Saved

Press the star next to a tool's name to save it.

All my tools

Hair Diffraction Calculator

Use this hair diffraction calculator to find the width of a hair from a laser pointer's diffraction pattern: the wavelength, the distance to the wall and the dark spot position.

Restored your last values ·

nm

Shine a laser pointer across a single hair onto a wall. Measure the distance from the hair to the wall, the distance from the centre of the pattern to a dark spot, and note the wavelength and which dark spot it is. You get the width of the hair in micrometres, millimetres and inches.

Everything is worked out in your browser. Nothing you type is sent anywhere.

–

–

Enter the distance to the wall, the wavelength and the distance to the dark spot, then press Calculate.

See full result

A hair diffraction calculator turns a laser pattern on a wall into the width of a human hair. Shine a laser pointer on a single hair, measure where a dark spot falls on the wall, and enter the distance to the wall, the wavelength and the distance to the dark spot. You get the width of the hair.

How to use the hair diffraction calculator

  1. Choose US or metric units.
  2. Enter the distance from the hair to the wall and the laser wavelength in nanometres.
  3. Enter the distance from the centre of the pattern to a dark spot, and which spot it is.
  4. Press Calculate.

The experiment

Science News Explores describes how to measure the width of a hair with a laser pointer and a wall [1]. You stretch a hair in the beam, so that the light makes a pattern of bright and dark spots on the wall. The distance between the dark spots depends on the width of the hair: a thinner hair makes a wider pattern. That is what the calculator uses.

The formula

The exact relation is w = n λ ÷ sin θ, and, for small angles, w ≈ n λ ÷ (x ÷ D). Here w is the width of the hair, λ the wavelength, n the number of the dark spot, x the distance from the centre of the pattern to that dark spot, and D the distance from the hair to the wall. Science News Explores defines the same quantities in words for the first dark gap [1]; the extension to the n-th spot is our own working. The small-angle form is possible because D is much larger than w.

Why it works

Wikipedia gives the first minimum of the light through a slit of width d as d sin θ = λ [2]. A hair is the opposite of a slit: it blocks light. Babinet's principle relates an opaque body to an opening of the same size and shape, and Wikipedia says the pattern from the opaque body is identical to that of the aperture [3]. The article does not say outright that a hair of width w matches a slit of width w, so that step is an assumption of the method.

Worked example

Take a red laser pointer of 650 nanometres, a wall 2 metres away and a first dark spot 2.6 centimetres from the centre. The width is 650 nanometres times 2 metres divided by 0.026 metres, which is 50 micrometres, or 0.05 millimetres. The numbers are our own example. The tool shows 50 micrometres, 0.05 millimetres and 0.00197 inches, which is a plausible width for a thin hair.

Higher dark spots

You can measure a farther dark spot to improve the precision. Measure the distance to the second or third dark spot, and set the number to 2 or 3. With the same hair, the second dark spot lies at 5.2 centimetres, and the tool gives the same 50 micrometres. A longer distance makes a given error in your ruler a smaller share of the total.

The small-angle step

The angle is small because the wall is far away, so sin θ is close to tan θ. The tool also shows the width without that step, working out sin θ from tan θ = x ÷ D. That choice is our own working, since the page does not say how θ is found from the measurements. In the example it differs from the small-angle width by only 0.00845 percent. If the angle is large, the tool tells you to prefer the exact figure.

Finding the wavelength

Science News Explores says the wavelength is usually printed on the laser pointer, and gives about 650 nanometres for red and about 532 for green [1]. Check your own pointer, since the wavelength sets the spacing of the pattern. The calculator takes the wavelength in nanometres. If you use a different laser from the one in the example, the pattern will be spaced differently, but the width that you calculate should be the same.

Measuring tips

Fix the hair taut across a hole, hold the laser still, and put the wall a few metres away so the pattern is wide enough to measure. Mark the centre of the bright middle band and the dark spot with a pencil, and measure between the marks. Take a few readings and average them. In a dim room, the dark spots are easier to see. Tape the pointer button down so that it does not move.

US units

In US mode, the distance to the wall is in feet and the spot distance is in inches. The calculator converts them with 0.3048 metres per foot and 0.0254 metres per inch, and gives the width in micrometres, millimetres and inches. The wavelength is always in nanometres. An example of 6.56 feet and 1.02 inches gives about the same 50 micrometres as the metric example.

Limits

Accuracy depends on how well you find the dark spots on the wall. Hairs are not perfectly even and are not perfectly round, and a very thick or very thin hair may give a pattern that is hard to read. The result is an estimate, good enough for a classroom demonstration, and you can compare it with a micrometer.

Common mistakes

  • Measuring from the edge of the pattern. Measure from the centre of the bright middle band.
  • Forgetting the number of the dark spot. Set it to 2 or 3 if you used a farther spot.
  • Entering the wavelength in micrometres. Use nanometres.
  • Pointing the laser at eyes. Keep the beam away from faces.

What next

Use this often? Add Hair Diffrac to your Home screen.

Frequently asked questions

What is a hair diffraction calculator?

A tool that finds the width of a hair from the laser pattern it makes on a wall.

What formula does it use?

w is about n λ divided by x ÷ D, with an exact version using sin θ.

Which dark spot should I measure?

Any, but a farther one improves the precision; enter its number.

Why can a hair act like a slit?

By Babinet's principle, an opaque object and an opening of the same size give the same pattern.

Is it safe to use a laser pointer?

Only if you never point it at anyone's eyes.

What went wrong?

We only receive the reason you pick, never what you typed into the tool.

Thanks for your feedback.

More Unit Converters