if you plan to release it, and follow the local rules on size limits, which the calculator does not cover.
Catch and release
If you plan to release the fish, a quick measurement is kinder than lifting it onto a scale. Keep it in the water as much as you can, lay it along a measuring board, note the length, and put it back. The formulas above then give a figure for your log without any handling. Texas Parks and Wildlife offers its rule for exactly this case, a fish that was caught and released [1]. This habit is our own suggestion, and local rules on handling and on size limits always come first.
Comparing the three formulas
Take a length of 24 inches with the default girth of 0.58 times the length, which is 13.92 inches. The trout formula gives 24 × 13.92² ÷ 900, about 5.17 pounds. The bass formula gives the same product divided by 800, about 5.81 pounds. The pike formula gives 24³ ÷ 2,700, about 5.12 pounds. The results are close at this length but pull apart as the fish gets longer, because the pike formula uses the cube of the length alone.
Common mistakes
- Measuring the length along the curve of the body. Use a straight line.
- Mixing up the girth and the depth. Girth is the circumference.
- Using the trout formula for a pike. Choose the right kind of fish.
- Expecting scale accuracy. It is a rule of thumb.
What next
Use this often? Add Fish Weight to your Home screen.
Frequently asked questions
What is a fish weight calculator?
A tool that estimates the weight of a fish from its length and girth.
How do I estimate fish weight without a scale?
Measure the length and girth, then use length × girth² ÷ 900 for trout or ÷ 800 for bass, or length³ ÷ 2,700 for pike.
What girth does the calculator assume?
If you leave it blank, 0.58 times the length, which is the tool's own planning figure.
Which fish does it cover?
Trout or salmon, largemouth bass and pike, the three species that this tool has a formula for.
How accurate is the estimate?
It is a rule of thumb, and the agency source checks it on one fish only.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.