A lightning distance calculator estimates how far away a storm is from the delay between the flash and the thunder. Count the seconds, enter them, and it gives the distance in miles or kilometres, the usual rule of thumb for comparison and a short safety note.
How to use the lightning distance calculator
- Choose US or metric units.
- Enter the seconds between the flash and the first thunder.
- Add a speed of sound only if you want to override the default.
- Press Calculate.
The flash-to-bang method
Light reaches you almost instantly, while sound travels slowly, so the delay between the flash and the thunder grows with distance. The distance is the number of seconds multiplied by the speed of sound [1]. The flash gives the start time, because light travels so much faster that you see it almost instantly [1].
The speed of sound
The speed of sound in dry air at 20 °C is approximately 343 metres per second, or 1,130 feet per second [1]. The calculator uses 343 m/s unless you enter another value.
A worked example
For a delay of 15 seconds, the distance is 15 × 343 = 5,145 metres, which is 5.145 km or 3.197 miles. The rule-of-thumb figures for the same delay are 3 miles or 5 km. Choose metric, type 15 and the result line reads about 5.145 km. The small difference from 5 km comes from the rounding in the rule of thumb.
The rule of thumb
To estimate the distance in miles, divide the seconds by five, as the National Weather Service advises, since thunder takes about five seconds to travel a mile [2]. For kilometres, divide by three [1]. Wikipedia describes the same thing as approximately three seconds per kilometre, or 4.8 seconds per mile [1]. The calculator prints the rule-of-thumb figure next to the calculated one, so you can see that they agree within a few percent.
Why it is only an estimate
The delay is measured by eye or by a phone, and counting by hand is imprecise. The speed of sound also depends on the air temperature, so the true figure can differ from the default, which is for dry air at 20 °C [1]. Thunder can be echoed or blurred by terrain and by the lightning channel being long. Use the answer to judge the trend, not to promise a safe distance.
Counting the seconds
The usual way to count is to say 'one thousand and one, one thousand and two' from the flash until the first sound of thunder [1]. Start counting at the flash itself. Stop at the first rumble, not the loudest one. A watch or a phone stopwatch gives a better count than the spoken method for a longer delay.
The 30-30 rule
A common safety guide is the 30-30 rule: start counting when you see lightning, and if the thunder arrives before you reach 30, the storm is close enough to be dangerous, so go to shelter. Then stay in safe shelter at least 30 minutes after you hear the last sound of thunder [3]. The calculator adds this note to its result.
Using your own speed of sound
If you know the temperature and have a better figure for the speed of sound, enter it. In metric mode, use metres per second; in US mode, use feet per second. The default of 343 m/s is for dry air near 20 °C. A cold day gives a slower sound, so the same delay means a shorter distance.
Approaching and receding storms
Take a few readings. If the delay shrinks from 30 seconds to 20 seconds and then to 10 seconds, the storm is coming closer by about a mile or a kilometre between readings. If the delay grows, the storm is moving away. Do not wait for the delay to fall to a few seconds before you act.
Staying safe
No calculator can make the outdoors safe in a thunderstorm. Treat any thunder you can hear as a sign that lightning is within striking range, and move into a building or a hard-topped vehicle. Check the warnings of your local weather service, and keep children and pets with you.
Comparing with the rule of thumb
The rule of thumb is quick and needs no calculator. Five seconds are about one mile, and three seconds are about one kilometre. Both come from the speed of sound, which is why they agree with the calculated figure within a few percent. The calculator is useful when you want the exact figure, or want to use another speed of sound for a warm or cold day.
Using the result with children and groups
Agree on a simple plan before the storm. If anyone sees a flash and counts 30 seconds or fewer before the thunder, everyone goes indoors, and nobody comes back out until 30 minutes after the last thunder. A plan that is made in advance saves arguments, and the numbers on this page give the plan a clear rule.
Common mistakes
- Starting the count at the thunder. Start at the flash.
- Dividing by three for miles. Divide by five for miles and by three for kilometres.
- Waiting until the delay is very short. Go indoors at 30 seconds or less.
- Going back out right after the last thunder. Wait 30 minutes.
What next
Use this often? Add Lightning Di to your Home screen.
Frequently asked questions
What is a lightning distance calculator?
A tool that turns the seconds between a lightning flash and its thunder into the distance of the storm.
How do you work out how far away lightning is?
Multiply the seconds by the speed of sound, about 343 metres per second, or divide the seconds by five for miles or by three for kilometres.
What is the 30-30 rule?
If thunder follows the flash within 30 seconds, take shelter, and wait 30 minutes after the last thunder.
How accurate is the estimate?
It is rough, because of counting error and the temperature of the air.
Can lightning strike from a distant storm?
Yes, so go indoors whenever you hear thunder.
Sources
Was this tool helpful?
What went wrong?
We only receive the reason you pick, never what you typed into the tool.
Thanks for your feedback.