Saved

Press the star next to a tool's name to save it.

All my tools

Dog Harness Size Calculator

Use this dog harness size calculator to find XXS to XL from your dog's weight and chest girth, with the larger size shown when they disagree.

Restored your last values ·

Weigh your dog and measure the chest girth with a flexible tape while the dog stands. The calculator reads a size chart by weight and by girth, shows both, and gives the larger of the two as the recommended size.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter your dog's weight and chest girth, then press Find the harness size.

See full result

A dog harness size calculator reads a size chart for you. Enter your dog's weight and chest girth, and the calculator shows the size that matches each, then gives the larger one as the pick, together with the leash width on the chart. It is a starting point before you check the maker's chart.

How to use the dog harness size calculator

  1. Choose US or Metric.
  2. Enter your dog's weight.
  3. Measure the chest girth while the dog is standing, and enter it.
  4. Press Find the harness size and compare the size with the maker's chart.

The size chart

The tool uses a generic chart with six sizes. XXS is for dogs up to 5 pounds with a girth of 8 to 10 inches. XS is 5 to 10 pounds and 9 to 15 inches. S is 10 to 25 pounds and 13 to 23 inches. M is up to 55 pounds and 18 to 29 inches. L is up to 75 pounds and 22 to 39 inches. XL is 75 pounds or more and 28 to 48 inches. This is a general planning chart, not any maker's own; makers publish charts for their own products, as Ruffwear does [1].

Choosing by weight

The chart gives an upper weight for each size, not a range. Our own rule is to take the first size whose weight limit is at least your dog's weight, so 5 pounds is XXS, 25 pounds is S, 55 pounds is M, 75 pounds is L and anything heavier is XL. This rule is our own working. A dog at the top of a band is a borderline case.

Choosing by girth

The girth ranges overlap on the chart, so a girth can fit more than one size. The calculator lists every size whose range contains your measurement. A 21 inch chest, for instance, fits S at 13 to 23 inches and M at 18 to 29 inches. A girth below 8 inches or above 48 inches is outside the chart and the calculator says so.

How the pick is made

When the weight and girth point to different sizes, we show the larger. Ruffwear advises that a growing pup that is truly between two sizes should take the larger size [1]. The calculator takes the larger of the size by weight and the smallest size that fits the girth, which is our own way to apply that advice. If they agree, it just shows that size.

A worked example

A dog weighs 28 pounds and has a 21 inch chest. By weight, 28 is above 25 and up to 55, so the size is M. By girth the sizes are S and M, and the larger of M and S is M. The chart gives a leash width of 3/4 inch for M. A pug of 18 pounds and 17 inches comes out as S, with a width of 5/8 inch. These are our own examples.

Taking the measurements

Ruffwear says to wrap the tape around the widest part of the rib cage, just behind the front legs [1]. We suggest measuring while the dog stands, with a flexible tape that is snug but does not press in. Take the measurement around the chest and write it down in inches or centimetres. Weigh the dog on a scale, or use a recent vet weight. Dogs that are growing or changing weight may move into another size.

Broad chests and the two finger check

Broad-chested breeds may need a size larger than the weight suggests, which is why the tool also reads the girth. A common fit check, and our own advice here, is that a harness should be snug but let you slide two fingers under the straps. Use the calculator for the first guess, then fit the harness on the dog and check that it does not rub or slip.

Leash width

The tool's chart lists a leash width for each size, from 5/16 inch for XXS to 1.25 inches for XL. For L and XL it notes that a two-ply strap is for strong pullers. The calculator gives the width of the recommended size, with a millimetre equivalent that is our own conversion of the stated inches.

Brands and the chart

Sizes differ between brands, since one maker's medium can be another's large. Use the result as a guide to the likely size, then look up the chart of the harness you want and compare your dog's weight and girth with it. If your dog is between two sizes there, choose the one that can be adjusted.

Puppies

Ruffwear recommends sizing from a puppy's current measurements, and notes that many larger dogs reach full size only at around 12 to 18 months [1]. Check the fit every few weeks. A puppy's weight changes quickly, so the figures from this calculator are only good for the day you measure. Repeat the measurements when the harness starts to look tight. The page keeps your numbers in your browser and sends nothing.

When the size by weight and the size by girth differ

Two dogs of the same weight can have very different chests, so the two columns of the chart do not always agree. A lean greyhound type may be light for its girth, while a stocky bulldog type is heavy for a narrow band. When they disagree, the calculator says so in the result line and shows the larger size, in line with Ruffwear's advice for a growing pup between sizes [1]. Then try the harness on the dog, because an adjustable strap can often take up a little extra room, while a strap that is too tight cannot be let out.

Common mistakes

  • Measuring a loose tape. The tape should be snug, not tight.
  • Measuring a sitting dog. Measure the chest girth while the dog stands.
  • Using the weight alone. Check the girth too.
  • Ignoring the brand's own chart. Sizes differ between makers.
  • Forgetting a growing puppy. Measure again every few weeks.

What next

Use this often? Add Dog Harness to your Home screen.

Frequently asked questions

What is a dog harness size calculator?

A tool that reads a size chart for a dog's weight and chest girth and shows the matching harness size.

How do I measure my dog for a harness?

Measure around the chest with a flexible tape while the dog stands, snug but not pressing. Also weigh the dog.

What if weight and girth give different sizes?

The calculator shows the larger size, because Ruffwear advises the larger size for a growing pup between sizes.

Do harness sizes differ between brands?

Yes, they can, so compare with the maker's own chart.

What is the two finger rule?

A harness should be snug but let you slide two fingers under the straps.

Which size is a 28 pound dog with a 21 inch chest?

M. The weight gives M, and the girth fits S and M, so the larger, M, is shown.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Finance Tools