Saved

Press the star next to a tool's name to save it.

All my tools

Dog Crate Size Calculator

Use this dog crate size calculator to find the minimum inside crate length and height from your dog's measurements, adding 2 inches for a smaller dog or 4 for a larger one.

Restored your last values ·

Measure your dog standing: the length from the nose tip to the base of the tail and the height from the floor to the top of the head. Choose a smaller or a larger dog and the calculator adds 2 or 4 inches to find the smallest inside crate size.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter your dog's length and height, choose the dog's size, then press Find the crate size.

See full result

A dog crate size calculator finds the smallest crate that your dog can use comfortably. Measure your dog's length and height, say whether the dog is smaller or larger, and the calculator adds 2 or 4 inches to each so that the dog has room to stand, turn around and lie down.

How to use the dog crate size calculator

  1. Choose US or Metric.
  2. Measure the length from the tip of the nose to the base of the tail, and the height from the floor to the top of the head.
  3. Choose a smaller dog or a larger dog.
  4. Press Find the crate size and compare the result with the inside size of the crate.

The rule behind the calculator

Orvis recommends adding 2 to 4 inches to your dog's measurements: 2 inches for smaller dogs and 4 inches for larger ones [1]. The American Kennel Club gives a slightly larger range, adding 3 to 4 inches to each measurement [2]. This tool uses the Orvis figures, which is our choice, and so its allowance is at the lower end of what the AKC suggests. The calculator adds the allowance to the length and to the height and shows the extra room it used.

How to measure the length

Stand your dog on a flat floor and measure from the nose to the tail [1]. The AKC says to measure from the tip of the nose to the tip of the tail [2]. This calculator leaves the tail itself out and measures to the base of the tail, which is our own working, so if you include the tail your result will be a little larger. Use a soft tape or a piece of string, and write down the number in inches or centimetres, matching the choice that you make in the calculator.

How to measure the height

Orvis measures the height from the top of the head or the ears to the ground [1], and the AKC measures a standing dog from the top of the head to the bottom of the feet [2]. If the ears stand up, measure to the tips of the ears, as the Orvis wording allows. Measure with the dog standing normally, as the crate must let the dog stand without crouching.

A worked example

Take a dog that is 30 inches long and 24 inches high, and choose a larger dog. The allowance is 4 inches, so the minimum crate length is 34 inches and the minimum height is 28 inches. A smaller dog of the same measurements would get 32 by 26 inches. These examples are our own, as the pages we read do not give a worked case.

Why the size matters

The AKC says your dog needs enough room to sit, stand and lie down comfortably in the crate [2], and PetMD adds that the dog should be able to turn around and fully extend its limbs when lying on its side [3]. Too much space has a cost too. The AKC warns that a crate that is too large may encourage a dog to eliminate in it, because the dog can sit away from the mess [2]. Orvis likewise says that a crate that is too big can interfere with housebreaking [1].

Smaller or larger dog

The pages we read do not say where a smaller dog ends and a larger dog begins [1][2]. So the choice is yours. Think of the build of your dog: a small, light breed gets the 2 inch allowance and a big, heavy breed the 4 inch allowance. If your dog is in the middle, you could try both settings and see which crate sizes you have available.

Length and height only

The pages say to add the allowance to the measurements, and the AKC says to add it to each one [2]. We apply the same allowance to both the length and the height. PetMD also notes that a dog sitting in the crate needs at least 2 inches of clearance above its head, and that bedding takes up space [3], so treat the result as a minimum.

The width

We do not calculate a width. No page we read gives a number for it. Orvis says only that the width will be commensurate with the other dimensions [1]. Most crates are made in standard shapes, so once the length and height are met, a crate of the usual width for that size will normally do. Check that your dog can turn around easily.

Inside size and crate sizes

Puppies and travel

A puppy grows, so you may need to buy a crate for the adult size and use a divider for now. The AKC suggests an expandable crate as large as the typical adult size of the breed, with a divider that you move as the puppy grows [2], and Orvis suggests a movable partition in a metal crate [1]. The calculator works for any dog, but the numbers for a puppy are only good for today. Airlines and cars have their own crate rules that this page does not cover, so check those separately with the airline or the maker. Your measurements stay in your browser.

Checking the crate once it arrives

When the crate arrives, put your dog inside and watch. The dog should be able to stand with ease, turn around comfortably and lie on its side with the limbs fully extended [3]. If the crate is too tight, PetMD says to go up a size, and if it is too big for a puppy it can lead to accidents, so use a divider [3]. The calculator gives the smallest size to start with, so a crate a little bigger than the result is fine for a grown dog, as long as it is not much larger than the result suggests.

Common mistakes

  • Measuring the tail. The length stops at the base of the tail.
  • Measuring a sitting dog. Measure the standing height.
  • Reading the allowance as the full size. The result is the dog plus 2 or 4 inches.
  • Forgetting the divider for a puppy. A crate that is too big can undo housetraining.
  • Comparing with the outside size. Check the inside measurements.

What next

Use this often? Add Dog Crate Si to your Home screen.

Frequently asked questions

What is a dog crate size calculator?

A tool that adds a 2 or 4 inch allowance to your dog's length and height to find the smallest inside crate size.

How much bigger than my dog should a crate be?

The pages we read say 2 to 4 inches more than the dog: 2 inches for a smaller dog and 4 inches for a larger one.

How do I measure my dog for a crate?

Measure the length from the nose tip to the base of the tail, and the height from the floor to the top of the head or the ear tips if they stand up.

What about the crate width?

The pages give no number. Orvis says the width should be in proportion to the other dimensions.

Can a crate be too big?

Yes. A crate that is too large for a puppy may be used as a toilet, so use a divider.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Finance Tools