A speed reading trainer shows words one at a time so you can practise reading at a set pace. This free speed reading trainer lets you paste any text, pick a speed from 100 to 1,000 words per minute and read it in a fixed spot on the screen.
The method is called rapid serial visual presentation, or RSVP: words or short groups appear one at a time in the same place, so your eyes do not need to move across the line. [2]
How to use the speed reading trainer
- Paste a text you want to read.
- Choose a speed in words per minute.
- Choose how many words to show at a time: 1, 2 or 3.
- Press Start and read. Press Pause to stop, or Restart to begin again.
When the text ends, you see how many words you read, how long it took and your average speed, including the extra pauses at punctuation. For single words, the red letter marks a point a little before the middle of the word to help your eye settle. This marker is our own design choice.
Choosing a speed
The right speed depends on the text and on you. Normal reading for comprehension is often given as about 200 to 230 words per minute, and proficient readers can reach about 280 to 350 without losing comprehension. [1]
| Speed | Use |
|---|---|
| 200 – 250 wpm | Normal reading, a good start |
| 300 – 400 wpm | Familiar, easy texts |
| 500 – 700 wpm | Skimming practice |
| 700+ wpm | Overview only, lower understanding |
Our own working: start about 50 words per minute above your comfortable speed and raise it in steps of 25 once it feels easy.
Words at a time and punctuation pauses
Showing two or three words at once lets you read phrases instead of single words, which is closer to how you normally read. Each group lasts as long as its words would at your speed. With pauses on, a group ending in a full stop, question mark or exclamation mark stays twice as long, and a comma, semicolon or colon stays one and a half times as long. These multipliers are our own choice.
What research says about speed reading
Researchers find no shortcut that gives much faster reading without a loss of understanding, apart from practice and a bigger vocabulary. [1] Comprehension is reported to fall sharply once speed goes beyond roughly 400 to 500 words per minute, although that claim is flagged as unverified. [1]
Studies of RSVP-style readers show mixed results: measured speed can rise, but several experiments found poorer literal comprehension and more visual fatigue at high rates. [2] RSVP also removes the preview of upcoming words and makes it hard to look back at something you missed. [2]
Using the trainer wisely
- Use it for skimming and practice, not for dense technical texts that need careful reading.
- After each session, write down the main points from memory to check what you took in.
- Increase the speed gradually and go back down when you notice you are missing meaning.
- Take breaks. Reading short pieces at speed can tire your eyes.
Studies suggest skimming a whole text can give a better grasp of the main points than reading only half of it normally, which is where this practice fits best. [1]
Build the habit
Ten minutes a day on texts of your own choice is more useful than one long session. Mix speeds: a slow, careful read of important passages and a faster pass over lighter ones. Measure your speed on the same type of text each week so you can see real progress, and compare it with your comprehension, not only with the number.
Privacy
The trainer runs entirely in your browser. The text you paste is not uploaded or saved. Up to 20,000 words are used from a long text.
Examples of how timing works
At 300 words per minute each word is on screen for 200 milliseconds, which is 60,000 divided by 300. At 600 words per minute it is 100 milliseconds. A two-word group at 300 words per minute stays for 400 milliseconds. Our own working: these are the base times, and the optional pauses add to them at the end of a phrase or sentence.
Troubleshooting
If the words seem too fast to follow, lower the speed or show two or three words at a time. If you lose your place, pause and restart from the beginning. If nothing starts, check that the text box is not empty. Long texts are cut at 20,000 words to keep the page fast.
Not a substitute for study reading
Reading to learn usually needs re-reading, note taking and pauses to think. This trainer is for practice and for getting through easy material at a steady pace.
Choosing practice texts
Pick material that matches your goal. For skimming practice use news articles or long emails. For comprehension practice use a chapter you must understand, and slow the speed until you can explain the main idea afterwards. Using texts in your own language and on a subject you already know makes it easier to follow, so you can tell whether the speed or the content causes any difficulty.
What next
Use this often? Add Speed Readin to your Home screen.
Frequently asked questions
What is a speed reading trainer?
It shows a text one word or short group at a time at a speed you choose, so you can practise reading at a set pace.
What speed should I start with?
Try about 250 to 300 words per minute and increase in small steps. Many people read for comprehension at around 200 to 230 words per minute.
Does speed reading hurt comprehension?
It can. Research finds no easy way to read much faster without losing understanding, and RSVP studies show reduced comprehension at high speeds.
What does RSVP mean?
RSVP stands for rapid serial visual presentation: words appear one after another in the same place on the screen.
Is my text saved or uploaded?
No. The text stays in your browser and is not stored or sent anywhere.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.