A sourdough calculator works out how much flour, water, starter and salt go into a loaf, using baker's percentages. Enter the total flour, the hydration you want, how much starter to use and how wet your starter is, and the calculator tells you how much flour and water to add. It counts the flour and water inside the starter, so the dough comes out at the hydration you chose. It runs in your browser and nothing is sent anywhere.
Baker's percentages
Wikipedia explains that baker's percentage, also called baker's math, gives each ingredient as a percentage of the weight of the flour, so the flour is always 100 percent. Each ingredient's percentage is its weight divided by the flour weight, times 100. The article's example is 10 pounds of flour and 5 pounds of water, which is 100 percent flour and 50 percent water. Because everything is measured against the flour, the percentages add up to more than 100.
What hydration is
The percentage for water is called the hydration. It tells you how sticky the dough will be and what the crumb is like. Wikipedia gives some ranges: bagels and pretzels around 50 to 57 percent, breads and rolls around 58 to 65 percent, and doughs with more water give more and larger holes. Its consistency table calls a dough under 57 percent very stiff, 57 to 65 percent stiff to firm, 65 to 70 percent soft, and 70 to 80 percent soft to slack.
How to use the sourdough calculator
- Enter the total flour in grams, including the flour that is in your starter.
- Enter the dough hydration you want, as a percent of the total flour.
- Enter the starter as a percent of the total flour, such as 20.
- Enter your starter's hydration. A starter fed equal weights of flour and water is 100 percent.
- Enter the salt percent, such as 2, and press Calculate dough.
How the starter is counted
A sourdough starter is a mix of flour and water, so adding it adds both. If the starter is 100 percent hydration, half its weight is flour and half is water. For a starter at hydration h, the flour in it is the starter weight divided by 1 plus h over 100, and the rest is water. The calculator takes the flour and the water in the starter away from the totals, so what you add is the total flour minus the starter's flour, and the total water minus the starter's water.
Worked example
You want a loaf with 500 grams of flour in total, a hydration of 75 percent, 20 percent starter at 100 percent hydration and 2 percent salt. The starter weighs 20 percent of 500, which is 100 grams, made of 50 grams of flour and 50 grams of water. The total water is 75 percent of 500, which is 375 grams, so you add 375 minus 50, which is 325 grams of water. You add 500 minus 50, which is 450 grams of flour, and 10 grams of salt. The dough weighs 500 plus 375 plus 10, which is 885 grams.
Salt and other ingredients
The Wikipedia article gives a common bread formula of flour 100 percent, water or liquid 60 percent, yeast 1 percent, salt 2 percent and oil or fat 1 percent. In a sourdough, the starter takes the place of the yeast, and 2 percent salt is a common starting point. If you add other ingredients such as seeds, work out their weight from the flour in the same way.
Choosing a hydration
Higher hydration gives a more open crumb but a stickier dough that is harder to shape. If you are new to sourdough, start at the lower end, around 65 to 70 percent, and raise the water a little each time. Whole grain flours take up more water than white flour, so the same percentage feels drier with them. Watch the dough rather than only the number.
Scaling a recipe
Because the percentages stay the same, you can scale a recipe up or down. To make two loaves, double the flour and the calculator gives you doubled amounts of everything else. To change the loaf size without changing the flavour, keep the starter percentage the same.
Changing the starter amount
The amount of starter changes the pace of the dough and its flavour. A larger share of starter ferments faster, so the dough rises sooner, while a smaller share rises more slowly and gives more time for flavour to develop. The calculator keeps your chosen hydration whatever starter percentage you use, so you can try 10 percent, 20 percent and 30 percent and see how the flour and water change. For example, with 500 grams of total flour and 75 percent hydration, 10 percent starter at 100 percent hydration means adding 475 grams of flour and 350 grams of water.
A stiff starter
If your starter is stiffer than 100 percent, such as 50 percent hydration, enter that figure. A stiff starter holds more flour and less water for its weight: a starter at 50 percent hydration is two thirds flour and one third water. The calculator works out the split, so the dough still comes out at the hydration you chose. If you keep a liquid starter at 125 percent, enter 125.
Feeding the starter for the recipe
When you build a starter for a recipe, remember that what you use must be ready. Work out the weight you need, keep a little back to feed again for next time, and feed the rest with flour and water at your usual ratio. Use the starter when it is active and risen, not when it has collapsed. The percentages here describe the amount of starter in the dough, not how to feed it.
Common mistakes
- Forgetting the flour in the starter. It counts towards the total flour.
- Forgetting the water in the starter. It counts towards the hydration.
- Mixing up the starter percentage and the starter hydration. They are different numbers.
- Measuring by cups. Baker's math needs weights.
What next
Use this often? Add Sourdough to your Home screen.
Frequently asked questions
What is a sourdough calculator?
A tool that works out the flour, water, starter and salt in a loaf from baker's percentages, counting the flour and water inside the starter.
How do I calculate sourdough hydration?
Divide the total water by the total flour, including the flour and water in the starter, and multiply by 100.
How much starter should I use?
The calculator works from the percent you choose. Twenty percent of the flour weight is a common figure to try.
What is a 100 percent hydration starter?
A starter fed with equal weights of flour and water. Half of its weight is flour and half is water.
What hydration is best for bread?
Wikipedia gives about 58 to 65 percent for breads and rolls, and says stickier, wetter doughs give a more open crumb.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.