A windsock calculator estimates the speed of the wind from the number of segments of a windsock that are standing out straight. Choose the number of segments, from one to five, and the calculator gives the wind speed in knots, kilometres per hour, miles per hour and metres per second. It uses the stripe rule of thumb for windsocks, which is only a rough approximation.[1] It runs in your browser and nothing you enter is sent anywhere.
How to use the windsock calculator
- Look at the windsock and count the segments that are standing out straight.
- Choose that number.
- Press Estimate the wind.
- Read the speed in the unit you like.
The rule
The rule is that the wind speed in knots is 3 times the number of segments, since each stripe that is extended adds 3 knots.[1] With three segments out, the wind is about 9 knots. The same speeds in other units are as follows, with one segment meaning 3 knots or less, which is about 5.6 kilometres per hour, 3.5 miles per hour or 1.5 metres per second. Two segments mean 6 knots, which is 11.1 kilometres per hour, 6.9 miles per hour or 3.1 metres per second. Three segments give 9 knots, 16.7 kilometres per hour, 10.4 miles per hour and 4.6 metres per second. Four segments give 12 knots, 22.2 kilometres per hour, 13.8 miles per hour and 6.2 metres per second. Five segments mean 15 knots or more, which is 27.8 kilometres per hour, 17.3 miles per hour or 7.7 metres per second.
The units
A knot is one nautical mile per hour, which is exactly 1.852 kilometres per hour.[2] The calculator changes the speed in knots into kilometres per hour by multiplying by 1.852, into miles per hour by multiplying by 1.1508 and into metres per second by multiplying by 0.5144. The factors are rounded, and they give the values listed above.
The windsock it is meant for
The rule is meant for a standard airport windsock, which the international aviation rules say should be at least 3.6 metres long and 0.9 metres across at the large end.[1] A smaller windsock, such as a garden one, or one that is mounted differently, needs calibration, which could be done with a straight-line fit to measured speeds, though no details are given here.
The range of the estimate
The rule works for winds of about 3 to 15 knots, since a standard windsock lifts in a breeze of at least 3 knots and is fully extended in a wind of 15 knots.[1] Transport Canada gives other points on the curve, with a 10-knot wind raising the sock to 5 degrees below horizontal and a 6-knot wind to 30 degrees below horizontal.[1] With a wind slower than 3 knots, the windsock hangs down and the speed is not resolved. With a wind of 15 knots or more, the windsock is fully extended, so it shows only that the wind is at least that speed. In every case the direction of the wind is still shown by the way the sock points, which is its main use.
How a windsock works
A windsock is a cone of cloth, open at both ends, that is mounted so that it can turn freely. The wind enters the wide end and pushes the cone out, and the narrow end points downwind. A stronger wind lifts more of the cone to the horizontal. The speed is read from the angle of the sock to the pole, and no simple formula links that angle to the speed, so the estimate is based on the segments, which are marked by the alternating orange and white stripes.[1]
Reading the result
The calculator shows the wind speed in knots, kilometres per hour, miles per hour and metres per second, with a note when you choose one segment or five, since the speed is then a limit, not a value. Knots are used in aviation and at sea, kilometres per hour on most weather reports in Europe, and miles per hour in the United States, so the four units let you compare with any report you have.
Using a windsock in practice
Pilots look at a windsock to see the wind direction and strength near the runway, before takeoff and landing. The sock points away from the wind, so if it points to the north, the wind is coming from the south. Because the direction of a windsock can be seen from a distance, it is also used at some chemical plants, on bridges and in sports fields. For measuring the wind accurately, an anemometer is the proper instrument, and a windsock gives only a quick visual guide.
Calibrating your own
If you have a windsock that is not of the airport type, you can calibrate it by comparing its segments with the measured wind speed on several days, and fitting a straight line through the points. The calculator does not do this, but you can make your own table by noting how many segments stand out at the times when a weather station nearby reports different speeds. Keep the same windsock and the same mast for the readings.
Common mistakes
- Counting segments that are only partly out. Count the ones that stand out straight.
- Using the estimate for a small windsock. It needs calibration.
- Taking it as exact. It is a rough approximation.
- Forgetting the limits. It is valid between about 3 and 15 knots.
What next
Use this often? Add Windsock to your Home screen.
Frequently asked questions
What is a windsock calculator?
A tool that estimates the wind speed from the number of windsock segments standing out straight.
How do you estimate wind speed from a windsock?
Wind speed in knots is about 3 times the number of segments, because each stripe extended adds 3 knots.
How fast is the wind if three segments are out?
About 9 knots, which is 16.7 km/h or 10.4 mph.
What windsock does the rule apply to?
A standard airport windsock, at least 3.6 m long and 0.9 m across at the large end.
What is the range of the estimate?
About 3 to 15 knots. Below 3 knots it hangs down, and above 15 it is fully extended.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.