A Phillips curve calculator applies the expectations-augmented form of the curve: inflation equals expected inflation, minus a sensitivity times the gap between unemployment and its natural rate, plus any supply shock. Enter four numbers and an optional shock, and it gives the inflation rate and explains the gap [1].
How to use the phillips curve calculator
- Enter expected inflation in percent.
- Enter the sensitivity b, a positive number that you choose.
- Enter the unemployment rate and the natural rate, both in percent.
- Add a supply shock if you want, then press Calculate.
The formula
The calculator uses π = πₑ − b × (U − Uₙ) + v. Here π is inflation, πₑ is expected inflation, b is a positive constant, U is the unemployment rate, Uₙ is the natural rate of unemployment, and v is a supply shock. A Richmond Fed paper gives the expectations-augmented form, with inflation equal to expected inflation plus a slope times the gap between unemployment and the "natural rate of unemployment" [1]; here the slope is written as a negative sign in front of a positive b. The San Francisco Fed says inflation is guided by expected inflation, the unemployment gap and supply shocks [2]. The tool follows it exactly and does not add anything of its own.
What the terms mean
The natural rate is the unemployment rate at which inflation has no pressure to rise or fall, often called the NAIRU. When unemployment is below it, the labour market is tight and the formula pushes inflation above what people expect. When unemployment is above it, inflation is pushed below. The San Francisco Fed lists supply shocks as one of the three forces [2]. A sudden jump in oil prices is our own example of such a shock: it moves inflation regardless of the labour market.
A worked example
These sources give no numerical example for this form, so this one is our own working. With expected inflation of 2 percent, b of 0.5, unemployment of 6 percent and a natural rate of 5 percent, the gap is 1 point. Inflation is 2 − 0.5 × 1 + 0, which is 1.5 percent. With a supply shock of 0.5 points, it is 2 percent. If unemployment is 4 percent, the gap is −1 and inflation is 2.5 percent.
Reading the gap
The result includes a sentence about the gap. A positive gap, with unemployment above the natural rate, lowers inflation compared with what was expected, by b times the gap. A negative gap raises it. A gap of zero means that inflation is expected inflation plus the shock. This makes the trade-off visible: in the model, lower unemployment goes with higher inflation, and the strength of that link is set by b.
Choosing b
The formula treats b only as a positive constant, and we give no value and do not estimate it. It is your assumption. A small b means that inflation reacts little to the gap, and a large b means that it reacts strongly. Try several values, such as 0.25, 0.5 and 1, to see how sensitive the result is. In real work, economists estimate b from data, and the estimates differ between countries and periods.
The other versions
Other versions describe the original relationship between wage growth and unemployment, and a New Keynesian form in which inflation depends on expected future inflation and the output gap [3]. We built only the version above. The traditional form needs a function of unemployment that we could not pin down to one definition, and the New Keynesian coefficient is written in several ways, so we left both out. Our tool does not apply them, and it does not claim to.
Expected inflation
Expected inflation is what people believe prices will do, and it is the starting point of the formula. If expectations rise by one point, the result rises by one point, with the gap and shock unchanged. This is the idea behind the expectations-augmented curve: a lasting trade-off between inflation and unemployment is not guaranteed, since expectations adjust. The tool shows the mechanical effect only.
Negative inflation
The result can be negative if unemployment is far above the natural rate or b is large. That means falling prices in the model, which is deflation. The tool does not stop you from entering such numbers, and it prints a minus sign. Unemployment and the natural rate cannot be negative, so the tool rejects those, while expected inflation and the supply shock can be any number.
Limits of the model
The curve is a stylised description. Real inflation is affected by exchange rates, productivity, policy and global events, and the natural rate itself cannot be observed directly and changes over time. Use the result to understand how the model works, for a lecture or an assignment, and not to predict a real economy.
Using the calculator
Start with the numbers from your textbook problem, and press Calculate. Check the explanation line, which writes out the formula with your numbers, and the gap sentence. Change one input at a time, to see the effect of each. If your problem uses percent signs or decimals, keep them consistent: enter 2 for 2 percent, not 0.02, because the result is shown as a percentage.
Where the curve comes from
A 1958 paper by Phillips studied the relationship between money wage changes and unemployment in the United Kingdom, and in the late 1960s Friedman and Phelps made separate arguments for why the long-run curve should be vertical at the natural rate [1]. We use only the final form with those two additions. The history is useful background for a course, but the calculator needs none of it: it takes the four numbers you give and applies the one expression shown above, step by step.
Common mistakes
- Entering rates as decimals. Enter 2 for two percent, not 0.02.
- Using a negative b. The formula expects a positive constant.
- Mixing up U and the natural rate. The gap is U minus Uₙ.
- Treating the output as a forecast. It is a textbook model.
What next
Use this often? Add Phillips Cur to your Home screen.
Frequently asked questions
What is a Phillips curve calculator?
A tool that applies the Phillips curve formula to find inflation from expected inflation, the unemployment gap and a supply shock.
What is the Phillips curve formula used here?
Inflation equals expected inflation minus b times unemployment minus the natural rate, plus a supply shock.
What value of b should I use?
The formula gives no value; it treats b as a positive constant. It is your assumption, so try several values and see how much the result changes.
Does the Phillips curve calculator forecast inflation?
No. It is a textbook model for learning. Real inflation depends on many other factors.
Which versions of the curve are included?
Only the expectations-augmented, or new classical, form. The wage-growth and New Keynesian forms are not included.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.