Saved

Press the star next to a tool's name to save it.

All my tools

Diamond Carat Calculator

Use this diamond carat calculator to estimate the carat weight of a diamond from its shape, length, width and depth in millimetres, with optional girdle and shape corrections.

Restored your last values ·

mm
mm
mm
mm
%
%

Choose the shape of the diamond and enter its measurements in millimetres. A round stone needs the diameter and depth; other shapes need the length, width and depth. The girdle thickness and the shape correction are optional percentages. You get the estimated weight in carats.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose the shape and enter the size in millimetres, then press Calculate.

See full result

A diamond carat calculator estimates the weight of a diamond from its size. Choose the shape, enter the measurements in millimetres, and it multiplies them by a factor for that shape to give an estimate in carats, with the weight in milligrams and grams.

How to use the diamond carat calculator

  1. Choose the shape of the diamond.
  2. Enter the diameter for a round stone, or the length and width for other shapes, then the depth, all in millimetres.
  3. Add the girdle thickness and the shape correction if you know them.
  4. Press Calculate.

What a carat is

A metric carat is defined as 200 milligrams [2], which is one fifth of a gram. Each carat is divided into 100 points [2]. So a diamond of 1.071 carats weighs 214.2 milligrams. The calculator gives the estimate in carats, milligrams and grams, using the 200 milligram definition.

Why size gives weight

A stone cannot be put on a scale when it is mounted in a ring, but its outline and depth can be measured with a gauge. Because diamond has a fixed density, the weight is close to proportional to the volume, which for a given cut is close to length times width times depth times a factor. The round-stone factor comes from a trade formula [1]. The factors for the other shapes are the tool's own planning figures, because we found no grading laboratory that publishes them.

The round brilliant

For a round stone, the trade formula is carats equal to the average diameter squared, times the total depth, times 0.0061 [1]. The tool also multiplies by one plus the girdle thickness. A stone 6 millimetres across and 2 millimetres deep, with no girdle correction, is 36 times 2 times 0.0061, or 0.439 carats, which is 87.8 milligrams. A 6.5 millimetre stone that is 4 millimetres deep gives 1.031 carats.

Other shapes with a fixed factor

For fancy shapes, the weight is the length times the width times the depth times a factor, then times one plus the girdle, and one plus the shape correction. The trade article says the round-stone method applies only to round brilliants and that fancy shapes need a different approach [1]. The factors for the shapes with one value are 0.0080 for Asscher, 0.00915 for baguette, 0.00815 for cushion, 0.0059 for heart, 0.0062 for oval, 0.0083 for princess and 0.0057 for trillion. These are our own planning factors.

Shapes where the ratio matters

Emerald, marquise, pear and radiant stones have a factor that depends on the length to width ratio. The tool lists a few ratios for each shape, such as 1.5 to 1 for a pear, which is 0.0060. When yours falls between two listed ratios, the tool uses the nearer one, and takes the lower ratio when the two are equally near. That rule is our own.

Girdle thickness

The girdle is the thin edge round the stone. A thicker girdle adds weight that the outline and depth do not show. The trade article says a thick girdle may call for an allowance of three to six percent [1]. Our own rough guide is: very thin or thin, 0 to 1 percent; medium, 1 to 3 percent; thick or very thick, 3 to 6 percent; extra thick, over 6 percent. We take a round stone as usually 1 to 3 percent. The box takes a percentage and uses it as one plus that percentage.

The shape correction

The correction is for the way that a shape deviates from the standard: for instance, pear wings add 1 to 5 percent, marquise, oval and heart shoulders add 1 to 10 percent, a large culet adds 1 to 2 percent, wide corners on emerald and radiant stones take off 1 to 5 percent, and a bulging pavilion on an emerald, radiant or trillion cut adds 1 to 18 percent. These are the tool's own visual estimates. A round stone gets no correction, so the tool ignores the box for round.

Worked examples

An oval of 8 by 6 by 3.6 millimetres, with no corrections, is 172.8 times 0.0062, which is 1.071 carats, and this is the figure the tool returns. A pear of 6 by 4 by 3 millimetres, a ratio of 1.5 to 1 and a factor of 0.006, with a girdle of 2 percent and a correction of 5 percent, is 72 times 0.006 times 1.02 times 1.05, or 0.463 carats.

Limits of an estimate

The result is only as good as the measurements and the factors. Millimetre measurements to a tenth, taken with a gauge, give a weight to about two decimal places at best. We do not know how accurate the shape factors are, and we did not find a grading laboratory that publishes them. Never use the figure to set a price. A graded certificate is the only reliable source of the carat weight.

Using the calculator

Pick the shape and enter the measurements. Use the diameter for round stones and the length and width for the others, and do not swap them: the tool takes the longer side as the length for the ratio. Fill in the girdle if the jeweller told you, and leave the boxes blank if not. Read the estimated carats, and compare it with the certificate or the receipt.

Choosing the shape on your certificate

Look at the shape named on the certificate or the receipt and choose the same one here. A stone sold as a cushion cut may be nearly square or clearly rectangular, but the factor is the same for both, so the length and the width carry the difference. For a princess cut, which is square in outline, enter the same figure for the length and the width. Small differences in the outline change the result only a little, which is why an estimate of this kind is useful for a quick check but never replaces a weighing on a calibrated scale.

Common mistakes

  • Measuring in inches. The box wants millimetres.
  • Using the diameter for an oval. Enter the length and the width.
  • Treating the result as a certified weight. It is an estimate.
  • Entering the girdle as a fraction. Use a percentage, such as 2.

What next

Use this often? Add Diamond Cara to your Home screen.

Frequently asked questions

What is a diamond carat calculator?

A tool that estimates the weight of a diamond in carats from its shape and its measurements in millimetres.

How many milligrams is a carat?

One carat is 200 milligrams, or one fifth of a gram.

What is the formula for a round diamond?

Carats equal diameter squared times depth times 0.0061, times one plus the girdle percentage.

How accurate is the estimate?

It is an approximation from published shape factors, so a graded certificate should be used for the true weight.

Why does the calculator ignore the shape correction for round stones?

The shape correction is for fancy shapes only, so a round stone is calculated without it.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Finance Tools