Saved

Press the star next to a tool's name to save it.

All my tools

Rocket Thrust Calculator

Use this rocket thrust calculator to find the net thrust of a rocket or jet engine from the propellant mass flow, the exhaust velocity and the pressure at the nozzle exit.

Restored your last values ·

kg/s
m/s
m²
Pa
Pa

Enter the propellant mass flow rate in kilograms per second and the effective exhaust velocity in metres per second. For the pressure term, also enter the nozzle exit area in square metres and the exit and ambient pressures in pascals. Leave all three blank to use the momentum term alone.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the mass flow and the exhaust velocity, then press Calculate.

See full result

A rocket thrust calculator gives the net thrust of a rocket or jet engine from the mass of propellant it expels each second and the speed of the exhaust, with an optional correction for the pressure at the nozzle exit. Enter the mass flow and the exhaust velocity, then add the nozzle area and the two pressures if you know them.

How to use the rocket thrust calculator

  1. Enter the mass flow rate in kg/s and the effective exhaust velocity in m/s.
  2. Optionally enter the nozzle exit area, the exit pressure and the ambient pressure.
  3. Press Calculate to see the net, momentum and pressure thrust.

The thrust equation

NASA Glenn gives the thrust of a rocket engine as F = vₑ (dm/dt) + Aₑ (pₑ − p_amb), where the last term uses the exit pressure, the ambient pressure and the nozzle exit area [1]. The first part is the momentum thrust, the exhaust velocity multiplied by the rate at which mass is expelled. Wikipedia describes the same idea for rockets: thrust is the exhaust velocity relative to the rocket times the time rate at which mass is expelled [2]. The second part corrects for the pressure at the nozzle exit.

Momentum thrust

Momentum thrust is simply vₑ × ṁ. An exhaust velocity of 3,000 m/s and a mass flow of 273.6 kg/s give 820,800 newtons. We use 3 km/s as an illustrative effective exhaust velocity for a liquid-propellant rocket; it is a planning figure, not a measured one. The result is shown in newtons and in kilonewtons, so a big engine does not produce a long string of digits.

Pressure thrust

The pressure term is Aₑ (pₑ − p_amb). If the exhaust leaves the nozzle at a lower pressure than the air around it, the term is negative and takes away from the thrust. If the exit pressure is higher, the term adds thrust. For example, with an exit area of 1.227185 m², an exit pressure of 84,424 Pa and an ambient pressure of 101,325 Pa, the pressure term is about −20,741 N. Calling these cases over-expanded and under-expanded is our own wording.

Worked example

Take a first-stage engine in the class of the Merlin 1D. Divide 44,320 kg of propellant by a 162 s burn to get 273.6 kg/s, then add 820,800 N of momentum thrust to −20,741 N of pressure thrust for a net of about 800,059 N, or 800 kN. The calculator reproduces that figure.

Mass flow rate

The mass flow rate is the mass expelled per unit time. A simple estimate divides the total propellant mass by the burn time. You can do the same: a stage with 2,000 kg of propellant that burns for 40 s expels 50 kg every second on average. This is an average, so it hides the throttling and thrust changes that happen in a real burn.

Effective exhaust velocity

Here vₑ is the effective exhaust velocity at the nozzle, and the calculator takes it as an input. In practice it is taken from engine data. Because the calculator uses the pressure term as well, the thrust per kilogram of propellant per second, shown in the working line, will differ from vₑ whenever the pressure term is not zero. That figure is our own working, not from either page.

Altitude and ambient pressure

Ambient pressure falls as a rocket climbs, so p_amb gets smaller and the pressure term becomes less negative. Net thrust therefore rises with altitude, which follows from the equation [1]. To see the effect, run the calculator twice with the same engine data, once with 101,325 Pa and once with a much lower value, and compare. The momentum term does not change in this simple model.

What the pages do not say

The sources do not give a formula for the exhaust velocity or a method for finding the exit pressure, and the Wikipedia page on thrust gives only the momentum form for rockets [2]. We do not compute specific impulse or thrust-to-weight here. The result is the single-number thrust from the stated equation, so use manufacturer data for any real engine, and treat it as an estimate.

Using the calculator

Enter the mass flow and the exhaust velocity first. If you only know these two, leave the other three boxes empty, and the page uses the momentum term alone and says so. If you give any of the three pressure inputs you must give all three, because a partial set cannot give a meaningful pressure term. Then press the button, and read the net, momentum and pressure thrust.

Reading the three results

The net thrust is the number to compare with an engine data sheet. The momentum thrust shows how much of it comes from the exhaust alone, and the pressure thrust shows the correction for the air around the nozzle. If the pressure thrust is a large negative share of the momentum thrust, the nozzle is badly matched to the ambient pressure, which is why launch engines and vacuum engines use different nozzles.

Common mistakes

  • Mixing units. Use kilograms per second, metres per second, square metres and pascals.
  • Entering gauge pressure. Both pressures should be absolute.
  • Forgetting the pressure term at sea level. It can subtract several percent of the thrust.
  • Treating the result as a flight prediction. Thrust changes through a burn.

What next

Use this often? Add Rocket Thrus to your Home screen.

Frequently asked questions

What is a rocket thrust calculator?

A tool that finds the thrust of a rocket or jet engine from its mass flow rate, exhaust velocity and nozzle pressure.

What is the rocket thrust equation?

F = vₑ ṁ + Aₑ (pₑ − p_amb): the momentum thrust plus the pressure thrust.

Why can the pressure thrust be negative?

When the exit pressure is below the ambient pressure, the surrounding air pushes back on the nozzle exit and reduces the net thrust.

Does thrust change with altitude?

Yes. As ambient pressure drops, the pressure term becomes less negative and net thrust rises.

How do I find the mass flow rate?

Divide the propellant mass by the burn time, which gives an average rate.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters