An alcohol dilution calculator tells you how much water to add to a spirit to bring it to a lower strength. Enter the volume and the strength of the spirit and the strength you want, and it gives the water to add. It also converts between percentage alcohol by volume and proof, in the US and UK systems.
How to use the alcohol dilution calculator
- Choose what you want.
- Enter the volume, the strength and the target.
- Or enter an ABV or a proof to convert.
- Press Calculate.
The dilution formula
When you add water to a spirit, the amount of ethanol stays the same, so the strength times the volume is the same before and after: C₁ V₁ = C₂ V₂. The pages that we read do not state this, so it is our own working from the definition of strength. To dilute 100 of 40 percent spirit to 20 percent, the final volume is 100 × 40 ÷ 20 = 200, so you add 100 of water.
What ABV means
The alcohol by volume is the volume of ethanol divided by the volume of the solution, both at 20 degrees Celsius [2]. The page says that this is not the same as the volume fraction expressed as a percentage [2]. In a 100 millilitre bottle of 50 percent alcohol by volume, water would be added to 50 millilitres of ethanol to make up exactly 100 millilitres [2]. The calculator takes the strength as ABV.
Volume contraction
Mixing two solutions of alcohol of different strengths usually changes the volume [2]. When 50 parts of alcohol are mixed with 50 parts of water, the result is between 96 and 97 parts [1]. The page says that the maximum difference is less than 2.5 percent, and that it is less than 0.5 percent for concentrations under 20 percent [2]. The calculator ignores this, so the real volume is a little less and the strength a little higher than shown. The working line says so.
US proof
In the United States, the alcohol proof is defined as twice the percentage of ABV [1]. So 40 percent ABV is 80 proof, and 100 percent alcohol is 200 proof. The page says that 50 percent alcohol by volume was defined as 100 proof, so whisky at 43 percent ABV is 86 proof [1]. The calculator converts in either direction.
UK proof
The proof in the United Kingdom, from 1816, was equal to about 1.75 times the percentage of ABV, so it is only necessary to multiply the ABV by 7/4 [1]. A spirit with 40 percent ABV is 70 proof in that system, and pure alcohol is 175 proof [1]. The older definition was that 100 proof is a strength equal to 12/13 of the specific gravity of pure water, equivalent to 57.15 percent ABV [1]. The calculator uses the 1.75 factor, which gives 57.14 for 100 proof.
A worked example
To dilute 750 of a 50 percent spirit to 40 percent, the final volume is 750 × 50 ÷ 40 = 937.5, so you add 187.5 of water. To make 500 of a 20 percent liqueur base from a 40 percent spirit, you need 250 of the spirit and 250 of water. These examples are our own calculations. In each case the volume of the final mix is slightly less than the sum because of contraction.
Practical tips
Add the water to the spirit slowly and stir. Cold water and a cool spirit mix with less change in temperature, and the strength depends on the temperature, so measure at 20 degrees Celsius for the best match with the definition. For a strict result, use a hydrometer after mixing, and adjust. Labels in the United States state the strength at 16 degrees Celsius, as the page notes [1].
Using the results
Use the calculator to bring a high-strength spirit to drinking strength, to prepare a solution of a given strength for a recipe or to convert the proof on a label. It is not a guide to safe drinking, and it does not cover the distilling of spirits, which is regulated in many countries. Always follow the laws of your own country.
Example recipes
To make a liqueur from a 40 percent spirit and sugar syrup, work out the water in the syrup as part of the dilution. If the final strength should be 25 percent and you start with 500 of spirit, the final volume is 800, so 300 of syrup and water go in together. The sugar adds volume too, so the real strength is a little different, and a hydrometer helps.
Cask strength spirits
Spirits bottled at cask strength may be 55 to 65 percent ABV. To bring one to 46 percent, enter the strength and the volume, and the calculator gives the water to add. Add it in small steps, tasting as you go, since small amounts of water change the flavour more than you expect.
Temperature
Warm liquids are slightly larger, so measure the volumes at about 20 degrees Celsius.
Common mistakes
- Adding the volumes as if they were exact. Ethanol and water shrink slightly.
- Mixing the proof systems. US proof is 2 × ABV, UK proof about 1.75 × ABV.
- Diluting to a stronger target. The target must be lower.
- Measuring at the wrong temperature. The definition is at 20 °C.
What next
Use this often? Add Alcohol Dilu to your Home screen.
Frequently asked questions
What is an alcohol dilution calculator?
A tool that finds the water needed to dilute a spirit, and converts ABV to proof.
How do I dilute alcohol to a lower strength?
Use C₁V₁ = C₂V₂. The final volume is V₁ × ABV₁ ÷ ABV₂, and the water is the difference.
How do I convert ABV to US proof?
Multiply by 2. 40 percent ABV is 80 proof.
How do I convert ABV to UK proof?
Multiply by 7/4. 40 percent ABV is 70 proof.
Do water and alcohol volumes add exactly?
No. They shrink slightly when mixed, by less than 2.5 percent at most.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.