Saved

Press the star next to a tool's name to save it.

All my tools

Online Tuner (Guitar)

Allow microphone access and play a string, and this online guitar tuner shows the note, how many cents you're off, and whether to tune up or down. No app needed.

Restored your last values ·

Play one string at a time, and let it ring.

Sound is analyzed on your device. Nothing is recorded or uploaded.

Closest string

Press Start tuner, and allow the microphone.

Recent results

An online guitar tuner lets you get in tune without buying a clip-on tuner or installing an app. Press Start, allow your browser to use the microphone and pluck a string. This online guitar tuner listens for the pitch, tells you which string you're closest to, and shows how far above or below the correct note you are. Turn the tuning peg until the marker reaches the center and the display says you're in tune. The sound is analyzed on your own device, and nothing is recorded or sent anywhere, so you can use it wherever you play.

How to use the online guitar tuner

  1. Choose your tuning.
  2. Press Start tuner, and allow the microphone.
  3. Play one open string and let it ring.
  4. Turn the peg until the marker is in the middle.
  5. Repeat for each string, and then check them all again.

Standard guitar tuning

StringNoteFrequency
6th (thickest)E282.41 Hz
5thA2110 Hz
4thD3146.83 Hz
3rdG3196 Hz
2ndB3246.94 Hz
1st (thinnest)E4329.63 Hz

Guitar tunings are the assignment of pitches to the open strings. By convention, notes are listed from the lowest-pitched string to the highest. Drop D lowers only the sixth string, from E2 down to D2, which gives a heavier sound and makes some chords easier to play.

How the tuner works

A plucked string vibrates a set number of times every second, and that number is its frequency in hertz. The microphone captures the sound as a wave. The tuner compares the wave with a slightly delayed copy of itself, a method called autocorrelation, and it looks for the delay at which the two line up. That delay is the length of one cycle, which gives the frequency. The tool then finds the nearest string in your tuning and measures the difference in cents.

What are cents?

A cent is one hundredth of a semitone, the step between two neighboring notes. The formula for the distance between two frequencies is cents = 1200 × log₂(f ÷ target). A note that's 50 cents off is halfway to the next note, and it will clearly sound wrong. This tuner treats anything within 5 cents as in tune, a difference that most listeners can't hear.

A worked example

Suppose that you play your A string and the tuner reads 116.5 Hz. The target is 110 Hz, so the string is about 100 cents sharp, which means that it's a full semitone too high. The tuner says to tune down. Loosen the peg slowly and pluck again. When it reads close to 110 Hz, the marker settles in the center, and the display changes to In tune.

Tips for accurate tuning

  • Find a quiet place. Background noise can confuse the reading.
  • Move closer to the microphone, or play a little louder.
  • Pluck firmly, once, and let the note ring.
  • Tune up to the note. If you're sharp, go below first, then come up.
  • Check every string twice, because each change alters the tension on the neck.
  • Stretch new strings, as they go out of tune quickly at first.

If the tuner doesn't respond

Your browser has to ask for permission before it can use the microphone. If you blocked the request, open your site settings and allow it. Close other programs that may be using the microphone, and if you have more than one, check which is selected. On phones, make sure that the case isn't covering the microphone. Some Bluetooth headsets give poor results, so use the device's built-in microphone if you can.

Why low strings can be harder

Low notes vibrate more slowly, and small phone and laptop microphones don't pick them up as well as higher ones. If the reading jumps around on your sixth string, bring the guitar closer, and pluck near the middle of the string. Harmonics can sometimes confuse any tuner, so a clean single note gives you the most reliable result.

Is my audio recorded?

No. The microphone stream is analyzed in small slices on your device, and it's thrown away immediately. Nothing is stored or uploaded. Press Stop when you've finished, and your browser will stop using the microphone.

How often should I tune?

Check your tuning every time you pick up the guitar. Temperature and humidity can change the tension of the strings and the shape of the wood, so an instrument can drift even when it's sitting in its case. If you play for a long time, check it again partway through, because vigorous playing can pull strings slightly out of tune.

Common mistakes

  • Tuning the wrong string. Check the note name that's displayed.
  • Playing two strings at once. Mute the others.
  • Turning the peg too fast. Small movements make a big difference.

Warm up your fingers with the typing speed test, check your computer with the screen resolution checker, and share a note with the QR code generator.

What next

Use this often? Add Online Tuner to your Home screen.

Frequently asked questions

How does the online guitar tuner work?

It listens through your microphone, finds the frequency of the note, and compares it with the nearest string.

What are the notes of standard tuning?

From lowest to highest: E2, A2, D3, G3, B3 and E4.

Why does it need my microphone?

It has to hear the string in order to measure its pitch.

Is my audio recorded?

No. It's analyzed on your device and discarded immediately.

What is drop D tuning?

It's standard tuning with the sixth string lowered to D2.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Education Tools