Saved

Press the star next to a tool's name to save it.

All my tools

Trigonometry Table

Use this trigonometry table to look up sine, cosine, tangent, cotangent, secant and cosecant, with exact values for standard angles and four-decimal values from 0° to 360° at the interval you choose.

The table is worked out in your browser.

Values

A trigonometry table lists the values of the main trigonometric functions for a set of angles. Students use one for homework and exams, and builders and engineers use one to check a calculation quickly. This trigonometry table starts with the exact values for the standard angles of 0°, 30°, 45°, 60° and 90°, written with square roots just as they are in a textbook. Switch to 0° to 90° or 0° to 360° to see four-decimal values at an interval of 1°, 5°, 10° or 15°. It includes sine, cosine, tangent, cotangent, secant and cosecant, and it's marked clearly where a value is undefined.

How to use the trigonometry table

  1. Start with the standard angles to see exact values.
  2. Switch the range to 0° to 90° or 0° to 360° for decimals.
  3. Choose an interval for how many rows you'd like.
  4. Find your angle in the first column.
  5. Read across to find the function that you need.

What are the six trigonometric functions?

In a right triangle, each function is a ratio of two sides. Three of them are the main ratios, and the other three are their reciprocals.

FunctionRatioEqual to
Sine (sin)Opposite ÷ hypotenuse1 ÷ csc
Cosine (cos)Adjacent ÷ hypotenuse1 ÷ sec
Tangent (tan)Opposite ÷ adjacentsin ÷ cos
Cotangent (cot)Adjacent ÷ oppositecos ÷ sin
Secant (sec)Hypotenuse ÷ adjacent1 ÷ cos
Cosecant (csc)Hypotenuse ÷ opposite1 ÷ sin

Exact values or decimals?

The values of trigonometric functions can be written approximately, as in cos 45° ≈ 0.707, or exactly, as in √2/2. Trigonometric tables contain many approximate values, but the values at certain angles can be expressed exactly by using arithmetic and square roots. Exact forms are what you'll usually need in an exam. Decimals are better when you're measuring something real, or when you need to work out a final figure.

An easy way to remember the standard angles

There's a handy pattern for sine. Write down the numbers 0, 1, 2, 3 and 4 for the angles 0°, 30°, 45°, 60° and 90°. Take the square root of each and divide by 2. That gives 0, 1/2, √2/2, √3/2 and 1. Cosine is the same list in reverse. Once you have sine and cosine, you can work out all of the others, since tangent is simply sine divided by cosine.

A worked example

A ladder is leaning against a wall at an angle of 60° to the ground, and it's 10 feet long. How high up the wall does it reach? The height is opposite the angle, and the ladder is the hypotenuse, so you need the sine. From the table, sin 60° is √3/2, or about 0.8660. Multiply by the length: 0.8660 × 10 = 8.66 feet. To find how far the base is from the wall, use the cosine: cos 60° = 1/2, so the distance is 5 feet.

Why are some values undefined?

Each ratio is a division, and you can't divide by zero. Tangent is sine divided by cosine, and the cosine of 90° is 0, so tan 90° is undefined. The same is true for sec 90°. In the other direction, the sine of 0° is 0, so cot 0° and csc 0° are also undefined. The table labels these entries as Undefined so that you won't mistake them for a very large number.

Angles above 90°

The functions repeat in a regular way. Each angle beyond 90° has a reference angle in the first quadrant, with the same size of value, and only the sign changes.

  • 0° to 90°: all of the functions are positive.
  • 90° to 180°: only sine and cosecant are positive.
  • 180° to 270°: only tangent and cotangent are positive.
  • 270° to 360°: only cosine and secant are positive.

For example, sin 150° is the same as sin 30°, which is 0.5. And cos 150° is the negative of cos 30°, which is about −0.8660.

Degrees and radians

This table uses degrees. Many formulas in higher mathematics use radians, where a full turn is 2π. To convert, multiply the degrees by π and divide by 180. So 30° is π/6, 45° is π/4, 60° is π/3 and 90° is π/2. If you enter a value on a calculator and get a surprising answer, check that it's in the correct mode.

Using the table for right triangles

To choose the right function, start by labeling the triangle. The hypotenuse is the longest side, opposite the right angle. The opposite side is across from your angle, and the adjacent side is next to it. Many students remember the three main ratios with the phrase SOH CAH TOA: sine is opposite over hypotenuse, cosine is adjacent over hypotenuse, and tangent is opposite over adjacent. If you know one side and one angle, look up the ratio that connects the side you know with the side you want, then multiply or divide. For example, a ramp that rises at 5° over a horizontal run of 20 feet climbs 20 × tan 5°, which is about 20 × 0.0875, or 1.75 feet.

Useful identities to check your work

A few simple relationships let you confirm any row of the table. For any angle, the square of the sine plus the square of the cosine equals 1. Tangent equals sine divided by cosine. The sine of an angle also equals the cosine of its complement, so sin 20° is the same as cos 70°. Look at the two rows in the table and you'll see the values match.

Common mistakes

  • Mixing up sine and cosine for 30° and 60°. They're swapped.
  • Using the wrong calculator mode. Check degrees and radians.
  • Treating undefined as zero. They aren't the same.

Solve for any angle with the trigonometry calculator, work out lengths with the area and perimeter calculator, and calculate matrices with the determinant calculator.

What next

Use this often? Add Trigonometry to your Home screen.

Frequently asked questions

What is a trigonometry table?

It's a list of values of sine, cosine, tangent and related functions for a set of angles.

What is the value of sin 30?

Sin 30° is exactly 1/2.

Why is tan 90 undefined?

The cosine of 90° is 0, and you can't divide by zero.

Does it go above 90 degrees?

Yes. Choose 0° to 360° to see every quadrant.

Are the decimals exact?

No. They're rounded to four places, so use the standard angles view for exact forms.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Math Tools