This audio converter changes the format of a sound file, such as WAV to MP3 or M4A to FLAC, or pulls the sound out of a video, all in your browser.
What this audio converter does
Audio formats fall into two groups. Lossy formats such as MP3 discard detail that is hard to hear to make files much smaller; the MP3 standard allows bit rates from 32 to 320 kbit/s, and 128 kbit/s is a common compromise. [1] Lossless formats such as FLAC and WAV keep every sample. FLAC compresses the audio to typically 50 to 70 percent of its original size and decodes back to an identical copy. [2] This audio converter reads either kind, plus the sound of a video file, and writes the format you pick.
Typical jobs: turning WAV or FLAC masters into MP3 for a phone, changing a voice memo in M4A or an old WMA file into MP3 so any player opens it, extracting the soundtrack of a video as MP3 or WAV, or making a lossless FLAC or AIFF copy for editing. The output settings are fixed to sensible values: 192 kbit/s for MP3, AAC and M4A, 128 kbit/s for Opus, high quality Vorbis for OGG, and 16-bit PCM for WAV and AIFF.
Worked example
A 3 minute song stored as a 30 MB WAV is too large to send. Convert it to MP3 at 192 kbit/s. File size is bit rate times duration divided by eight, [3] so 192,000 bits per second times 180 seconds divided by 8 is 4.32 MB. The WAV was 1,411 kbit/s, so the MP3 is about 14 percent of its size and still sounds close for everyday listening.
Which output format to choose
| Format | Type | Best for |
|---|---|---|
| MP3 | Lossy | Maximum compatibility |
| AAC / M4A | Lossy | Apple devices, good quality per megabyte |
| OGG / Opus | Lossy | Open formats, speech and web |
| WAV / AIFF | Uncompressed | Editing and mastering |
| FLAC | Lossless | Archiving music in less space |
| WMA | Lossy | Old Windows software |
Converting from a lossy file to a lossless one does not bring back lost detail. A FLAC made from an MP3 is larger but sounds the same as the MP3, so keep lossless conversions for sources that were lossless to begin with.
Audio converter tips
- Convert from the best source you have. MP3 to MP3 at a lower rate always costs quality.
- Pick WAV or FLAC when you plan to edit, and MP3 or M4A when you plan to share.
- Cover art and tags are not carried over to every format, so add them again in your music player if needed.
- For smaller voice files use the MP3 compressor, which offers rates down to 32 kbit/s and mono.
Privacy, limits and the FFmpeg core
This page runs FFmpeg as ffmpeg.wasm, a WebAssembly build that works inside your browser tab. [5] The first time you press the button the page downloads the converter, about 10 MB, and keeps it for the rest of the visit. Your audio is read from your own disk into the browser, processed there and handed back as a download. It is never uploaded, so it works for private recordings and you can use it offline once the converter has loaded.
Files up to 500 MB are accepted. Long or high resolution files take noticeably longer than they would in a desktop program, because a browser build of FFmpeg runs on a single thread and has less memory to work with. Keep the tab open until the progress figure reaches 100%, and press Stop if you change your mind. The FFmpeg core in this build is licensed under GPL-2.0-or-later, which is why the licence note sits under the button.
Step by step with the audio converter
- Press the upload box and choose an audio file or a video.
- Open the Convert to list and pick MP3, AAC, WAV, FLAC or another format.
- Press Convert audio and wait for the progress to reach 100%.
- Press Download to save the new file.
- Listen to it once to check it before deleting the original.
Who uses the audio converter
Podcasters change WAV recordings to MP3 for publishing, musicians produce WAV or FLAC for editing, and people with older music collections turn WMA or OGG files into MP3 so a car stereo or phone will play them. Students also pull a lecture soundtrack out of a recorded video.
Common mistakes to avoid
- Converting a lossy file such as MP3 to FLAC and expecting better quality.
- Re-encoding the same file to MP3 several times.
- Choosing WAV for a long recording and then finding the file is huge.
- Forgetting that tags and cover art may not carry over.
Quality, formats and browser notes
Audio is encoded by the encoders built into FFmpeg: LAME for MP3, the native AAC encoder, libvorbis for OGG and libopus for Opus. Output settings are fixed to common values so you do not need to know codec jargon, and the result plays on any phone, computer or car stereo that supports the format. Chrome, Edge, Firefox and Safari on a computer all run the tool. On a phone a very long recording can be slow or fail if the browser runs short of memory, so split it into smaller parts or use a computer.
Sample rate, channels and bit depth
Besides the format, audio has other properties. CD quality is 44,100 samples per second, two channels and 16 bits per sample, which comes to 1,411 kbit/s. [4] This tool keeps the original sample rate and channels where the target format allows it, and writes 16-bit samples for WAV and AIFF. That is why a WAV from a mono voice memo is half the size of a stereo one of the same length.
What next
Use this often? Add Audio to your Home screen.
Frequently asked questions
Which formats does this audio converter handle?
It reads MP3, AAC, M4A, WAV, FLAC, OGG, Opus, WMA, AIFF, AMR, AC3 and the audio of most video files, and writes MP3, AAC, M4A, WAV, FLAC, OGG, Opus, WMA or AIFF.
Can I convert a video to MP3 here?
Yes. Choose the video file, pick MP3 as the output and the picture is dropped, leaving only the soundtrack.
Is the conversion lossless?
Only when both the source and the target are lossless, such as WAV to FLAC. Any conversion to MP3, AAC, OGG, Opus or WMA is lossy.
Does it upload my audio?
No. The conversion runs in your browser with ffmpeg.wasm and the file never leaves your device.
Why is my WAV so much bigger than the MP3?
WAV stores uncompressed samples at about 1,411 kbit/s for CD quality, while an MP3 at 192 kbit/s is roughly seven times smaller.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.