Saved

Press the star next to a tool's name to save it.

All my tools

Audio Cutter

Use this audio cutter to cut a song or recording between a start and end time and save it as MP3, for a ringtone or a short clip, in your browser.

Enter times as seconds (30), minutes and seconds (1:05) or hours. Leave the end blank to keep everything after the start.

Your file is processed in your browser. Nothing is uploaded.

FFmpeg runs in your browser as ffmpeg.wasm (GPL-2.0-or-later). The first use downloads about 10 MB.

Your file

Choose an audio file, enter a start and end time and press Cut audio.

This audio cutter trims a song or recording to the start and end time you enter and saves it as an MP3, in your browser, ready to use as a ringtone.

How the audio cutter works

The audio cutter passes your start and end to FFmpeg using the -ss and -to options, so only the section between them is kept. [1] The piece is then encoded as MP3 at 192 kbit/s. MP3 is a lossy format that supports rates from 32 to 320 kbit/s, [2] and 192 is a good balance of quality and size for a short clip.

Worked example: a ringtone

Phones commonly use clips of 20 to 30 seconds for ringtones. To take the chorus that starts at 1:05 and ends at 1:30, enter 1:05 and 1:30. The clip is 25 seconds. At 192 kbit/s it is about 600 KB, found by multiplying bit rate by duration and dividing by eight. [3] Save the MP3 and set it as your ringtone in the phone settings. On some phones the ringtone must be in a particular folder or format such as M4R or M4A, which this tool does not write.

Time formats

You typeMeaning
9090 seconds
1:301 minute 30 seconds
0:01:30.51 minute 30.5 seconds
(blank end)To the end of the file

Audio cutter tips

  • Listen in your player and note the exact start and end before cutting.
  • Cut slightly before a beat starts, so the clip does not begin in the middle of a note.
  • For several clips from one file, run the cutter once for each.
  • To join clips back together use the audio joiner.

Privacy, limits and the FFmpeg core

This page runs FFmpeg as ffmpeg.wasm, a WebAssembly build that works inside your browser tab. [4] The first time you press the button the page downloads the converter, about 10 MB, and keeps it for the rest of the visit. Your audio is read from your own disk into the browser, processed there and handed back as a download. It is never uploaded, so it works for private recordings and you can use it offline once the converter has loaded.

Files up to 500 MB are accepted. Long or high resolution files take noticeably longer than they would in a desktop program, because a browser build of FFmpeg runs on a single thread and has less memory to work with. Keep the tab open until the progress figure reaches 100%, and press Stop if you change your mind. The FFmpeg core in this build is licensed under GPL-2.0-or-later, which is why the licence note sits under the button.

Step by step with the audio cutter

  1. Press the upload box and choose your audio file.
  2. Type the start time, for example 1:05.
  3. Type the end time, for example 1:30.
  4. Press Cut audio and wait for the progress to reach 100%.
  5. Download the MP3 and play it.

Who uses the audio cutter

People make ringtones and alert sounds, podcasters cut a sound bite or an intro, and students trim a section of a lecture to practise or quote.

Common mistakes to avoid

  • Cutting in the middle of a word or a note.
  • Typing a start time later than the end.
  • Making a ringtone longer than your phone allows.
  • Expecting M4R or other phone specific formats.

Quality, formats and browser notes

Audio is encoded by the encoders built into FFmpeg: LAME for MP3, the native AAC encoder, libvorbis for OGG and libopus for Opus. Output settings are fixed to common values so you do not need to know codec jargon, and the result plays on any phone, computer or car stereo that supports the format. Chrome, Edge, Firefox and Safari on a computer all run the tool. On a phone a very long recording can be slow or fail if the browser runs short of memory, so split it into smaller parts or use a computer.

Fade in, fade out and clicks

Cutting audio at a random point can leave a faint click, because the waveform jumps from one level to another. Cutting at a quiet moment, such as the gap between words or just before a beat, avoids it. This tool makes a straight cut with no fade, so choose your start and end in quiet places. For a ringtone, many people also start a fraction of a second before the sound so that nothing is clipped.

If something goes wrong

If the page says the converter could not be loaded, check your internet connection, because the 10 MB core is fetched the first time you use it, and reload the page. If the job fails on a particular file, it may be damaged or encoded in a way this browser build of FFmpeg does not support; try playing it in a media player first. Very long recordings need a lot of browser memory, so cut them into parts if the page stops. Pressing Stop ends the job at once and frees the memory, and you can start again with other settings.

What next

Use this often? Add Audio Cutter to your Home screen.

Frequently asked questions

How do I cut an MP3 online?

Choose the file, type the start and end times and press Cut audio. The clip is ready to download as MP3.

Can I make a ringtone with this audio cutter?

Yes. Cut a 20 to 30 second part of a song and save it as MP3, then set it as your ringtone in your phone.

Does the cut reduce quality?

The clip is re-encoded as MP3 at 192 kbit/s, which sounds close to the original for most listening.

Can I cut a video soundtrack?

Yes. Choose a video file and you get the cut audio as MP3.

Is the audio uploaded?

No. It is processed in your browser.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Video & Audio Tools