Saved

Press the star next to a tool's name to save it.

All my tools

Photoelectric Effect Calculator

Use this photoelectric effect calculator to find the maximum kinetic energy of ejected electrons, the stopping voltage and the threshold wavelength from the light and the work function.

Restored your last values ·

Enter the light as a wavelength, a frequency or a photon energy, and the work function of the metal as an energy, a threshold frequency or a threshold wavelength. You get the maximum kinetic energy of the ejected electrons and the stopping voltage.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Choose the units, fill in both boxes, then press Calculate.

See full result

This photoelectric effect calculator finds the maximum kinetic energy of the electrons that light ejects from a metal, and the stopping voltage that just halts them. Enter the light as a wavelength, a frequency or an energy, and the work function of the metal, and it tells you whether any electrons are ejected at all.

How to use the photoelectric effect calculator

  1. Choose how the light is given and how the work function is given.
  2. Enter the light value and the work function value.
  3. Press Calculate to see the maximum kinetic energy, the stopping voltage and the thresholds.

The photoelectric effect

When light of high enough frequency hits a metal, electrons leave its surface. The Wikipedia article explains that the highest kinetic energy of the ejected electrons is the energy of the photon, h times the frequency, minus the work function [1]. The work function is the minimum energy needed to remove an electron from the surface of the material [1].

The formula

The maximum kinetic energy is K_max = h f − φ, where f is the frequency of the photon, φ the work function and h the Planck constant [1]. With the threshold frequency f₀ of the material, φ = h f₀, so K_max = h (f − f₀), and the effect needs f to be greater than f₀ [1].

The stopping voltage

If you apply a voltage that opposes the electrons, the current stops at one value, the stopping voltage or cut-off potential. Wikipedia states that the product of the elementary charge and the stopping voltage equals the maximum kinetic energy [1]. So a maximum kinetic energy of 0.5 electronvolts means a stopping voltage of 0.5 volts. The calculator shows both numbers, the energy in electronvolts and joules, and the voltage in volts.

Choosing your units

The light can be given as a wavelength in nanometres, a frequency in terahertz or a photon energy in electronvolts. The work function can be given as an energy, a threshold frequency or a threshold wavelength. The calculator converts everything to electronvolts using h = 6.62607015 × 10⁻³⁴ joule seconds and the exact values of the elementary charge and the speed of light [2].

A worked example

This example is our own. Take light of 250 nanometres and a hypothetical work function of 4.5 electronvolts, not the value of any real metal. The photon energy is 1,239.84 divided by 250, which is 4.9594 electronvolts, or 1,199.17 terahertz. The maximum kinetic energy is 4.9594 − 4.5 = 0.45937 electronvolts, and the stopping voltage is 0.45937 volts.

The threshold

The threshold frequency is the work function divided by Planck's constant, and the threshold wavelength is the longest wavelength that can eject an electron. For the work function of 4.5 electronvolts, the threshold is 1,088.1 terahertz, or 275.52 nanometres. Light with a longer wavelength, such as 400 nanometres, does not eject any electron, however bright it is, and the calculator says so.

Brightness does not matter

The formula shows that the maximum energy of the electrons depends on the frequency of the light and on the work function, and that the brightness of the light does not appear in it. A brighter beam may eject more electrons, but the formula gives each electron the same maximum energy. Below the threshold frequency, no electrons are ejected at all.

Looking up a work function

The Wikipedia article we read gives no work function values for particular metals. You therefore have to take the value for your metal from a table in a textbook or a data book. Different surfaces and conditions give different values, so always use the one that matches your sample, and enter it in electronvolts, or as a threshold frequency or wavelength.

Common uses

Students use the calculator to check homework on the photoelectric effect, for example to find the stopping voltage for a given wavelength or to find the threshold wavelength of a metal. Teachers can change one value at a time and see how the maximum kinetic energy responds. The same relations also apply to photocells and light sensors, where the threshold decides which colours of light can be detected.

Limits

The relation gives the maximum kinetic energy of the ejected electrons. Many electrons come out with less energy, because they lose some on their way to the surface. The calculator does not model the current, the yield per photon or the effect of temperature. It is intended for the standard textbook case of a clean metal surface in a vacuum.

Reading the three results

The result line gives the maximum kinetic energy in electronvolts and joules, and the stopping voltage. The line for the light repeats the photon energy, frequency and wavelength in all three forms, so you can use the tool as a quick converter between them. The line for the material gives the work function with its threshold frequency and wavelength. If the light is below the threshold, the tool says that no electrons are ejected, because the formula would give a negative energy [1].

Energy, frequency and wavelength

The photon energy is h times the frequency, and the frequency is the speed of light divided by the wavelength, so the energy is h c divided by the wavelength [1]. With the exact constants of the SI, h c is about 1,239.84 electronvolt nanometres, which is the number used in the worked example [2]. A shorter wavelength means a more energetic photon, and so a larger maximum kinetic energy.

Common mistakes

  • Mixing wavelength and frequency. Choose the unit that matches the number you type.
  • Using an electron energy in joules. Enter the work function in electronvolts.
  • Expecting more electrons to mean more energy. Intensity changes the number, not the maximum energy.
  • Ignoring the threshold. Below it no electrons are ejected.

What next

Use this often? Add Photoelectri to your Home screen.

Frequently asked questions

What is a photoelectric effect calculator?

A tool that finds the maximum kinetic energy of electrons ejected by light, the stopping voltage and the threshold, from the light and the work function.

What is the photoelectric equation?

K_max = h f − φ, the photon energy minus the work function, which is the same as h (f − f₀) with the threshold frequency f₀.

How do I find the stopping voltage?

It equals the maximum kinetic energy in electronvolts, so a 0.46 electronvolt energy gives a stopping voltage of 0.46 volts.

What happens below the threshold frequency?

No electrons are ejected, however intense the light is. The calculator reports this instead of a negative energy.

Does a brighter light give faster electrons?

No. Brighter light gives more electrons; the maximum energy depends on the frequency.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters