Saved

Press the star next to a tool's name to save it.

All my tools

True Airspeed Calculator

Use this true airspeed calculator to convert indicated airspeed to true airspeed from the pressure altitude and outside air temperature, in knots or kilometres per hour.

Restored your last values ·

Choose US or metric units. Enter the indicated airspeed and the pressure altitude. Add the outside air temperature, or leave it blank to assume a standard day. You get the true airspeed.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the indicated airspeed and the altitude, then press Calculate.

See full result

A true airspeed calculator converts the indicated airspeed that you read on the instrument into the true speed of the aircraft through the air. The higher the altitude, the thinner the air, and the faster the true speed is for the same indication. Enter the indicated speed, the altitude and, if you know it, the outside temperature.

How to use the true airspeed calculator

  1. Choose US or metric units.
  2. Enter the indicated airspeed and the pressure altitude.
  3. Enter the outside air temperature, or leave it blank for a standard day.
  4. Press Calculate.

Indicated and true airspeed

An airspeed indicator measures a pressure difference, which depends on the density of the air as well as the speed. At sea level in standard air, indicated speed and true speed agree. Higher up, the same pressure difference corresponds to a larger speed. The page states that equivalent airspeed, EAS, is the same as calibrated airspeed and true airspeed at standard sea level [3], and that EAS is calibrated airspeed corrected for the compressibility of air [3].

The density formula

True airspeed equals equivalent airspeed times the square root of the ratio of sea-level density to the actual density: TAS = EAS × √(ρ₀ ÷ ρ). This is the page's low-speed relation, with ρ₀ the density at sea level in the International Standard Atmosphere and ρ the density of the air in which the aircraft is flying [1]. The formula as printed was garbled in our reading, so we use the standard form of it.

The standard atmosphere

The International Standard Atmosphere, ISA, has a sea-level temperature of 15 degrees Celsius, a pressure of 101,325 pascals and a density of 1.2250 kilograms per cubic metre [2]. Its temperature falls by 6.5 degrees per kilometre in the troposphere [2], and the table runs to 11,000 metres, or 36,089 feet [2]. Above that, the temperature is constant, which is why the calculator stops at 11,000 metres.

Density from altitude and temperature

The density ratio is the pressure ratio divided by the temperature ratio, ρ ÷ ρ₀ = (p ÷ p₀) ÷ (T ÷ T₀), from the ideal gas law. The pressure ratio at the altitude comes from the standard lapse rate, p ÷ p₀ = (T_ISA ÷ T₀) raised to the power 5.25588, a barometric formula that we derived with standard gravity and the gas constant of dry air, 287.0528 joules per kilogram kelvin, which the page gives [2]. This working is our own.

The page's example

The page says that an aircraft with an indicated airspeed of 100 knots at 15,000 feet in the standard atmosphere is actually flying at 126 knots, or 233 kilometres per hour, true airspeed [1]. Our calculator gives 126.1 knots, with a density ratio of 0.6292 and a density of 0.7708 kilograms per cubic metre. In metric mode, 185.2 kilometres per hour at 4,572 metres gives 233.5.

The effect of temperature

On a warm day the air is thinner than standard, and the true airspeed is higher. On a cold day it is lower. Enter the outside air temperature to include this. For example, at 15,000 feet a temperature 10 degrees above standard adds about 1.9 percent to the true airspeed. The calculator shows how many kelvin above or below ISA your temperature is, so you can see the deviation at once.

The 2 percent rule

The page gives a rule of thumb that the indicated speed reads about 2 percent less than true speed per 1,000 feet [1]. The calculator prints what that rule would give, compounding the 2 percent for each thousand feet. At 15,000 feet it gives 134.6 knots, which is too high. The rule is only a rough guide, and the density method is better, which the page notes with its own 126 knot example.

What the tool leaves out

We treat the indicated airspeed as equivalent airspeed. That ignores the instrument and position error and the compressibility correction, which grows with speed and altitude. For slow aircraft it is small. At high speed, the page gives other relations that use the Mach number and the temperature, which this calculator does not use. A pilot must use the approved performance tables and the aircraft's own instruments.

Units

In US mode the speed is in knots, the altitude in feet and the temperature in degrees Fahrenheit. In metric mode, the speed is in kilometres per hour, the altitude in metres and the temperature in degrees Celsius. The altitude is taken as the pressure altitude, and the calculator treats it as the geopotential height of the standard atmosphere. The result is in the same speed unit as the input.

Using the calculator

Enter the indicated airspeed and the pressure altitude, and add the temperature if you have it. Read the true airspeed and the ratio to the indicated speed. Try 0, 5,000, 10,000 and 15,000 feet to see how the ratio rises. Remember that this is an educational estimate. Flight planning should always use official charts, the flight computer and the pilot's operating handbook.

Common mistakes

  • Using the altitude shown on the ground map instead of pressure altitude. Use the altimeter set to 1013 hPa.
  • Entering the temperature in the wrong unit. Check °F or °C.
  • Treating the result as ground speed. Wind is not included.
  • Using the tool above 36,089 feet. It stops at the tropopause.

What next

Use this often? Add True Airspee to your Home screen.

Frequently asked questions

What is a true airspeed calculator?

A tool that converts indicated airspeed into the aircraft's real speed through the air.

What is the true airspeed formula?

TAS = EAS × √(ρ₀ ÷ ρ), the equivalent airspeed times the root of the density ratio.

Why is true airspeed higher than indicated?

The air is thinner at altitude, so the same pressure reading means a faster speed.

Does it include wind?

No. True airspeed is the speed through the air, not over the ground.

What is the altitude limit of the calculator?

36,089 feet, the top of the ISA troposphere.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters