Saved

Press the star next to a tool's name to save it.

All my tools

Sphere Density Calculator

Use this sphere density calculator to find the density of a ball from its mass and its radius or diameter, using V = (4/3)πr³, in US or metric units.

Restored your last values ·

Choose US or metric units and whether you know the radius or the diameter. Enter the size and the mass of a solid sphere. You get its density and its volume.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the size and the mass of the sphere, then press Calculate.

See full result

A sphere density calculator finds the density of a solid ball from its mass and its radius or diameter. It works out the volume with V = (4/3) π r³ and divides the mass by it. The answer is given in several units, so you can compare it with a table of materials.

How to use the sphere density calculator

  1. Choose US or metric units.
  2. Say whether you know the radius or the diameter.
  3. Enter the size and the mass.
  4. Press Calculate.

The formula

Density is the ratio of mass to volume, ρ = m ÷ V [1]. For a sphere the volume is V = (4/3) π r³ [2], and putting the two together gives ρ = m ÷ ((4/3) π r³). Here m is the mass and r is the radius. If you know the diameter, the calculator halves it first, since r = d ÷ 2 [2].

A worked example

Take a sphere with a radius of 3 inches and a mass of 0.5 pounds. The volume is (4/3) × π × 27, which is 113.1 cubic inches, and the density is 0.5 ÷ 113.1, about 0.004421 pounds per cubic inch. Enter 3 and 0.5 in US mode and the calculator gives the same result.

Other units for the same answer

The same result is 7.639 pounds per cubic foot, since there are 1,728 cubic inches in a cubic foot, which is our own conversion. It is also 0.1224 grams per cubic centimetre or 122.4 kilograms per cubic metre. The calculator shows all four, with the unit of your choice first. Compare it with a handbook value to guess what a ball is made of.

A metric example

Here is a metric example of our own. A ball with a diameter of 6 centimetres and a mass of 100 grams has a radius of 3 centimetres and a volume of 113.1 cubic centimetres. Its density is 100 ÷ 113.1, which is 0.884 grams per cubic centimetre, or 884 kilograms per cubic metre. A ball of that value would be lighter than the denser metals and heavier than most foams.

Consistent units

All inputs must be in consistent units. If the radius is in centimetres, the density will be in terms of centimetres too. The calculator handles this for you: it converts the inputs to metres and kilograms, then to the display units. You only have to pick US or metric and enter the numbers in the units that are named beside each box.

Radius or diameter

A frequent source of error is the diameter being typed where the radius is asked for. Since the volume goes with the cube of the radius, doubling the radius makes the volume eight times larger, and the density eight times smaller. The calculator has a switch for the length you know, so it will not make that mistake for you. Check the label before you press the button.

Hollow and layered spheres

The formula gives the average density of the whole ball. For a hollow ball, a ball with a core or a shell, or a foam, the result is the effective density of the object and not the density of any one material. It is a useful number for buoyancy and weight comparisons. To find the density of a shell material, you would need its wall thickness and the volume of the cavity.

Weighing and measuring

The accuracy of the answer depends on how well you measure the size and the mass. An error of 1 per cent in the radius gives about 3 per cent in the volume and therefore in the density. Use a caliper for the diameter, and weigh the ball on a scale that suits its mass. Average several readings of the diameter around the ball, as few balls are perfect.

Density links mass and volume, so if you know the density and the radius, you can rearrange the formula to find the mass. This site has a general density calculator, a sphere calculator for its surface area and volume, and a density converter for the units. For a half ball, a separate page gives the volume of a hemisphere.

Reading the result

Once you have the density, compare it with the value of the material you think the ball is made of. A value near 1,000 kilograms per cubic metre is close to water, so the ball would just float or sink. A value of several thousand is typical of metals. The calculator does not hold a table of materials, so look up a trusted handbook for the exact figure of a given metal or plastic.

Mass from density

You can also turn the formula around. If you know the density and the radius, the mass is ρ × (4/3) π r³. Likewise the radius is the cube root of 3m ÷ (4πρ). The calculator finds the density only, but these rearrangements follow directly from the formula and are handy for checking a result by hand.

Why the cube matters

Because the volume is proportional to r³, a ball that is twice as wide has eight times the volume. A pair of balls of the same material and different sizes therefore have the same density, but the mass grows with the cube of the radius. If two balls of different size have the same mass, the larger one must have a lower density, and the ratio of the densities is the inverse of the ratio of the volumes.

Common mistakes

  • Typing the diameter as the radius. Use the switch.
  • Mixing pounds with centimetres. Use one unit system.
  • Using it for a hollow ball. You get the average density.
  • Rounding the radius early. A small error is cubed.

What next

Use this often? Add Sphere Densi to your Home screen.

Frequently asked questions

What is a sphere density calculator?

A tool that finds the density of a solid ball from its mass and size.

What is the formula for the density of a sphere?

ρ = m ÷ ((4/3) π r³), the mass divided by the volume of the sphere.

How do I find the density from the diameter?

Halve the diameter to get the radius, or choose Diameter in the calculator.

What is the density of a sphere of radius 3 in and mass 0.5 lb?

About 0.004421 pounds per cubic inch, from a volume of 113.1 cubic inches.

Does the calculator work for a hollow ball?

It gives the average density of the whole object, not of its material.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Math Tools