How to resize a picture for your Facebook profile
- Choose your picture. Tap the upload area or drop a JPG, PNG or WebP file onto it.
- Set the crop. Drag the square and its corners until your face or logo is centered.
- Press Make picture. You’ll see a preview of the result.
- Download it, then upload it to Facebook.
Facebook profile picture size
Facebook’s help pages say a Page’s profile picture should be 320 × 320 pixels for best quality. It displays smaller than that, at 176 × 176 pixels on computers and 196 × 196 on smartphones, and it’s cropped to a circle.
Keep the important part in the center
Because the picture appears in a circle, its corners get cut off. Keep faces and logos near the middle, with some space around them. Sizes can change, so check Facebook’s help pages if your picture looks wrong.
Is it private?
Yes. Your picture is processed inside your browser and never sent to our servers. For other sizes, use our image resizer or image cropper.
What the Facebook profile image resizer makes
You get one square JPG, 320 pixels on each side, named facebook-profile-320x320.jpg. The crop box is locked to a square, so you never end up with a stretched face. When you add a picture, the box starts in the middle and covers 80% of the shorter side, which is usually a good starting point for a head and shoulders shot.
Facebook shows a Page’s profile picture at three sizes: 176 × 176 pixels on computers, 196 × 196 pixels on smartphones and 36 × 36 pixels on most feature phones.[1] A 320 pixel file is larger than all of them, so it stays sharp when it is scaled down. That is why Facebook asks for 320 × 320 for best quality rather than the smaller display size.[1]
| Where it shows | Display size | Share of your 320 pixel file |
|---|---|---|
| Computer | 176 × 176 | 55% |
| Smartphone | 196 × 196 | about 61% |
| Most feature phones | 36 × 36 | about 11% |
The last row matters more than it looks. At 36 pixels, a full body photo or a long word turns into a blur, so a close crop of a face or a simple logo works best.
Planning for the circle
Facebook crops the profile picture to a circle.[1] A circle drawn inside a square covers about 78.5% of its area, which is pi divided by four. So roughly a fifth of your square, in the four corners, is never seen. That is our own arithmetic, not a Facebook figure, but it explains why corners are a bad place for anything that matters.
- Faces: leave a little space above the head and keep the chin well above the bottom edge. A face that fills the whole square can lose the top of the hair and the ears.
- Logos: keep the whole logo inside a circle that touches the middle of each side. Square logos with text in the corners are the most likely to be clipped.
- Checking: to see exactly what the circle hides, run the finished file through our circle crop tool before you upload it.
Profile picture and cover photo together
On a Facebook Page, the profile picture sits on top of the cover photo. Facebook’s help page says the left side of the cover is partly covered by the profile picture, and on mobile devices the profile picture overlaps the cover by about 40 pixels.[1] If you are updating both, choose colors that stand apart, so the round picture doesn’t blend into the cover behind it. Our Facebook cover image resizer makes the matching 851 × 315 cover.
Logos, text and transparent pictures
Facebook says profile pictures and cover photos with a logo or text may look better as a PNG file.[1] This resizer always saves a JPG, because JPG keeps photos small. For a photo of a person, that is the right choice. For a logo with fine lines or small letters, check the result closely. If the edges look fuzzy, crop the logo larger so it fills more of the square.
A JPG can’t store transparency, so any see-through parts of a PNG logo become white in the result. If your logo is white on a clear background, it will vanish. Put it on a colored background first, or pick a version of the logo with dark lines.
Worked example: a 3000 × 4000 phone selfie
A typical phone selfie is taller than it is wide. If yours is 3000 pixels wide and 4000 pixels tall, the square crop box starts at 2400 × 2400 pixels in the middle. That often includes too much background, so drag a corner inward until the box is about 1200 pixels across and your face is in the middle. Press Make picture, and the tool scales that square down to 320 × 320. Because 1200 is larger than 320, there’s no warning, and the picture stays sharp.
If you zoom in further, to a box under 320 pixels wide, the tool has to enlarge it and adds a note saying the crop may look soft. Try a slightly larger crop, or a sharper photo, until the note goes away.
Quick checks before you upload
- Is the face centered? Look at the preview and imagine a circle inside it. Nothing important should sit in the corners.
- Is there a warning under the file? If it says the crop was enlarged, make the box bigger and press Make picture again.
- Does it read at a small size? Step back from your screen. If you can’t tell what the picture shows, crop tighter.
- Did you pick the right picture? Pressing Clear removes the picture and the result, so you can start again with another one.
What next
Use this often? Add Facebook Pro to your Home screen.
Frequently asked questions
What size is a Facebook profile picture?
Facebook’s help pages recommend 320 × 320 pixels for a Page’s profile picture. It’s shown smaller, and cropped to a circle.
Are my pictures uploaded?
Not to us. This tool runs in your browser, so your picture stays on your device until you choose to upload it to Facebook.
Will my picture look blurry?
A very small crop can look soft after it’s enlarged. The tool tells you when your crop is smaller than 320 pixels, so you can choose a larger area or a sharper picture.
Why does the Facebook profile image resizer make 320 pixels if Facebook shows 176?
Facebook shows a Page’s profile picture at 176 pixels on computers and 196 on smartphones, but it asks for 320 × 320 for best quality. The larger file stays sharp when it is shown smaller.
Why did my logo get a white background?
The tool saves a JPG, and JPG files can’t be transparent, so see-through areas turn white. Put a white logo on a colored background first so it stays visible.
How much of my square does the circle hide?
A circle inside a square covers about 78.5% of it, so roughly a fifth of the picture, in the corners, is not shown. Keep faces and logos near the middle.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.