Saved

Press the star next to a tool's name to save it.

All my tools

Water Cooling Calculator

Use this water cooling calculator to estimate how long a cup of hot water takes to cool to the temperature you want, using Newton's law of cooling.

Restored your last values ·

mL
cm

Enter the starting temperature of the water, the temperature you want, the room temperature, the volume of water and the diameter of the cup's top. The calculator gives the time to cool, using Newton's law of cooling.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Fill in the temperatures, the volume and the diameter, then press Work out the cooling time.

See full result

A water cooling calculator estimates how long a cup of hot water takes to cool to the temperature that you want. Enter the starting temperature, the temperature to reach, the room temperature, the volume of water and the diameter of the cup's surface, and the calculator gives the time in minutes. It uses Newton's law of cooling, and it works in your browser.

How to use the water cooling calculator

  1. Choose Celsius or Fahrenheit.
  2. Enter the starting temperature of the water and the temperature that you want to reach.
  3. Enter the room temperature.
  4. Enter the volume of the water in milliliters and the diameter of the cup's top in centimeters.
  5. Press Work out the cooling time.

Newton's law of cooling

The calculator uses Newton's law of cooling, which says that a warm object loses heat at a rate that is proportional to the difference between its temperature and that of its surroundings. As a result, the water cools quickly at first, when it is much warmer than the room, and more slowly as it gets closer. The temperature difference decays exponentially with time, so the time to cool from a starting temperature to a target is minus the natural logarithm of the ratio of the two temperature differences, divided by a cooling constant, k. [1]

The cooling constant

The cooling constant equals the heat transfer coefficient times the surface area, divided by the heat capacity. [1] The calculator uses a fixed heat transfer coefficient of 284.16 watts per square meter per kelvin, which is our own assumption for an open cup, since real values depend on the cup and the air. The surface is the open top of the cup, and the heat capacity of the water comes from its specific heat of 4,200 joules per kilogram per kelvin, its density of 973 kilograms per cubic meter and its volume. Those figures are close to reference values of 4,184 joules per kilogram per kelvin at 20 degrees Celsius, and a density that falls from about 997 kilograms per cubic meter at 25 degrees to about 962 at 95 degrees. [2] A bigger surface lets the water lose heat faster, and a larger volume slows it.

A worked example

For a cup with a diameter of 8 centimeters, which has a surface area of 0.005027 square meters, holding 400 milliliters of water, the heat capacity is 1,634.64 joules per kelvin and the cooling constant is about 0.0008738 per second. Water at 90 degrees Celsius in a room at 20 degrees cools to 21 degrees in about 4,862 seconds, which is about 81 minutes. A second example, with 300 milliliters in the same cup in a room at 24.6 degrees, gives a constant of about 0.001165 and a time of about 223 seconds to cool from 90 to 75 degrees. The calculator reproduces both.

Why you cannot reach the room temperature

The target must be above the room temperature. In the formula, which is the solution of Newton's law, [1] the water gets closer and closer to the room temperature but never reaches it in finite time, so asking for the time to reach the room temperature itself gives no answer. If you want to know when your tea is cool enough to drink, choose a target a degree or two above the room temperature, or a comfortable drinking temperature such as 60 degrees Celsius.

Adjusting the estimate

A cup with a lid loses heat more slowly, a thick ceramic mug acts as an insulator, and a thin metal mug loses heat faster. Stirring or blowing on the surface speeds the cooling, as does a draft. The calculator assumes an open, uncovered cup of still water, so use it as a starting point. If you want to speed the cooling, you can add cold water, which brings the mixture to a lower temperature at once.

Tips

  • Measure the diameter across the top of the cup, where the water meets the air.
  • Use the volume of water, not the volume of the cup.
  • Choose a target above the room temperature.
  • Check the real temperature with a thermometer for anything where safety matters, such as baby bottles.

Cooling a drink faster

The calculation shows how the main factors work. A wider cup lets more heat escape, so pour the drink into a wide, shallow bowl to cool it faster. A smaller volume cools faster than a larger one, so pour a small amount at a time. A colder room speeds up the cooling, and so does moving air. If you want to cool a hot drink very quickly, mix in some cold liquid. The final temperature of the mixture is the average of the two temperatures weighted by their masses, which is our own working from the conservation of heat.

Keeping a drink warm

The same law explains why a lid and an insulated bottle keep a drink warm for longer. The lid cuts the loss from the surface, and the insulation cuts the heat transfer through the sides. In the calculation, you can imitate a smaller opening by entering a smaller diameter, which lengthens the cooling time. This is a rough way to see the effect, and a real thermos does far better than the formula suggests.

Other uses of Newton's law

The same type of formula is used for many cooling and heating problems, such as a cup of coffee, a cooked dish left on a counter, or a warm room in winter. In each case the temperature approaches that of the surroundings in a curve. If you know the time that an object takes to cool by a given amount, you can estimate the cooling constant, and then predict other times.

Common mistakes

  • Using the cup's volume. Use the water's volume.
  • Mixing units. Milliliters and centimeters are used here.
  • Expecting the room temperature as a target. It can never be reached exactly.
  • Trusting it for safety. Use a thermometer.

What next

Use this often? Add Water Coolin to your Home screen.

Frequently asked questions

What is a water cooling calculator?

A tool that estimates how long a cup of hot water takes to cool to a chosen temperature.

How is the cooling time calculated?

With Newton's law of cooling: time = minus the natural logarithm of the ratio of the temperature differences, divided by a cooling constant.

How long does water take to cool from 90 to 21 degrees Celsius?

In a room at 20 degrees, about 81 minutes for 400 milliliters in a cup 8 centimeters across, in the worked example.

Why can't I choose the room temperature as my target?

The water approaches the room temperature without reaching it exactly, so the time is unlimited.

Is the estimate exact?

No. It is for an open cup of still water. A lid, a thick mug or a draft change the time.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Fun & Lifestyle Tools