A cocktail batch calculator scales a recipe for one drink up to a whole party. Enter the guests, the drinks each person will have and the volume of one drink. The cocktail batch calculator then gives the total ingredients, the dilution water to add for a stirred or shaken drink, the ice and the spirit to buy. It works for punch bowls and pitcher cocktails.
How to use the cocktail batch calculator
- Choose US or metric units.
- Pick stirred or shaken, or type your own dilution percentage.
- Enter the number of guests and drinks each.
- Enter the volume of one drink before dilution: all the liquid ingredients, for example 3 fl oz.
- Optional: add the ice per glass, the spirit in one drink and its strength.
- Press Calculate for the batch.
Why a batch needs added water
When you shake or stir a drink with ice, some of the ice melts into it. If you mix a big batch ahead and pour it over fresh ice, or serve it without shaking, that water is missing, so the drink tastes strong. Adding measured water to the batch puts it back.
Death & Co says shaking is aggressive and adds dilution quickly, usually about 20 to 25 percent water to the overall cocktail. Stirring is more gradual and typically adds 15 to 20 percent. [1] The calculator uses the middle of each range: 22.5 percent for a shaken drink and 17.5 percent for a stirred drink. You can type your own percentage if you prefer a stronger or lighter drink.
The formula
Dilution is a share of the finished drink, so water = ingredients x d / (1 - d), where d is the dilution as a decimal. Finished volume = ingredients + water. For one drink, the finished volume is the ingredient volume divided by (1 - d). That reading of the percentage as a share of the finished cocktail is our interpretation of the source wording.
| Style | Dilution used | Water per 3 fl oz drink |
|---|---|---|
| Stirred | 17.5% | 0.64 fl oz |
| Shaken | 22.5% | 0.87 fl oz |
Standard drinks and bottles
The National Institute on Alcohol Abuse and Alcoholism defines a US standard drink as 14 grams of pure alcohol, for example 1.5 fl oz of 40 percent spirits, 5 fl oz of 12 percent wine or 12 fl oz of 5 percent beer. [2] The calculator scales that spirit example: standard drinks per serving = spirit in fl oz x ABV / 60, because 1.5 x 40 = 60. Bottles are 750 mL, which is about 25.36 fl oz, rounded up.
A worked example
Ten guests with two drinks each is 20 drinks. Each drink starts at 3 fl oz of ingredients, so the ingredients total 60 fl oz.
- Shaken: water = 60 x 0.225 / 0.775 = 17.42 fl oz. The batch is 77.42 fl oz, or 3.87 fl oz per drink.
- Stirred: water = 60 x 0.175 / 0.825 = 12.73 fl oz. The batch is 72.73 fl oz.
- Ice at 4 oz per glass: 20 x 4 / 16 = 5 lb.
- Spirit at 1.5 fl oz of 40 percent per drink: 30 fl oz, about 2 bottles of 750 mL, and 1 standard drink per serving.
Ice
Ice for the glasses is separate from the water you add. The batch water stands in for the ice that would have melted while mixing; the ice in the glass is extra and melts further as people drink. The ice per glass is your own choice. A few ounces in a rocks glass is common, but it depends on the glass and how fast people drink, so treat the default as a rule of thumb and buy a little extra.
Choosing the glass size
Enter the volume of one finished serving before dilution, not the size of the glass. A coupe or Nick and Nora glass holds about 3 to 5 fl oz of finished drink, while a rocks glass or highball holds more because ice takes up space. If your recipe lists 2 fl oz of spirit, 1 fl oz of juice and 0.75 fl oz of syrup, the volume to enter is 3.75 fl oz. For a punch served in cups, use the ladle or cup size and a lower dilution if the bowl will have a block of ice in it.
Planning how many drinks
A common party plan is two drinks per guest for the first hour and one drink per hour after that, but that is a rule of thumb, not a figure from our sources. Enter the total drinks each guest will have for the evening. If some guests will not drink alcohol, reduce the guest count for the alcoholic batch and make a separate non-alcoholic batch. Round the bottle count up to the next whole bottle so the bar does not run dry before the end of the night.
Tips for batching
- Add citrus juice no more than a few hours ahead; it dulls and turns bitter.
- Keep the batch chilled and add the ice or sparkling ingredients when serving.
- Do not add bubbly ingredients to the batch: top each glass instead.
- Taste a finished sample and adjust with a little water or sweetener.
- Offer a non-alcoholic option for guests who do not drink and for drivers.
Common mistakes
- Forgetting the water, so the batched drink is too strong and too warm.
- Counting the ice in the glass as the dilution. It is separate.
- Using one drink size for the recipe and another for the guests.
- Buying exact bottle counts with no spare.
- Scaling syrups and bitters by eye instead of by the same ratio.
Run the cocktail batch calculator once for each recipe and add the results together for a menu with more than one drink.
What next
Use this often? Add Cocktail and to your Home screen.
Frequently asked questions
How much water should I add to a batched cocktail?
Death and Co puts the water from stirring at 15 to 20 percent of the drink and from shaking at 20 to 25 percent. The calculator uses 17.5 and 22.5 percent, or your own figure.
How does a cocktail batch calculator work out the dilution water?
Water = ingredients x d / (1 - d), where d is the dilution as a decimal. Dilution is treated as a share of the finished drink.
What is a standard drink in the US?
NIAAA defines it as 14 grams of pure alcohol, such as 1.5 fl oz of 40 percent spirits, 5 fl oz of 12 percent wine or 12 fl oz of 5 percent beer.
How many bottles of spirit do I need for a party?
Multiply the spirit in each drink by the number of drinks, then divide by 750 mL (25.36 fl oz) and round up. The calculator does this when you enter the spirit per drink.
Can I use the cocktail batch calculator for punch?
Yes. Treat the punch as one drink recipe, enter the glass size, and use a dilution that matches how it will be served. Add ice to the bowl at serving time.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.