A crosswind calculator splits the wind into a part that blows across your path and a part that blows along it. Enter the wind speed, the direction it is coming from and the heading of the runway or route, and the calculator shows the crosswind, the headwind or tailwind, and the angle between the wind and your heading, including which side the wind is coming from.
What is a crosswind?
Wikipedia explains that when winds are not parallel to or directly with or against the line of travel, the wind is said to have a crosswind component. The wind splits into the headwind or tailwind component in the direction of travel, and the crosswind component perpendicular to it. In aviation, a crosswind is the component of wind that is blowing across the runway, and it is reported in knots, abbreviated kt.
The crosswind formula
Crosswind = wind speed × sin(angle)
Headwind (or tailwind) = wind speed × cos(angle)
Wikipedia gives this rule: the crosswind component is the wind speed multiplied by the sine of the angle between the wind and the direction of travel, and the headwind component is found the same way using the cosine. The angle is the difference between the direction the wind is coming from and the heading. The calculator takes care of wrapping around 360 degrees, so a wind from 350 degrees and a heading of 10 degrees is an angle of 20 degrees.
How to use the crosswind calculator
- Enter the wind speed and choose its unit: knots, mph, km/h or m/s.
- Enter the wind direction in degrees. This is the direction the wind comes from, as in a weather report.
- Enter the heading of your runway or route in degrees. For a runway, add a zero to its number, so runway 09 is 090 degrees.
- Press Calculate to see the crosswind, the headwind or tailwind and which side the wind comes from.
Worked examples
- 10 knots at 45 degrees: Wikipedia's example gives a crosswind of 10 × sin 45° and a headwind of 10 × cos 45°, both equal to 7.07 knots.
- 15 knots from 300° on runway 27 (heading 270°): the angle is 30°, so the crosswind is 15 × 0.5 = 7.5 knots from the right, and the headwind is 15 × 0.866 = 12.99 knots.
- 25 knots at 30°: the crosswind is 12.5 knots and the headwind is 21.65 knots, which matches the chart example on Wikipedia, about 13 and 22 knots.
- 10 knots from directly behind: the angle is 180°, so the headwind figure is −10, which the calculator reports as a 10-knot tailwind.
Which side is the wind on?
The calculator reports whether the crosswind comes from the right or the left of your heading. If the wind direction is greater than the heading by up to 180 degrees, it comes from the right, as for a wind from 300 degrees on a heading of 270. If it is smaller, it comes from the left. The side matters when you correct for the wind, because you steer toward it or position the control inputs accordingly.
Headwind and tailwind
A positive cosine means the wind is partly against you, which is a headwind and raises your speed through the air for a given ground speed. A negative cosine means the wind is partly behind you, a tailwind. The calculator names the component correctly. A strong tailwind component on landing or take-off is a reason for caution, since it increases the ground speed.
A rule of thumb
You can estimate without a calculator. A wind at 30 degrees to your heading gives about half its speed as crosswind, a wind at 45 degrees gives about 70 percent and a wind at 60 degrees gives about 87 percent. A wind at 90 degrees is all crosswind. These shortcuts come from the sine function, and the calculator gives the exact numbers for your case.
Beyond aviation
The same idea works for any journey where the wind matters. Cyclists, sailors and drivers of high vehicles all feel the component of wind across their path. To convert between wind speed units, use the speed converter.
Reading a wind report
A weather report gives the wind as a direction and a speed, such as 300 degrees at 15 knots, and may add a gust figure, such as gusting 25 knots. Enter the speed for both the steady wind and the gust to see the range of crosswind you might meet. The direction in the report is the direction the wind is blowing from, which is the number the calculator needs. If the wind is reported as variable, try a few directions to see how the crosswind changes.
Why the angle matters so much
The crosswind grows quickly as the angle increases from zero, then flattens near 90 degrees. A change of 10 degrees at a small angle makes a bigger relative difference than the same change at a large angle. This is why a small shift in wind direction can turn a comfortable landing into a difficult one, and why the calculator reports the exact angle as well as the components.
Common mistakes
- Using the direction the wind blows to. Weather reports give the direction it comes from.
- Mixing magnetic and true directions. Use the same reference for both the wind and the heading.
- Forgetting gusts. Check the strongest reported wind as well as the average.
- Ignoring limits. Always compare the result with the limits for your aircraft or vehicle.
What next
Use this often? Add Crosswind to your Home screen.
Frequently asked questions
How does a crosswind calculator work?
It finds the angle between the wind direction and your heading, then multiplies the wind speed by the sine of that angle for the crosswind and by the cosine for the headwind.
How do you calculate crosswind component?
Multiply the wind speed by the sine of the angle between the wind and your direction of travel. For 10 knots at 45 degrees that is 10 × sin 45°, which is 7.07 knots.
What is the difference between headwind and crosswind?
The headwind blows along your path, against you, and the crosswind blows across it. Together they make up the wind.
What heading do I use for a runway?
Add a zero to the runway number. Runway 27 is a heading of 270 degrees and runway 09 is 090 degrees.
Can the calculator show a tailwind?
Yes. If the wind has a component behind you, the headwind figure is negative and the calculator reports it as a tailwind.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.