A standard deviation index calculator shows how far a laboratory's mean result is from the mean of a consensus group, measured in standard deviations of that group. Enter the three numbers, and the calculator gives the index and says what the size of it means.
How to use the standard deviation index calculator
- Enter the laboratory mean.
- Enter the consensus group mean.
- Enter the consensus group standard deviation, which must be more than 0.
- Press Calculate.
The formula
The standard deviation index, SDI, is the laboratory mean minus the consensus group mean, divided by the standard deviation of the consensus group. It has the same form as a standard score, which divides the difference from a mean by a standard deviation [1]. Written out: SDI = (laboratory mean − consensus mean) ÷ consensus standard deviation. The three values must use the same unit, and the standard deviation must be above zero, because you cannot divide by zero. The result has no unit. It counts how many group standard deviations separate the two means.
A worked example
With a laboratory mean of 9, a consensus mean of 8 and a consensus standard deviation of 2, the difference is 1, and 1 divided by 2 is 0.5. The calculator says that an SDI of 0.5 is in the band above 0 up to 1, which it describes as less bias.
The bands
The calculator labels the size of the index with bands. An SDI of 0 means no bias. Above 0 up to 1 means less bias. From above 1 up to 1.25 is within the acceptable limit. From 1.25 up to 1.5 is possibly acceptable and should be examined. From 1.5 up to 2 is marginal and indicates bias. An SDI of 2 or more is unacceptable and needs remedial action. These bands are this tool's own planning limits.
Negative values
The bands are written for positive values. A negative SDI means that the laboratory mean is below the consensus mean. We apply the same bands to the size of the index, without its sign, and we show the sign in the result so you can tell the direction. This is our own working. An SDI of −1.5, for example, is in the marginal band, and the laboratory is below the group.
Boundaries between the bands
Written as ranges, the bands could leave small gaps, such as 1.25 to 1.49 and 1.50 to 1.99. We close them with less-than limits: up to and including 1.25 is within the acceptable limit, above 1.25 and below 1.5 is possibly acceptable, 1.5 up to but not including 2 is marginal, and 2 or more is unacceptable. That is our own choice.
The consensus group
The consensus group mean plays the part of the population mean, and its standard deviation that of the population standard deviation [1]. In practice this is the mean of the peer laboratories, or of the participants of a comparison scheme, and the standard deviation is the spread of their results. The index tells you how your own mean compares with that spread. A laboratory that sits one group standard deviation above the mean has an SDI of 1, whatever the units of measurement are.
The same shape as a z-score
The index looks like a z-score, which is a value minus a mean, divided by a standard deviation. The difference lies in what the numbers are. Here the value is a laboratory's mean and the mean and spread belong to the consensus group. The arithmetic is the same as for a z-score, but this calculator also names the band and shows the direction of the bias. This comparison is our own.
Choosing the units
Use the same unit for all three inputs, whether it is milligrams per litre, a percentage or a count. If one value is in another unit, convert it first. The SDI itself has no unit, so you can compare indexes of different tests. The difference in the result line is in the unit you used, which helps you judge how large the gap is in practical terms as well as in standard deviations.
A note on the limits
The limits of the bands in this calculator are the tool's own planning limits. We did not find a single published standard that fixes them, so we credit them to no source. If your scheme sets its own limits, use them. The calculator is a quick check, not an accreditation tool.
Not the Simpson index
The letters SDI can also stand for other indexes. This calculator is for the standard deviation index of a laboratory against a consensus group. It is not the Simpson diversity index of ecology, and it is not a standard deviation calculator for a list of numbers. For a list of values, use the standard deviation calculator on this site, and then enter the results here if you need the index.
Common mistakes
- Using the laboratory's own standard deviation. The divisor is the consensus group's.
- Mixing units. Use one unit for all three values.
- Ignoring the sign. The sign shows whether the laboratory is high or low.
- Treating the bands as a standard. They are this tool's own limits.
What next
Use this often? Add Standard Dev to your Home screen.
Frequently asked questions
What is a standard deviation index calculator?
A tool that divides the difference between a laboratory mean and a consensus mean by the consensus standard deviation, and names the band of the result.
What is the SDI formula?
SDI = (laboratory mean − consensus mean) ÷ consensus standard deviation.
What does an SDI of 2 or more mean?
In this calculator it is unacceptable and calls for remedial action.
Can the SDI be negative?
Yes. A negative value means the laboratory mean is below the consensus mean. The bands apply to its size.
Is the SDI the same as a z-score?
It has the same form, with the laboratory mean as the value and the consensus group's mean and spread.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.