A scale converter changes a real-world length into the matching length on a scale model, or a model length back into real size. Choose a scale such as 1:87 (HO) or 1:48, enter a length, and the converter shows the answer in millimetres, centimetres, metres, inches and feet, plus how many real feet one inch on the model represents.
How model scales work
Wikipedia defines the scale of a model as the ratio of any linear dimension of the model to the equivalent dimension on the full-size subject, called the prototype. A scale written 1:8 means that one length unit on the model represents eight of the same units on the prototype. So at 1:48, which Wikipedia describes as 1 inch to 4 feet, every inch on the model stands for 48 inches, or 4 feet, of the real thing.
The scale formula
Model length = real length ÷ scale number
Real length = model length × scale number
The scale number is the n in 1:n. The converter changes your length to metres, divides or multiplies by n and converts the answer to the unit you choose.
How to use the scale converter
- Choose the direction: real size to model size, or model size to real size.
- Choose the scale. Pick Other to type any ratio, such as 50 for 1:50.
- Enter the length and the unit you measured it in.
- Choose the unit for the answer and press Calculate.
Common model scales
- 1:48 is known as quarter-inch scale, because a quarter of an inch equals one foot. It is the American O scale.
- 1:64 is the same as S scale, and Matchbox and Hot Wheels use this scale.
- 1:72 means 1 inch in the model is 6 feet, about a person's height, in the real world.
- 1:87 is often used to describe HO scale for model trains.
- 1:120 is TT scale, derived from 1 inch equals 10 feet.
- 1:160 is used for American and European model trains in N scale.
- 1:220 is the same as Z gauge.
- 1:43 is still the most popular scale for die-cast cars worldwide, and it originates from British O scale.
All of these descriptions come from Wikipedia's list of scale model sizes. Architectural models use scales such as 1:12, 1:24, 1:48, 1:50, 1:100 and 1:200.
Worked examples
- A 40-foot boxcar in HO (1:87): 40 ft is 480 inches, and 480 ÷ 87 = 5.52 inches long on the model.
- A 3-inch model at 1:48: 3 × 48 = 144 inches, which is 12 feet in real life.
- A 10-metre building at 1:100: 10 cm on the model.
- A 6-foot person at 1:72: 1 inch tall.
Area and volume
A scale applies to lengths. When every length shrinks by n, an area shrinks by n squared and a volume by n cubed. A 1:10 model has one hundredth of the floor area and one thousandth of the volume of the real thing. This matters when you work out paint, materials or the weight of a model. Divide areas by n² and volumes by n³, not by n.
Choosing a scale
A larger scale number makes a smaller model. If you want a model to fit a shelf, divide the real length by the space you have to find the smallest scale number that fits. For example, a 30 m ship on a 60 cm shelf needs a scale of at least 1:50. For model railways, the scale also sets the width of the track, so use the scale your layout is built for. For unit conversions see the length converter, and for ratios the ratio calculator.
Building a model from real measurements
Model makers often start from the real dimensions of a building, a vehicle or a ship. Measure or look up the real length, width and height, then convert each one with the same scale. Keep a list of the model sizes as you go, because a mistake in one dimension is easy to spot when the numbers are side by side. If you print a plan, check one known length on the printout with a ruler to be sure that the printer did not resize it.
Working out the real size of a model
The converter also works in reverse. If you have a model and know its scale, measure it and choose model size to real size. This is useful for checking whether a figure or a vehicle you want to buy is the right size for a layout, or for estimating the size of a real object from a model in a museum. A model locomotive that measures 25 centimetres long at HO scale represents a real locomotive about 21.75 metres long.
Mixing models of different scales
Models in different scales do not look right side by side, because the same real object appears at different sizes. A car at 1:43 is about twice as long as the same car at 1:87. If you build a scene, keep every model at the same scale. If you must mix them, keep each scale in its own part of the scene so that the difference is less noticeable.
Common mistakes
- Dividing when you should multiply. Real to model divides; model to real multiplies.
- Mixing units. Convert feet to inches before you think in 1 inch to so many feet.
- Scaling areas by the plain ratio. Use the square.
- Confusing scale and gauge. Gauge is the track width, which follows from the scale.
What next
Use this often? Add Scale to your Home screen.
Frequently asked questions
How does a scale converter work?
It divides a real length by the scale number to get the model length, or multiplies a model length by the scale number to get the real length.
What does 1:87 scale mean?
One unit on the model represents 87 of the same units in real life. Wikipedia says 1:87 is often used to describe HO scale.
How big is 1:48 scale?
Wikipedia calls 1:48 quarter-inch scale, because a quarter of an inch equals one foot, and it is the American O scale.
How do you convert a model size to real size?
Multiply by the scale number. A 3-inch model at 1:48 represents 144 inches, which is 12 feet.
Does scale apply to area and volume?
Not directly. Areas change by the square of the scale and volumes by the cube.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.