An optimal hedge ratio calculator tells you what share of an exposure to hedge with futures so that the risk of the combined position is as small as possible. Enter the correlation between the changes in the spot price and the futures price, and the standard deviation of each, and the calculator gives the ratio. It uses the minimum-variance hedge ratio taught in university futures-hedging notes,[1] and everything runs in your browser.
How to use the optimal hedge ratio calculator
- Enter the correlation between the price changes of the asset you hold and of the futures contract. It must be between −1 and 1.
- Enter the standard deviation of the spot price changes.
- Enter the standard deviation of the futures price changes, measured over the same period and in the same way.
- Press Work out the hedge ratio.
The formula
The optimal hedge ratio is the correlation multiplied by the standard deviation of the spot price changes and divided by the standard deviation of the futures price changes.[1] Take a correlation of 0.83, the spot standard deviation is 0.05 and the futures standard deviation is 0.072, so the ratio is 0.83 times 0.05 divided by 0.072, which is about 0.58. This means that the hedger should take a futures position equal to about 58 percent of the size of the exposure, not a full 100 percent. The same notes show a similar case, where a ratio of 0.778 means hedging 77.8 percent of the exposure.[1]
Why the answer is not always one
A full hedge, which uses a futures position equal to the exposure, is only the best choice when the two prices move perfectly together and with the same size. The course notes say that it is not always optimal to hedge so that the ratio equals 1.0.[1] In practice the futures price may move by a different amount, or the link between the two may be weaker than perfect. A weaker correlation or a more volatile futures price lowers the ratio, because taking a bigger futures position would add more noise than it removes. The formula finds the position that leaves the least variation in the value of the combined position.
Reading the ratio
A ratio of 1 means a full hedge, and a ratio of 0.58 means a partial hedge. A ratio of 0 means that futures do not help, because the prices are not related. A negative ratio means that the two prices move in opposite directions, so the hedge would have the opposite sign. The calculator gives the ratio only, not a number of contracts. The course notes give the number of contracts as the ratio times the size of the position being hedged, divided by the size of one futures contract,[1] so multiply the ratio by the size of your exposure, divide by the size of one contract, and round to a whole number.
Where the inputs come from
The correlation and the standard deviations are usually estimated from past price changes. The notes define both standard deviations on the changes in price from one period to the next,[1] so take the changes in the spot price and in the futures price over the same intervals, for example daily or weekly changes, and calculate the correlation and the standard deviations from them. A spreadsheet can do this. The longer and more representative the history, the more reliable the estimate, but the relationship can change over time, so check it from time to time.
Basis risk
Even with the best ratio, a hedge usually leaves some risk, which is called basis risk. The basis is the difference between the cash price of the asset and the futures price, and it is not known in advance, so it adds a layer of risk on top of the price risk.[1] If the correlation is high, the remaining risk is small, and if it is low, the hedge removes little. The ratio makes the risk as small as it can be, but it cannot remove it.
Tips
- Measure both standard deviations over the same period and in the same units.
- Use changes in prices, not the price levels themselves.
- Re-estimate the ratio when markets change.
- Remember that costs, margin requirements and the roll of contracts are not part of the formula.
A worked example with contracts
Suppose a farmer expects to sell 50,000 bushels of grain in three months and wants to hedge the price with futures. Over the past year, the weekly changes in the local price and in the futures price have a correlation of 0.9. The standard deviation of the local changes is 0.12 and that of the futures changes is 0.15. The optimal hedge ratio is 0.9 times 0.12 divided by 0.15, which is 0.72. The farmer should therefore hedge 72 percent of the exposure, which is 36,000 bushels. If one futures contract covers 5,000 bushels, that is 7.2 contracts, so the farmer would trade 7 contracts. These numbers are our own illustration of the method and not a recommendation.
How good is the hedge
The square of the correlation shows roughly how much of the variation in the spot price changes the hedge can remove. This is our own working, not a statement from the source. With a correlation of 0.9, the square is 0.81, so about 81 percent of the variation is removed and 19 percent remains. With a correlation of 0.5, the square is 0.25, and the hedge would remove only a quarter of the variation. This is a good way to judge whether a futures contract is a suitable tool for a given exposure, or whether another contract that follows the asset more closely would work better.
When to use a different approach
Common mistakes
- Using price levels instead of changes. The inputs describe the changes.
- Swapping the two standard deviations. The spot one is on top.
- Assuming a ratio of one. The best ratio is often lower.
- Treating the ratio as a number of contracts. It is a proportion.
What next
Use this often? Add Optimal Hedg to your Home screen.
Frequently asked questions
What is an optimal hedge ratio calculator?
A tool that works out the proportion of an exposure to hedge with futures to make the risk of the combined position as small as possible.
What is the formula for the optimal hedge ratio?
The correlation times the standard deviation of the spot price changes, divided by the standard deviation of the futures price changes.
Why is the optimal hedge ratio often less than one?
Because the futures price may be more volatile than the spot price, or the link between them may be weaker than perfect, so a full hedge adds noise.
Does the ratio give the number of contracts?
No. It is a proportion. Multiply it by the size of your exposure and divide by the size of one contract to get a number of contracts.
Can the hedge ratio be negative?
Yes, if the two prices tend to move in opposite directions.
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.