Saved

Press the star next to a tool's name to save it.

All my tools

Audio Pitch and Tempo Changer

Use this audio pitch tempo changer to shift a recording up or down by up to 12 semitones and speed it up or slow it down between 50% and 200%, in your browser.

%

Pitch is in semitones from -12 to 12. Tempo is a percentage, where 100 is the original speed.

Your file is processed in your browser. Nothing is uploaded.

FFmpeg runs in your browser as ffmpeg.wasm (GPL-2.0-or-later). The first use downloads about 10 MB.

Your file

Choose an audio file, enter the semitones and tempo and press Change pitch and tempo.

This audio pitch tempo changer shifts the key of a recording and changes its speed, separately, and saves an MP3, in your browser.

How the audio pitch tempo changer works

Pitch and speed are linked in a plain recording. Playing a track faster raises its pitch and slowing it lowers the pitch. Time stretching and pitch scaling separate the two, so one can change while the other stays fixed. [1] This tool does it in two steps. First it changes the sample rate by the ratio for your semitone shift, which moves pitch and speed together. A semitone is a ratio of the twelfth root of 2, so +2 semitones multiplies the rate by about 1.1225. Then the atempo filter corrects the speed to the tempo you asked for. [2]

Worked example

Take a song that is a little too low for your voice. Enter 2 semitones and leave the tempo at 100 percent. The key goes up a whole tone and the song keeps its length. To practise a fast guitar solo, set the pitch to 0 and the tempo to 70 percent: the track lasts about 1.43 times as long, because 100 divided by 70 is 1.43, with the same notes. A 3 minute song becomes about 4 minutes 17 seconds.

Common settings

GoalPitchTempo
Raise a song by a whole tone+2100
Lower a song by a fifth-7100
Slow down to practise070 to 80
Tighten a recording0105 to 110
Octave up+12100

The output is an MP3 at 192 kbit/s. [3] Large shifts and big tempo changes add artefacts such as a metallic or watery sound; this effect depends on the method used. Keep changes small for the cleanest result.

Audio pitch tempo changer tips

  • Use whole semitones to match a known key. Fractions such as 0.5 are allowed for fine tuning.
  • Change only one control at a time while you listen to the result.
  • Voices become unnatural over about 4 semitones.
  • Keep the original so you can try again with other settings.

Privacy, limits and the FFmpeg core

This page runs FFmpeg as ffmpeg.wasm, a WebAssembly build that works inside your browser tab. [4] The first time you press the button the page downloads the converter, about 10 MB, and keeps it for the rest of the visit. Your audio is read from your own disk into the browser, processed there and handed back as a download. It is never uploaded, so it works for private recordings and you can use it offline once the converter has loaded.

Files up to 500 MB are accepted. Long or high resolution files take noticeably longer than they would in a desktop program, because a browser build of FFmpeg runs on a single thread and has less memory to work with. Keep the tab open until the progress figure reaches 100%, and press Stop if you change your mind. The FFmpeg core in this build is licensed under GPL-2.0-or-later, which is why the licence note sits under the button.

Step by step with the audio pitch tempo changer

  1. Press the upload box and choose an audio file.
  2. Type the pitch change in semitones, such as 2 or -3.
  3. Type the tempo percentage, where 100 is the original.
  4. Press Change pitch and tempo and wait for the progress to reach 100%.
  5. Download the MP3 and listen to it.

Who uses the audio pitch tempo changer

Singers move a backing track into a comfortable key, musicians slow a passage to learn it, dancers speed a track to fit a routine, and teachers slow a recording of speech for language learners.

Common mistakes to avoid

  • Changing pitch and tempo by large amounts together.
  • Entering 0.5 tempo instead of 50.
  • Expecting studio quality for large shifts.
  • Forgetting that negative semitones lower the key.

Quality, formats and browser notes

Audio is encoded by the encoders built into FFmpeg: LAME for MP3, the native AAC encoder, libvorbis for OGG and libopus for Opus. Output settings are fixed to common values so you do not need to know codec jargon, and the result plays on any phone, computer or car stereo that supports the format. Chrome, Edge, Firefox and Safari on a computer all run the tool. On a phone a very long recording can be slow or fail if the browser runs short of memory, so split it into smaller parts or use a computer.

Why simple resampling is not enough

The easiest way to make audio faster is to play the samples quicker, but that also raises the pitch. Reaching a new pitch at the same speed needs time stretching. Methods such as the phase vocoder and overlap-add work on short windows of sound, which is why heavy changes sound smeared or robotic, especially on drums and consonants. Keep changes modest for the best sound.

If something goes wrong

If the page says the converter could not be loaded, check your internet connection, because the 10 MB core is fetched the first time you use it, and reload the page. If the job fails on a particular file, it may be damaged or encoded in a way this browser build of FFmpeg does not support; try playing it in a media player first. Very long recordings need a lot of browser memory, so cut them into parts if the page stops. Pressing Stop ends the job at once and frees the memory, and you can start again with other settings.

What next

Use this often? Add Audio Pitch to your Home screen.

Frequently asked questions

What is a semitone?

A semitone is the smallest step on a piano keyboard. Twelve semitones make one octave, which doubles the frequency.

Can I change tempo without changing pitch?

Yes. Set the pitch to 0 and change only the tempo percentage.

What range does the audio pitch tempo changer allow?

Pitch from -12 to +12 semitones and tempo from 50% to 200%.

Why does a big change sound odd?

Stretching and shifting audio adds artefacts, and the more you change, the more audible they get.

Is my audio uploaded?

No. The work is done in your browser.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Video & Audio Tools