Saved

Press the star next to a tool's name to save it.

All my tools

Add Decimals Calculator

Type your numbers into this add decimals calculator to add them exactly, with the decimal points lined up. You can also subtract, multiply or divide decimals, without any rounding errors.

Restored your last values ·

Numbers are worked from top to bottom. You can also separate them with spaces.

Your numbers stay in your browser. Nothing is uploaded.

Answer

–

Enter your numbers, and press Calculate.

An add decimals calculator takes the care out of lining up the decimal points. Adding a column of numbers with different numbers of decimal places is an easy place to slip, and even ordinary software can get it slightly wrong. Type your numbers, one on each line, and this add decimals calculator gives you the exact total, along with the working lined up on the decimal point just as you'd write it on paper. You can also switch to subtract, multiply or divide. It uses exact decimal arithmetic, so a sum such as 0.1 + 0.2 comes to precisely 0.3, with no stray digits at the end.

How to use the add decimals calculator

  1. Choose the operation: add, subtract, multiply or divide.
  2. Type your numbers, one on each line.
  3. Press Calculate.
  4. Read the answer and check the working.
  5. Copy the result if you need it elsewhere.

What is a decimal?

The decimal system is a numeral system that uses ten as its base, and it's the global standard for writing both whole and non-whole numbers. A decimal point, or decimal separator, marks the place where the whole number ends and the fractional part begins. Each place to the right of the point is worth one-tenth of the place before it: tenths, hundredths, thousandths and so on.

How to add decimals by hand

  1. Write the numbers in a column, with the decimal points lined up.
  2. Fill empty places with zeros, so that every number has the same number of decimal places.
  3. Add each column, starting on the right and carrying as usual.
  4. Bring the decimal point straight down into your answer.

A worked example

Let's add 12.5, 3.75 and 0.125. Write them out with three decimal places each.

Number
12.500
+3.750
+0.125
Total16.375

Enter these three numbers and the calculator shows 16.375, with the same layout in the working.

Rules for each operation

OperationRuleExample
AddLine up the points and add1.2 + 3.45 = 4.65
SubtractLine up the points and subtract5.25 − 1.5 = 3.75
MultiplyIgnore the points, multiply, then count the decimal places1.5 × 0.2 = 0.3
DivideMove the point in both numbers until the divisor is whole7.5 ÷ 2.5 = 3

Multiplying decimals

You don't need to line up the decimal points when you multiply. Ignore them and multiply as if they were whole numbers. Then count the total number of decimal places in the numbers you started with, and put the same number of decimal places in your answer. For 1.5 × 0.2, multiply 15 by 2 to get 30. There are two decimal places in total, so the answer is 0.30, which is 0.3.

Dividing decimals

The easiest method is to make the number that you're dividing by into a whole number. Move its decimal point to the right as many places as needed, and then move the point in the other number the same number of places. So 7.5 ÷ 2.5 becomes 75 ÷ 25, which is 3. Some divisions never end, such as 1 ÷ 3. In those cases, this calculator rounds the result to 12 decimal places, and the table tells you that it has done so.

Why does 0.1 + 0.2 sometimes go wrong?

Most computers store numbers in binary, and many decimal fractions can't be represented exactly that way. That's why a basic program may say that 0.1 + 0.2 is 0.30000000000000004. Those tiny errors rarely matter in everyday life, but they're annoying and they can cause problems when you're adding up money or checking homework. This tool avoids the problem by treating every number as an exact decimal.

Where you'll use this

  • Homework, to check your answers and your layout.
  • Shopping and bills, to add up a list of prices.
  • Measurements, such as adding lengths of wood or fabric.
  • Accounts, where a total needs to be exact.
  • Science, to combine readings.

Estimating to check your answer

A quick estimate catches most mistakes. Before you add, round each number to the nearest whole number and add those instead. With 12.5, 3.75 and 0.125, you'd think of about 13, 4 and 0, which comes to around 17. The true answer of 16.375 is close, so it's probably right. If your answer were 163.75 or 1.6375, you'd know straight away that a decimal point had moved to the wrong place. This habit is useful for homework and for checking a bill at a store, as it only takes a few seconds and doesn't need any tools at all.

Understanding place value

Each digit in a decimal has a value that depends on its position. In the number 3.75, the 3 means three ones, the 7 means seven tenths and the 5 means five hundredths. That's why you must add tenths to tenths and hundredths to hundredths, and it's the reason for lining up the points. Adding zeros to the end of the fractional part doesn't change the value of the number, so 3.75 and 3.750 are the same. It simply makes the columns easier to read. Zeros at the front of the number make no difference either.

Common mistakes

  • Lining up the last digits instead of the decimal points.
  • Forgetting that a whole number has a point, as 7 is the same as 7.0.
  • Miscounting the places when you multiply.
  • Using a comma as the decimal point. Here, commas are treated as thousands separators.

Work with parts of a whole using the fraction calculator, switch between forms with the fraction to decimal converter, and handle very large values with the scientific notation calculator.

What next

Use this often? Add Add Decimals to your Home screen.

Frequently asked questions

How does the add decimals calculator work?

It treats each number as an exact decimal, lines up the decimal points and adds them.

Can it subtract, multiply or divide decimals?

Yes. Choose the operation above your numbers.

How many numbers can I add?

Up to 200 at a time.

Why does it show exactly 0.3 for 0.1 + 0.2?

It uses exact decimal math, so it doesn't pick up binary rounding errors.

Is division always exact?

Not always. Results that never end are rounded to 12 decimal places.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Math Tools