Saved

Press the star next to a tool's name to save it.

All my tools

Audio Joiner

Use this audio joiner to merge two or more sound files into one MP3 in the order you set, with no upload, in your browser. Up to 20 files can be joined.

Use the arrows to put the files in order. They play one after the other in the final MP3.

Your file is processed in your browser. Nothing is uploaded.

FFmpeg runs in your browser as ffmpeg.wasm (GPL-2.0-or-later). The first use downloads about 10 MB.

Your file

Add two or more audio files, put them in order and press Join audio.

This audio joiner merges several sound files into a single MP3 in the order you choose, in your browser.

How the audio joiner works

The audio joiner uses the concat filter, which plays the inputs one after another as a single stream. [1] Before they are joined each file is converted to the same sample rate, 44,100 Hz, and to stereo, so that files with different settings, such as a mono voice memo and a stereo song, join without errors. The result is encoded as MP3 at 192 kbit/s. [2]

Worked example

You have an intro of 12 seconds, an interview of 8 minutes and an outro of 15 seconds. Add the three files, move them into that order and press Join audio. The result lasts 8 minutes 27 seconds. Because file size is bit rate times duration divided by eight, [3] the MP3 is about 12.2 MB, since 192,000 times 507 seconds divided by 8 is 12.17 million bytes.

Ordering the files

  • Add all the files in one go or in several steps. The list keeps them in the order added.
  • Use Move up and Move down to reorder, and Remove to drop one.
  • The first file in the list plays first.
  • Up to 20 files can be joined at one time.

There is no crossfade, so each file starts as soon as the one before ends. A gap of silence has to be part of the files themselves.

Audio joiner tips

  • Match the loudness of the files before joining, because the tool does not normalise volume.
  • Name your files with numbers so you can add them in order.
  • For a long audiobook keep files under the 500 MB each limit and join in groups.
  • If one file fails, it may be damaged; remove it and try again.

Privacy, limits and the FFmpeg core

This page runs FFmpeg as ffmpeg.wasm, a WebAssembly build that works inside your browser tab. [4] The first time you press the button the page downloads the converter, about 10 MB, and keeps it for the rest of the visit. Your audio files is read from your own disk into the browser, processed there and handed back as a download. It is never uploaded, so it works for private recordings and you can use it offline once the converter has loaded.

Files up to 500 MB are accepted. Long or high resolution files take noticeably longer than they would in a desktop program, because a browser build of FFmpeg runs on a single thread and has less memory to work with. Keep the tab open until the progress figure reaches 100%, and press Stop if you change your mind. The FFmpeg core in this build is licensed under GPL-2.0-or-later, which is why the licence note sits under the button.

Step by step with the audio joiner

  1. Press the upload box and add your audio files.
  2. Use Move up and Move down to put them in order.
  3. Remove any file you do not want.
  4. Press Join audio and wait for the progress to reach 100%.
  5. Download the MP3.

Who uses the audio joiner

Podcasters add an intro and outro, teachers combine lesson parts, musicians make a demo from several takes, and people merge voice memos into one recording.

Common mistakes to avoid

  • Adding files in the wrong order.
  • Joining files with very different loudness.
  • Expecting a crossfade between tracks.
  • Adding more than 20 files in one go.

Quality, formats and browser notes

Audio is encoded by the encoders built into FFmpeg: LAME for MP3, the native AAC encoder, libvorbis for OGG and libopus for Opus. Output settings are fixed to common values so you do not need to know codec jargon, and the result plays on any phone, computer or car stereo that supports the format. Chrome, Edge, Firefox and Safari on a computer all run the tool. On a phone a very long recording can be slow or fail if the browser runs short of memory, so split it into smaller parts or use a computer.

Matching sample rate and loudness

Files from different sources differ in sample rate, channels and volume. The tool matches the first two automatically, converting everything to 44,100 Hz stereo. Volume is left alone, so a quiet voice memo placed next to a loud song will jump in level. If that matters, adjust the loudness of the files in an audio editor before joining, so that the listener does not have to keep changing the volume.

If something goes wrong

If the page says the converter could not be loaded, check your internet connection, because the 10 MB core is fetched the first time you use it, and reload the page. If the job fails on a particular file, it may be damaged or encoded in a way this browser build of FFmpeg does not support; try playing it in a media player first. Very long recordings need a lot of browser memory, so cut them into parts if the page stops. Pressing Stop ends the job at once and frees the memory, and you can start again with other settings.

What next

Use this often? Add Audio Joiner to your Home screen.

Frequently asked questions

How do I join audio files?

Add two or more files, put them in the order you want and press Join audio. One MP3 downloads.

Can I join different formats?

Yes. MP3, M4A, WAV, FLAC, OGG and other files can be mixed, because each is converted to the same settings first.

Is there a crossfade between files?

No. Each file starts when the previous one ends.

How many files can the audio joiner combine?

Up to 20 files in one job.

Are my files uploaded?

No. The files are read and joined in your browser.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Video & Audio Tools