Saved

Press the star next to a tool's name to save it.

All my tools

Background Remover

Upload a picture with a plain, even background, such as a logo or a product on white. You’ll get a PNG with that background made transparent.

Works best on plain, even backgrounds. It isn’t an AI tool, so busy photos won’t come out well.

Your image is processed on this device and never uploaded.

Your transparent PNG

Your picture will appear here, ready to download.

What this tool is good at

This tool works best when the background is one plain, even color that reaches the edges of the picture. It isn’t an AI cutout tool, so it doesn’t know what’s in your photo.

Your imageResult
Logo on white or a solid colorUsually clean
Product on a plain backdropUsually good
Screenshot or scanned signatureOften good
Portrait or a busy sceneWon’t work well
Fine detail, such as hairEdges may look rough

How it works

  1. It averages the four corners to find the background color.
  2. Starting at the picture’s edges, it spreads through connected pixels close to that color.
  3. Those pixels become transparent, and the rest stays as it was.

White areas inside your subject stay, unless they connect to the background.

Getting a better result

  • Start with Medium. If some background is left, try High.
  • If it eats into your subject, try Low.
  • Crop first if the corners aren’t background. Try the image cropper.

Is my image private?

Yes. Everything runs in your browser, so your image is never uploaded. To add a new color behind your picture or make other changes, try the photo editor.

How to use the background remover

  1. Add your picture. Drop a JPG, PNG or WebP file on the upload box, or tap it to choose one.
  2. Choose how much to remove. Leave it on Medium (recommended) for your first try.
  3. Press Remove background. You’ll see a preview of your picture with the background taken out.
  4. Check the edges, then download. If some background is left, or part of your subject went missing, change the setting and press the button again.

Worked example: a logo on a white background

Each pixel holds a red, green and blue value, each a whole number from 0 to 255.[1] Pure white is 255 for all three. The tool measures how far a pixel’s color is from the background color as a straight-line distance across those three values, then compares it with the strength you chose: 30 for Low, 60 for Medium and 100 for High.

Say your logo sits on white, with a light gray shadow under it and a slightly darker shadow near the logo’s edge:

Pixel color (red, green, blue)Distance from whiteLowMediumHigh
White (255, 255, 255)0RemovedRemovedRemoved
Light gray (230, 230, 230)about 43KeptRemovedRemoved
Gray (200, 200, 200)about 95KeptKeptRemoved

So Medium clears the white and the faint shadow, and High also takes the darker shadow. A pixel is only removed if it touches other removed pixels all the way back to the edge of the picture, so a gray part of the logo itself stays.

Why you always get a PNG

A pixel also has a fourth value, alpha, which sets how see-through it is.[1] The tool sets alpha to zero for every background pixel and leaves its color numbers alone. Only some formats can store that. PNG uses lossless compression and has full transparency support, while JPEG has no alpha channel.[2] So the result is always a PNG, named after your file with “-no-background” added, such as logo-no-background.png. The result panel shows its size in pixels and its file size.

A PNG of a photo can be larger than the JPG you started with, because nothing is thrown away when it’s saved. That’s normal.

When the corners aren’t background

The background color is the average of the four corner pixels. If your subject reaches a corner, such as a product cut off at the bottom of the frame, that corner pulls the average toward the subject’s color. The average then matches neither, and very little is removed.

When less than 3% of the picture is cleared, the tool shows a note saying so. Crop the picture so all four corners show only background, or try a higher strength.

Limits of this background remover

  • Picture size. Up to 50 MB and 16 megapixels. A 4000 × 4000 picture fits. A 24-megapixel camera photo doesn’t, so make it smaller with the image resizer first.
  • Hard edges. Each pixel is either fully cleared or kept, with no soft blend. Edges that fade into the background can keep a thin halo of its color.
  • Enclosed areas. Background inside a closed shape, such as the hole in a letter O, stays because it doesn’t connect to the edge.
  • One picture at a time. Run each picture separately.

How this tool works

This tool removes a plain background by color, in your browser. It does not use AI, and your picture is not uploaded. It accepts JPG, PNG and WebP up to 50 MB and 16 million pixels.

  • It averages the colors of the four corners and treats that as the background color.
  • Starting at every edge pixel, it spreads across connected pixels whose color is within a set distance of that color, and makes them transparent.
  • The strength setting sets the distance: 30 for low, 60 for medium and 100 for high.

Because it spreads only from the edges, parts of your subject that share the background color stay if they are enclosed. It works best on solid backdrops. If less than 3 percent of the picture is removed, the tool warns you. The result is a PNG.

What next

Use this often? Add Background R to your Home screen.

Frequently asked questions

Can it remove the background from any photo?

No. It works best on plain, even backgrounds, such as a logo on white. It’s not an AI tool, so busy photos and portraits won’t come out well.

What file do I get?

A PNG, because that format keeps the transparent areas. JPG can’t store transparency.

Are my images uploaded?

No. It all runs in your browser, so your image stays on your device.

Why was only part of the background removed?

The background may have shadows or uneven color. Try the High setting, or crop the picture so its corners show only background.

What does the background remover’s strength setting change?

It sets how far a color can be from the background color and still be removed: 30 for Low, 60 for Medium and 100 for High. A light gray shadow on white goes at Medium; a darker gray one needs High.

Why is there a light outline around my picture?

Edges that blend into the background have colors in between, and those that are too far from the background color stay. Try High, but check it doesn’t eat into your subject.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Image Tools