Saved

Press the star next to a tool's name to save it.

All my tools

Shoelace Length Calculator

Use this shoelace length calculator to find the lace you need for a basic criss-cross from the eyelet pairs, the spacings and the free ends, in inches or centimetres.

Restored your last values ·

pairs

Choose US or metric units. Enter the number of eyelet pairs, the spacing across a pair, the spacing between pairs, the free end on each side, and optionally the first horizontal thread. This is for basic criss-cross lacing.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose units, enter the eyelets and the spacings, then press Calculate.

See full result

A shoelace length calculator tells you how long a lace has to be for your shoes. Enter the number of eyelet pairs, the spacing across and between them and the free ends, and it adds up the diagonals of a basic criss-cross lacing, the first thread and both free ends to give the total length.

How to use the shoelace length calculator

  1. Choose US or metric units.
  2. Enter the number of eyelet pairs, from 3 to 9.
  3. Enter the horizontal and vertical spacing and the free end on each side.
  4. Add the initial threading if you know it, or leave it blank, then press Calculate.

The formulas

The tool uses two formulas. The length of one diagonal is the square root of the horizontal spacing squared plus the vertical spacing squared, which is the Pythagorean theorem for the right triangle formed by the two spacings [1]. The total length is the length of the diagonals, plus the initial threading, plus twice the free end length. The calculator follows both formulas, and shows each part separately so that you can see where the length goes.

Diagonals in a criss-cross

In a basic criss-cross, each gap between two neighbouring pairs of eyelets is crossed by two diagonals. A shoe with 5 pairs has 4 gaps and so 8 diagonals. The general rule of 2 × (pairs − 1) diagonals is our own working from the pattern, in which the laces simply criss-cross as they work their way up the shoe [2].

A worked example

Take 5 pairs, a horizontal spacing of 6 cm, a vertical spacing of 2 cm, free ends of 15 cm and an initial thread of 6 cm. One diagonal is the square root of 40, or 6.3246 cm. The 8 diagonals add up to 50.596 cm. The total is 50.596 + 6 + 30 = 86.60 cm. Rounded up to a common lace size, about 90 cm is needed.

The first horizontal thread

The initial threading is the horizontal part that is threaded at the start, and in the example above it is equal to the horizontal spacing of 6 cm. It does not always have to be equal. The calculator therefore takes the horizontal spacing when you leave the box blank, and uses your own figure when you enter one, including 0 if the lace starts at the first eyelet.

Free ends

The free ends are the lengths left over on each side after the last eyelet. The example above uses 15 cm on each side for a knotted end. A larger bow or a double knot needs more, and a lace tucked into the shoe needs less. Measure the free end that you like, and enter it for one side, because the formula counts it twice.

US and metric units

The formulas work in any length unit. The tool offers inches, which is the default, and centimetres, and the logic is the same. As an example in inches, 5 pairs with a horizontal spacing of 2.4 inches, a vertical spacing of 0.8 inches and free ends of 6 inches give 34.64 inches. Measure the spacings on your own shoes in the unit that you choose.

Rounding up to a lace size

The calculator also suggests the next common length up. In centimetres, the list is 45, 60, 75, 90, 105, 120, 140 and 160. In inches, it is 27, 30, 36, 40, 45, 54, 60, 63 and 72. These lists are our own rounding aid, and shops sell other lengths, because the length that you need varies with the type of lacing and the type of lace [3]. The example above, 86.60 cm, rounds up to 90 cm, the next size in our list.

Lacing styles not covered

Other lacing methods use different amounts of lace: Ian's Shoelace Site notes, for example, that the Supernova method needs the maximum shoelace length [2]. We therefore built the basic criss-cross only. Other styles use different diagonal lengths, so do not use this result for them without checking the lace against the shoe.

Measuring your shoe

Measure the horizontal spacing between the two eyelets of one pair, centre to centre. Measure the vertical spacing from one pair to the next. Use the same spacing for all pairs, or an average if they differ. The calculator accepts 3 to 9 whole pairs, and the example above has 5.

Choosing a lace in a shop

Lace packs show a length in centimetres or inches. Work out the total, then choose the next length up. A lace that is a little long can be used with a bigger bow or tucked in, but a lace that is too short cannot be fixed, so rounding up is the safer choice. This advice is our own.

Changing one number at a time

The free ends have the biggest effect, because each centimetre that you add on one side adds two to the total. Each extra pair of eyelets adds two diagonals. With a horizontal spacing of 6 cm, a vertical spacing of 2 cm and 15 cm free ends, 6 pairs give 10 diagonals of 6.3246 cm and a total of 99.25 cm, against 86.60 cm for 5 pairs.

Checking against your old laces

Take the lace that is in the shoe now, pull it straight and measure it from tip to tip. If you tie it the way you like, the figure should be close to the total from the calculator. If it is not, check the free end and the initial thread first, because they are the numbers that people estimate most loosely.

Common mistakes

  • Measuring the spacing along the shoe's edge. Measure from the centre of one eyelet to the next.
  • Entering both free ends as one figure. Enter the length for one side.
  • Counting the eyelets instead of the pairs. A shoe with ten holes has 5 pairs.
  • Using the criss-cross result for another style. Other styles need a different count.

What next

Use this often? Add Shoelace Len to your Home screen.

Frequently asked questions

What is a shoelace length calculator?

A tool that adds up the diagonals, the first thread and the free ends of a lacing to give the lace length you need.

What is the formula for lace length?

Total length = the diagonals + the initial threading + twice the free end length. One diagonal is the square root of the horizontal spacing squared plus the vertical spacing squared.

How many diagonals are there in a criss-cross?

For basic criss-cross lacing, 2 × (pairs − 1) diagonals. This count is our own working: 5 pairs have 4 gaps and so 8 diagonals.

What if I leave the initial threading blank?

The calculator uses the horizontal spacing. Enter your own figure, or 0, if your lacing starts differently.

Does it work for other lacing styles?

No. Only basic criss-cross lacing is covered, because other styles use the lace differently and need their own formulas.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters