Saved

Press the star next to a tool's name to save it.

All my tools

Average Calculator (Mean)

Paste or type your numbers, separated by commas, spaces or new lines, and this average calculator shows the mean straight away, with the sum, count, median, mode and range.

Separate numbers with commas, spaces or new lines. Negative numbers and decimals are fine. You can paste a column from a spreadsheet.

Average (mean)

–

Enter at least one number to see the average.

An average calculator finds the mean of a list of numbers: add them all up and divide by how many there are. Type or paste your numbers above and the mean appears straight away, along with the sum and count used to work it out, the median, the mode and the range.

Average formula

Mean = sum of the values ÷ number of values

This is the arithmetic mean, the value most people mean by "the average". The NIST/SEMATECH e-Handbook of Statistical Methods defines it as the sum of the data points divided by the number of data points.

How to use the average calculator

  1. Enter your numbers. Separate them with commas, spaces or new lines, or paste a column from a spreadsheet.
  2. Read the mean. It updates as you type, with the sum ÷ count shown underneath.
  3. Check the other measures. The table gives the median, mode, smallest and largest values and the range.

Worked example

Five test scores are 72, 85, 90, 64 and 89. Their sum is 400, and there are 5 scores, so the mean is 400 ÷ 5 = 80. Sorted, the scores are 64, 72, 85, 89, 90, so the median, the middle value, is 85. No score repeats, so there is no mode, and the range is 90 − 64 = 26.

Mean, median and mode

  • Mean. The sum divided by the count. Every value affects it.
  • Median. The middle value once the numbers are sorted. With an even count, it is the mean of the two middle values.
  • Mode. The value that appears most often. A list can have more than one mode, or none if no value repeats.

When the numbers are spread evenly, the three are close together. One very large or very small value pulls the mean towards it but barely moves the median. For example, the mean of 30, 32, 35 and 300 is 99.25, while the median is 33.5. For a closer look at the middle value, use the median calculator.

Weighted averages

This calculator gives every number the same weight. If some values count more than others, such as an exam worth half of a course grade, you need a weighted average instead. The grade calculator works out weighted averages of scores.

Tips for entering numbers

Use a dot for decimals, such as 2.5. Commas separate numbers, so write 1200 rather than 1,200. Anything that isn't a number is listed in a message, so you can fix it before trusting the result.

Reading the average calculator results

The mean is shown as the main result, with the working underneath as sum ÷ count, so you can check it. The table then lists:

  • Count. How many numbers were read from your list.
  • Sum. All the numbers added together.
  • Median. The middle value once the list is sorted.
  • Mode. The value or values that appear most often, or “None” if no value repeats.
  • Smallest and largest. The lowest and highest values in the list.
  • Range. The largest value minus the smallest.

Results show up to six decimal places. The mean of 1, 2 and 2, for example, is shown as 1.666667.

Worked example: an even count with two modes

Enter 3, 7, 7, 2, 9 and 2. The sum is 30 and there are 6 numbers, so the mean is 30 ÷ 6 = 5. Sorted, the list is 2, 2, 3, 7, 7, 9. With an even count, the median is the mean of the two middle values, 3 and 7, which is also 5. Both 2 and 7 appear twice, so the calculator lists two modes, 2 and 7. The range is 9 − 2 = 7.

When the mean can mislead

The NIST/SEMATECH e-Handbook notes that for skewed data the mean and median are not the same, and the mean is pulled in the direction of the skewness.[1] For data with extreme values in the tails, it says the median gives a better estimate of location than the mean.[1] A few very large values can raise the mean well above most of the numbers in your list. If your mean and median are far apart, report both, or look at the median first.

Averaging percentages and averages

A plain mean of percentages is only right when each percentage comes from the same total. Suppose you scored 80% on a 10-question quiz and 60% on a 40-question test. The calculator gives a mean of 70% for 80 and 60, but you actually got 8 + 24 = 32 of 50 questions right, which is 64%. The bigger test should count four times as much. The same problem comes up when you average the averages of groups of different sizes. In both cases, use a weighted average instead, such as the weighted average calculator.

Averaging speeds and rates

Rates need care too. Say you drive 60 miles at 30 mph and then another 60 miles at 60 mph. Entering 30 and 60 gives a mean of 45, but that isn’t your average speed. The first leg takes 2 hours and the second takes 1 hour, so you cover 120 miles in 3 hours, which is 40 mph. You spend longer at the slower speed, so it counts for more. When each rate covers the same distance, the right figure is the harmonic mean, which the geometric mean calculator also works out. When each rate covers the same time, the plain mean from this calculator is correct.

Common mistakes

  • Typing zeros for missing values. A 0 is a real number and pulls the mean down. Leave out values you don’t have.
  • Thousands separators. A comma splits numbers, so 1,200 is read as 1 and 200. Type 1200.
  • Units mixed in one list. Averaging minutes with hours, or grams with kilograms, gives a meaningless result. Convert everything to one unit first.
  • Too many numbers. The calculator takes up to 10,000 numbers at a time.

What next

Use this often? Add Average Calc to your Home screen.

Frequently asked questions

How does the average calculator find the average of numbers?

Add all the numbers together, then divide by how many numbers there are. For 4, 8 and 12, the sum is 24 and there are 3 numbers, so the average is 8.

Is the average the same as the mean?

Usually, yes. In everyday use "average" means the arithmetic mean, the sum divided by the count. The median and mode are other kinds of average.

What is the difference between mean and median?

The mean is the sum divided by the count; the median is the middle value once the numbers are sorted. A single very large or small value moves the mean much more than the median.

Can I average negative numbers and decimals?

Yes. Enter them as they are, such as -3 or 2.75, and they are included in the sum and count.

Can I average percentages with this calculator?

Only when every percentage is out of the same total. If they come from different totals, such as a 10-question quiz and a 40-question test, a weighted average gives the right answer.

What if my list has two modes?

The calculator lists every value that appears most often. For 3, 7, 7, 2, 9 and 2, both 2 and 7 appear twice, so it shows 2 and 7 as modes.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Math Tools