A tonnage calculator for aggregate turns the size of an area and the depth of a layer into the weight of material you need to order. Enter the length, the width, the depth and the unit weight, and it gives the weight in short tons and metric tonnes, with an allowance for waste and an optional cost.
How to use the tonnage calculator
- Choose US or metric units.
- Enter the length, the width and the depth of the area.
- Choose gravel or crushed stone, or enter the unit weight.
- Add a waste percentage and a price if you like, then press Calculate.
What this tonnage calculator does
This tool works out the weight of aggregate, such as gravel or crushed stone, that fills a rectangular area to a given depth. The method is our own working from volume and bulk density. It is not the tonnage of a press brake, and it is not the cooling capacity of an air conditioner. Those are different calculators. The result is in short tons of 2,000 pounds and in metric tonnes of 1,000 kilograms [2], so that you can compare it with the way your supplier quotes.
Area and volume
The area is the length times the width, and the volume is that area times the depth. This is our own working with standard geometry. In US mode, the depth is in inches, so the calculator divides it by 12 to get feet, multiplies, and divides by 27 to give cubic yards, because a cubic yard is exactly 27 cubic feet [3]. In metric mode, the depth is in centimetres. The tool shows the area and the volume in both unit systems, so that you can check them against a plan or a quote.
Weight from the unit weight
The weight is the volume times the unit weight of the material, which is our own working. The unit weight is the mass of one cubic yard or one cubic metre. This is the figure that depends on the material, and it is the main source of error. Wikipedia says the bulk density of gravel varies from 1,460 to 1,920 kg/m3, or 2,460 to 3,240 pounds per cubic yard [1]. A heavier stone gives a larger weight for the same volume, and a damp or compacted load weighs more than a loose, dry one. Always check the figure with the supplier for the product you plan to buy.
Gravel and crushed stone presets
The tool offers two presets: 2,498 pounds per cubic yard for gravel and 2,700 pounds per cubic yard for crushed stone. The gravel figure lies inside the range of bulk densities that Wikipedia gives for gravel [1]. The page gives no figure for crushed stone, so the 2,700 preset is a typical value that we chose, and not a sourced one. For any other material, such as sand or topsoil, choose to enter the unit weight yourself. We do not guess values for materials that we have no source for.
A worked example
Take gravel at 2,498 pounds per cubic yard, covering 2 square yards to a depth of 0.25 yard. The volume is 0.5 cubic yard, so the weight is 1,249 pounds. Dividing by 2,205 gives 0.566, and dividing by 2,000 gives 0.6245 short tons. This is our own arithmetic. In this calculator, enter 6 feet by 3 feet by 9 inches and choose gravel. You get 0.5 cubic yard, 1,249 pounds, 0.6245 short tons and 0.5665 metric tonnes.
Short tons and metric tonnes
A short ton is 2,000 pounds, or about 907.18 kilograms, and a metric tonne is 1,000 kilograms, or 2,204.62 pounds [2]. We show both, and we also show the pounds divided by 2,205, a rounded tonne, in a separate line, so you can see why the numbers differ by about 10 percent. The conversion factors, 0.45359237 kilograms per pound and 0.764554858 cubic metres per cubic yard, are exact [3].
Coverage per tonne
A tonne of gravel at 2,498 pounds per cubic yard covers about 6.75 square metres at a depth of 10 centimetres. This is our own working. That unit weight is roughly 1,482 kilograms per cubic metre, because 1 ÷ (0.10 × 1.482) = 6.75. For crushed stone at 2,700 pounds per cubic yard, a tonne of 2,205 pounds fills about 0.82 cubic yard, because 2,205 ÷ 2,700 = 0.82. Both figures follow from the presets, and they change if your supplier quotes a different unit weight.
Waste and cost
The waste and cost steps are our own working. If you enter a waste percentage, the calculator multiplies the weight by one plus that percentage, to give the amount to order. If you enter a price, it multiplies the amount to order by the price per ton. In US mode, the price is per short ton. In metric mode, it is per metric tonne. Check your supplier's unit before you compare quotes.
A note on exact conversions
Exact conversions are used throughout. For example, 6.75 square metres is about 72.7 square feet, because one square metre is about 10.764 square feet. The tool covers rectangular areas only. For a circle or an irregular patch, split the shape into rectangles or use an area calculator first. The depth that you enter should be the finished depth after compaction, since loose material settles once it is spread and rolled.
Tips for ordering
Measure the area at the surface you will fill and the depth after compaction. Add waste for spillage, uneven ground and settling, and round the order up to the next load size that your supplier sells. Get the unit weight in writing, since it changes the weight by 10 or 20 percent between products. When in doubt, ask for the weight ticket on delivery and compare it with this estimate.
Common mistakes
- Using the wrong ton. A short ton is 2,000 pounds and a metric tonne is about 2,205 pounds.
- Entering the depth in the wrong unit. It is inches in US mode and centimetres in metric mode.
- Guessing the unit weight. Ask the supplier for the figure.
- Forgetting waste. Add a percentage for spillage and settling.
What next
Use this often? Add Aggregate To to your Home screen.
Frequently asked questions
What is a tonnage calculator?
A tool that turns the area, the depth and the unit weight of a material such as gravel into the weight to order.
What is the unit weight of gravel?
Wikipedia gives a bulk density of 1,460 to 1,920 kg/m3, or 2,460 to 3,240 pounds per cubic yard. The tool presets 2,498 for gravel and 2,700 for crushed stone.
Is a ton 2,000 pounds or 2,205 pounds?
A US short ton is 2,000 pounds. A metric tonne is 1,000 kilograms, which is about 2,204.62 pounds.
How much extra should I order for waste?
There is no fixed figure. This tool lets you enter your own percentage.
Can I use the tonnage calculator for sand or topsoil?
Yes, if you enter the unit weight from your supplier.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.