An australia passport photo size tool should give you a print of 35 mm by 45 mm, which sits at the small end of the range in the Australian guidance for photographers. This one crops your picture to that size, shows it in pixels and builds a 6 × 4 inch sheet to print and cut, all inside your browser.
How to use the australia passport photo size
- Press Tap to choose a photo and pick a JPG, PNG or WebP picture of your face.
- Drag the box so your head sits in the middle, and drag a corner to make the box larger or smaller.
- Press Make photos.
- Download the single photo or the print sheet.
Australia passport photo size: what the guidance says
The Camera Operator Guidelines for Australian passport photos, which carry the passports.gov.au name, list a print size of 35 to 40 mm wide by 45 to 50 mm high [1]. They also ask for heavy, glossy prints of at least 200 gsm, a white or light grey background that contrasts with the subject, and no shadows on the background [1]. The document we opened is a copy hosted on an Australian embassy site, and it does not show a date, so check the current page on passports.gov.au before you apply.
Why this tool uses 35 × 45 mm
The guidance gives a range rather than a single size. We chose 35 × 45 mm, the lowest value in both ranges, because it is the commonly used size and fits the rule. An Australian consulate page that we also opened says photos should be at least 45 mm high by 35 mm wide and that they should not be trimmed if bigger [2]. Both pages agree that 35 × 45 mm is acceptable.
What the tool does
It crops your photo to a 7 : 9 box, scales it to 413 × 531 pixels, which is the size at 300 dots per inch, and fills any area outside your picture with white. You get one photo and a print sheet. The tool does not retouch the picture. The guidance says no retouching is permitted, and that only brightness and contrast may be adjusted [1], so keep your original camera file.
Head size
The embassy guidance we read does not state a head size. The consulate page gives 32 mm to 36 mm from the top of the head, not the hair, to the bottom of the chin [2]. It is a page of an Australian consulate, but it is not the passport office's own guide, so treat it as a guide. When you drag the crop box, the head should fill about 71% to 80% of the 45 mm height. This is our own working from that range.
Background and lighting
The guidance asks for even, shadowless light on the face and a white or light grey background, with no shadows on the background [1]. Stand a little way in front of a plain wall, and use daylight from a window facing you rather than a lamp at the side. This tool does not change the background of your picture, so take the photo against the right colour to begin with.
Expression and glasses
The guide asks for a neutral expression, eyes open and clearly visible, a face centred and facing the camera, and no hair or head covering across the face [1]. If glasses must be worn for medical reasons, the frames must not obscure the eyes, there must be no reflections, and a medical certificate is required [1]. Take the photo again if any of this is not right.
The print sheet
The tool also builds a 6 × 4 inch sheet at 300 dpi and fills it with copies of the photo, each with a thin grey line to cut along. Because each photo is 413 × 531 pixels at that resolution, the sheet holds 8 copies. Print it at actual size on photo paper, with no scaling or fit-to-page option, and cut along the lines. Our own working: the pixel sizes come from the millimeter sizes at 300 dots per inch. Home printing is a risk for official use, as noted above.
Privacy
Your photo stays in your browser. The tool does not upload it anywhere, so you can use a picture of a child. When you close the page, the pictures are removed from memory.
What to check before you apply
The Australian guidance describes prints made by a photographer, using a professional process. A home printout may not be accepted, so ask the passport office or an authorised photographer what is allowed for your application. Check the size with a ruler. For a smaller file, use our image size reducer, and check the validity of your travel document with the passport validity checker.
Common mistakes
- Retouching the picture. The guidance does not allow retouching beyond brightness and contrast.
- Forgetting the background. It should be white or light grey and free of shadows.
- Trimming a larger photo. The consulate page says not to trim photos that are bigger than 35 × 45 mm.
- Printing on thin paper. The guidance asks for heavy, glossy prints of at least 200 gsm.
What next
Use this often? Add Australia Pa to your Home screen.
Frequently asked questions
What is the australia passport photo size?
The Australian guidance lists a print of 35 to 40 mm wide by 45 to 50 mm high. This tool makes 35 × 45 mm.
How many pixels is a 35 × 45 mm photo?
At 300 dpi it is 413 × 531 pixels, which is the size this tool produces for the print.
What background colour is used in Australia?
White or light grey, with no shadows, according to the camera operator guidelines.
What is the head size for an Australian passport photo?
The guide we read gives none. A consulate page gives 32 mm to 36 mm from the top of the head to the chin.
Does this tool check that my photo passes?
No. It only sets the size and makes a print sheet. You must check the head, the light and the background.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.