How to use this time tracker
- Name your task. You can leave it blank, too.
- Press Start. The timer keeps running if you close the page or switch tabs.
- Press Stop when you finish. The time goes into your log.
- Copy or download your log, and open the CSV file in Excel or Google Sheets.
What you get
- Totals by task: tasks with the same name are added together.
- Total hours: a decimal figure that’s ready for a timesheet, so 1:30:00 is 1.5 hours.
- A CSV log: each entry has its start, end, time and hours.
How to convert time to decimal hours
Decimal hours = hours + minutes ÷ 60
For example, 2 hours 45 minutes is 2 + 45 ÷ 60 = 2.75 hours.
Where is my data kept?
Your log is saved in this browser on this device, and it isn’t sent to us or to Google. So it won’t appear on your other devices, and it will be lost if you clear your browser data. Download your CSV to keep a copy. It’s not a replacement for your employer’s official timekeeping.
To add up hours you’ve already worked, use our time calculator. To work out pay, use our payroll calculator.
Worked example: a morning of tracked tasks
Say you work on a report, stop to answer email, and then go back to the report. You type a name in the Task name box before each timer and press Start timer, then Stop timer when you switch.
| Entry | Time | Hours in the CSV |
|---|---|---|
| Report | 1:15:00 | 1.25 |
| 0:25:30 | 0.42 | |
| Report | 0:50:00 | 0.83 |
Because the two report entries share the same name, the result adds them together. It shows Report at 2:05:00 and Email at 0:25:30. The total time is 2:30:30, and the Total hours row shows 2.51, which is 2 hours and 30.5 minutes as a decimal.
Notice that the three CSV figures add up to 2.50, not 2.51. Each entry is rounded to two decimals on its own, while the total is worked out from the exact seconds first and rounded once. If you need the hours on a timesheet to match the tool, copy the Total hours figure rather than adding the rounded rows yourself.
How to read the time tracker result
- The big clock is the total time in your log, plus the timer that’s running now. It counts up every second while a timer runs.
- The “Now timing” line shows which task is running and how long it has run so far.
- Each log entry shows the task name, the date and time it started, and how long it lasted.
- The table lists the time per task in the order the tasks first appeared, then the total in decimal hours.
Use the arrows to reorder entries, and Remove to delete one. Reordering doesn’t change the totals.
Tracking hours for a job
A personal log is handy when you bill clients or want to see where your day goes. If you’re an employee in the US, though, your employer keeps the official record. Under federal law, employers must record the hours worked each day and the total hours worked each workweek.[1] The Department of Labor says employers may use any timekeeping method they choose, and any plan is fine as long as it’s complete and accurate.[1] Employers must keep payroll records for at least three years.[1]
So treat this log as your own notes. It can help you spot a missing shift on a pay stub, or show a client how long a job took.
How long your log is kept
The log uses your browser’s local storage. MDN Web Docs explains that local storage data has no expiration time, so the log stays until you clear it.[2] There’s one exception: in a private or incognito window, the data is cleared when the last private tab is closed.[2] Don’t track a full day in a private window, because the log will be gone when you close it. Download the CSV at the end of each week if the record matters to you.
Limits of this time tracker
- One timer at a time. Stop the current task before you start the next one.
- Times can’t be edited. If you forget to stop a timer, remove that entry and add a note to your CSV instead.
- The clock follows your device. Start and end times come from your computer’s or phone’s clock, so a wrong device time gives wrong start times.
- Up to 1,000 entries. When the log is full, download it, then press Clear all and carry on. Clear all asks you to confirm, because it can’t be undone.
Common mistakes
- Naming the same task two ways. “Report” and “report” are counted as two tasks. Use exactly the same name each time to get one total.
- Leaving a timer running overnight. The timer keeps going when you close the page, which is useful, but it also means a forgotten timer keeps counting.
To turn your hours into pay, enter the Total hours figure in the time card calculator. For focused work sessions, try the Pomodoro timer.
How this tool works
Press Start and the tool records the current time. Press Stop and it saves the task name with the start and end times. The running clock updates every second and is shown as hours, minutes and seconds.
Everything stays in your browser's local storage. Task names and times are never sent anywhere, and they remain after you close the page. The log holds up to 1,000 entries. A task you leave unnamed is saved under a default name.
- Time per task adds up all entries with the same name.
- Total hours = total milliseconds ÷ 3,600,000, shown to two decimals.
- You can reorder or delete entries.
- Download CSV saves task, start, end, time and hours. Names that a spreadsheet could read as a formula get a leading apostrophe.
What next
Use this often? Add Time Tracker to your Home screen.
Frequently asked questions
Does the timer keep running if I close the page?
Yes. It saves the start time in this browser, so when you come back, it shows the full time since you started. It needs the same browser on the same device.
Are my tasks uploaded?
No. Your log is saved in this browser only, and task names aren’t sent to us or to Google.
Can I open my log in Excel?
Yes. Press Download CSV, then open the file in Excel or Google Sheets.
How do I convert minutes to decimal hours?
Divide the minutes by 60. For example, 45 minutes is 0.75 hours.
Can I run two timers at once?
No. The time tracker runs one timer at a time. Stop the current task, then start the next one.
Why do the hours in my CSV add up to a little less than the total?
Each CSV row is rounded to two decimals on its own, while the Total hours figure is worked out from the exact time and rounded once. Use the total for timesheets.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.